ELORA

Details

67E-...
Pipe Wrenches

for highest operational demands
head angled at 45°
drop forged, hardened and tempered
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
roll non-volatile
red laquered, polished jaws
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
according to DIN ISO 5234, Form B

show more show less

Details

68SN-...
Pipe Wrenches

Swedish type
3 point S-jaw pipe wrench for highest operational demands
head angled at 45°
drop forged, hardened and tempered
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
roll non-volatile
red laquered, polished jaws
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
according to DIN ISO 5234, Form C

show more show less

Details

464-200BI PROLOG
Spark Plug Plier

hooked jaws
for difficult to pull down spark plug sockets
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

790IN-...
Impact Screwdriver Sockets 1/2", metric

for inside hexagon screws
for power tools
special steel, phosphated
female square drive according to DIN 3121-G 12,5, ISO 1174
Attention: locking pin and locking ring are not included!

show more show less

Details

1221-L PROLOG
Tool Chest

3 ball bearing mounted drawers
individual drawer locking over the entire strip (one-hand operation)
lateral central locking of all drawers with cylinder lock
load capacity per drawer: 45 kg
drawers: 3 x 75 mm
internal drawer dimensions: 410 x 573 mm
suitable for ELORA-Nr. 1220-L und 1215-L
suitable assortments: OMS

show more show less

Details

5003N PROLOG
Pneumatic Impact Wrench Mini, 1080 Nm

extremely handy impact wrench with only 108 mm length
for work at difficult accessible areas
maximum performance at minimum weight
with vibration-damped composite housing
non-slip cold insulated handle
exhaust air guided through handle
always full capacity when loosening
clockwise 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with high-performance twin-hammer clutch system
air inlet thread 1/4‘‘
Operating pressure 6,3 bar max. sound level 85 dB (A) Lp A
average air consumption 118 l/min
recommended hose inner-Ø 8 mm
vibration acceleration 4,3 m/s²
including steel nipple
maximum loosening 1080 Nm

show more show less

Details

770-S1V
Coupler Square

for Push Through Ratchet ELORA-No. 770-S1ZI

Details

WS-10M PROLOG
Tool Assortment Electricians

suitable for tool cabinet ELORA-No. 1100L
suitable for all Roller Tool Cabinets and Work Bench 1811-L
suitable for hard protective case ELORA-No. 1380-L and hard protective trolley case ELORA-No. 1381-L
suitable for installation tool bag ELORA-No. 1385-L
suitable for cantilever tool box ELORA-Nr. 810-L

show more show less

Details

178-28
Stud Extractor

for left and right hand thread
zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
high grade tool steel C45 / 1.0503

Details

70-1
Multi Fitting Key

female square 5, 6, 7-8 mm
female three-square 8-9 mm
Multi Fitting Key: 3-5 mm
5 mm square for radiator valves
body with ¼" bit holder with magnet
dimensions: 97 x 25 mm
zinc die-casting

show more show less

Details

70-2
Multi Fitting Key, 9 in 1

for all usual technical shut-off systems
1 tool for 9 applications
8 different master cabinet shut-off systems and 5 mm square for radiator valves
flat construction due to space saving swivel mechanism
square locking: 5, 6, 7-8, 9-10 mm
three-edged locking: 7, 8-9, 10-11 mm
two-way-key 3-5 mm and half-moon locking 6 mm
securing chain with snap-hook
Dimensions: 95 x 95 mm
Zinc die-casting

show more show less

Details

70-3
Multi Fitting Key, Electrical

for closings of: pneumatic and hydraulic systems
magnetic valves in automobile- and machinery sector
magnetic valves of oil heating
contactless detection of permanent magnets
contactless voltage field sensor
implemented magnetic field sensor
dimensions: approx.: 158 x 28 mm
female square 5, 6, 7-8 mm
female three-square 9 mm
5 mm square for radiator valves
two-way-key 3-5 mm
magnetic bit adaptor 1/4", supplied with one bit PH 2
screwdriver function with retaining clip
zinc die-casting

show more show less

Details

714-6MU
Socket Set 1/4" and 1/2", combined

25 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

714-6MU OMS
Socket Set 1/4" and 1/2", combined

46 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

OMS-27L
Empty Module

empty module for OMS-27
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

730-...
Offset Key

for cross slotted screws
matt chrome plated, tip gunmetal finished
Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 5208, blade according to DIN ISO 8764-1 PH

