ELORA

Details

329-...
Separators

for removing connecting rods, ball rods, drop arms etc.
massive forged pattern
handle knurled
zinc-plated
high grade tool steel

show more show less

Details

3300-...
Adaptor for Screwdriver Bits

for power tools
bit lock with spring clip
gun metal finished
ELORA-Chrome-Vanadium Steel 31Cv3 / 1.2208
female hexagon drive according to DIN 3126 D 6,3, respectively DIN 3126 D 8, DIN ISO 1173
female square drive according to DIN 3121 Form G
according to DIN 7427 Form A

show more show less

Details

331
Welder's Chipping Hammer

with steel tube handle
coated

Details

335-120
LED Lamp

compact, powerful torch, suitable for tactical use
Advanced Focus System for efficient, customised light in focussed and focussed and defocussed state
quick and easy operation with end cap switch
practical clip for attaching to shirt or trouser pocket, simultaneous roll protection
operation with three AAA alkaline batteries (included)
Luminosity: Power 300 lm / Low Power 15 lm
Lighting range (m): Power 200 m / Low Power 60 m
Lighting duration (h): Power 4