Details

JUBI 903-S4
VDE-Plier Set in a black anniversary nylon bag with zip fastener

4 pcs.
stored in a black anniversary nylon bag with zip fastener
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900

Details

527 S10
Screwdriver Set Variant

10 pcs.
in black polyester bag
hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

740-...
Offset Key

for plain slotted screws
matt chrome plated
Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 5200, blade according to DIN ISO 2380

Details

745
Round Awl

chrome-plated blade
nonslip QUATROLIT®-2C-handle
with suspension hole
special steel

Details

746
Square Awl

chrome plated 4 square blade
nonslip QUATROLIT®-2C-handle
with suspension hole
special steel

Details

75-...
Pipe Wrenches

American type
adjustable with knurled adjustment
forged pieces hardened and tempered
teeth additionally inductive hardened and staggered in reverse order
steel-grey, handles blue coated, polished jaws
special high grade tool steel
US-Norm GGG-W-651, class A, Type 1

show more show less

Details

790S6 PROLOG
Impact Socket Sets 1/2"

for power tools
in black metal storage case with OMS-hard foam insert
tools made of special steel, phosphated
square according to DIN 3121, form F and G, ISO1174

Details

470-5
Bird Ringing Plier

for closing rings
suspension hole in one handle
nickel-plated, with dip-insulated handles
ELORA-high grade tool steel C45 / 1.0503

Details

760/761STX-...
Screwdriver Sets

6 pcs.
STX=for inside TORX® screws
STTX=for inside TORX® safety screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

760TX-...
Screwdriver

for inside TORX® screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

760TX-30/300
Screwdriver, extra long

for inside TORX® screws
for low placed screw connections e.g. instrument board and car body
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

761TTX-...
Screwdriver

for inside TORX® safety screws
with bore hole in tip
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

762-TX20/300
TORX®-Key with T-Handle, extra long

for inside TORX® screws
gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

762-TX30/300
TORX®-Key with T-Handle, extra long

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

OMS-30L
Empty Module

empty module for OMS-30
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

762TTX-...
TORX®-Key with T-Handle

for inside TORX® safety screws
with hole at drive end
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

762TX-...
TORX®-Key with T-Handle

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
TX-6 to TX-45: Chrome-Vanadium 61CrSiV5 / 1.2243
TX-50 and TX-60: Chrome-Vanadium 59CrV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

765-...
Ratchet Operated Podger Spanners

for scaffolding and constructional steel work
reversible ratchets with two different sizes, with centering tips
with lock hole Ø 5,2 mm
smallest possible swivel angle 11,25°
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

770-870-1450
Socket Converter 1/4"

matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball locking device resp. with ball retaining groove
according to DIN 3123, ISO 3316

Details

770-IN...
Socket Sets 1/2"

INM=9 pcs., INA=7 pcs.,
for inside hexagon screws
in black metal storage case with plastic insert
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422

show more show less

Details

770-KIN...
Socket Sets 1/2"

INM=12 pcs., INA=9 pcs.
for inside hexagon screws
in black metal storage case with plastic insert
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422
operation tools according to DIN 3122, ISO 3315

show more show less

Details

770-KL/770-MKL
Socket Rail 1/2''

770-KL: 15 shiftable socket clips
two holes allow permanent mounting
chrome-plated, polished
770-MKL: 14 shiftable socket clips
strong magnet enables firm mounting
black coated

show more show less

Details

770-KS.../AS...
ELORA-Big Spender

BIG SPENDER: with 2 trays and 30 zinc plated tray dividers
black powder coated
pin-up tray: with 16 zinc plated tray dividers
black powder coated
sockets: knurled, chrome-plated, polished, with ball retaining groove
sockets: Chrome-Vanadium 31CrV3 / 1.2208
sockets: 1/2" square drive according to DIN 3120/ ISO 1174, for manual drive, sizes according to DIN 3124/ ISO 2725

show more show less

Details

770-KS/AS
ELORA-Big Spender

BIG SPENDER: with 2 trays and 30 zinc plated tray dividers
black powder coated
pin-up tray: with 16 zinc plated tray dividers
black powder coated

show more show less

Details

770-KTX.../KTT...
Socket Sets 1/2"

11 pcs.
suitable for inside TORX®resp. inside-TORX®safety screws
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
socket parts according to DIN 3122, ISO 3315
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

770-KXZN...
Socket Sets 1/2"

9 pcs.
for inside multi-point screws
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

show more show less

Details

770-L SB
Plastic Holder 1/2"

appropriate for sockets nominal size 12,5 (1/2'') and operation tools with female square

Details

770-L...V
Extension Bars 1/2"

with special square for a swivle angle of 12,5° to each side
especially suitable for screw connections within confined spaces
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball locking device resp. hole

Details

770-L11-L14
Socket Converter

chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174
according to DIN 3123, ISO 3316

Details

770-L115F
Reversible Ratchet 1/2"

extra long design with slim head
forged gear wheel with safety locking and quick release button
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L115G
Reversible Ratchet with Hinge 1/2"

extra long version
180° swivelling
forged gear wheel with male and female square
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L115GF
Reversible Ratchet with Hinge 1/2"

extra long version
180° swivelling
forged gear wheel with safety locking and quick release button
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L115U
Reversible Ratchet 1/2"

extra long design with slim head
forged gear wheel with male and female square
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L16-17-18
Screwdriver Sockets 1/2"

for plain slotted screws
chrome-plated, polished
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174
with ball retaining groove

show more show less

Details

770-L1D
Reversible Ratchet 1/2"

rugged ratchet with small, slim head
forged gear wheel with male and female square
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

770-L1F
Reversible Ratchet 1/2"

rugged ratchet with small, slim head
forged gear wheel with safety locking and quick release button
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

770-L1G
Reversible Ratchet with Hinge 1/2"

180° swivelling
forged gear wheel with male and female square
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L1GF
Reversible Ratchet with Hinge 1/2"

180° swivelling
forged gear wheel with safety locking and quick release button
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L1K
Reversible Ratchet 1/2"

with small, slim head
forged gear wheel with safety locking and quick release button
smallest possible swivel angle 5°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

770-L1UN
Reversible Ratchet 1/2"

with small, slim head
forged, fine teethed wheel with grippy metal switching disk
smallest possible swivel angle 5°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

770-L1V
Coupler Square

for Push Through Ratchet ELORA-No. 770-L1Zl and for coupling 1/2 sockets to reversible ratchets ELORA-No. 770-L1D, 770-L115U, 770-L1G and 770-L115G

Details

770-L1ZI
Push Through Ratchet 1/2"

extremely rugged ratchet with round head
forged gear wheel with push through square coupler
smallest possible swivel angle 11,25°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device

show more show less

Details

770-L2
Speed Brace 1/2"

plastic handle
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

770-L20-...
Spark Plug Socket 1/2"

extra deep, with rubber insert
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

770-L21
Radiator Drain Socket

especially appropriate for Caterpillar vehicles
slot width 11 mm
female square drive according to DIN 3120-C 12,5, ISO 1174 with ball retaining groove
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

770-L3
Sliding T-Bar 1/2"

chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

Details

770-L35-L66
Extension Bars 1/2"

chrome-plated, head polished
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball locking device, resp. hole
according to DIN 3123, ISO 3316

Details

770-L7
Universal Joint 1/2"

chrome-plated, polished
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball retaining groove resp. with ball locking device
according to DIN 3123, ISO 3316

Details

770-L8
Offset Handle 1/2"

matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

Details

770-L9/770-L10...
Flexible Handles 1/2"

nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

770-LA...
Sockets 1/2", inch

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

show more show less

Details

770-LAMU/771-LAMU
Socket Sets 1/2"

28 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LIM.../771-LIM...
Socket Sets 1/2"

31 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LIND.../771-LIND...
Socket Sets 1/2"

19 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LK.../771-LK...
Socket Sets 1/2"

15 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LM...
Sockets 1/2", metric, bihexagon

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

show more show less

Details

770-LM.../771-LM...
Socket Sets 1/2"

26 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LSSMF/771-LSSMF
Socket Sets 1/2"

57 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LT...
Sockets 1/2", extra deep, metric

especially suitable for deep-set female screws on long threaded bolts
hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

show more show less

Details

770-LTA...
Sockets 1/2", extra deep, inch

especially suitable for deep-set female screws on long threaded bolts
hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

show more show less

Details

770-LTD
Socket for Injection Nozzle

appropriate for injection nozzles on Diesel engine vehicles
size 27 mm, recessed internal contour
hot-forged
chrome-plated
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

770-LTI...
Socket Sets 1/2"

18 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LTU/LTK
Socket Sets 1/2"

29 pcs.
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

770-LTXE...
Sockets 1/2", TORX®

for outside TORX®screws
hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

770-LW...
Sockets 1/2", whitworth

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

show more show less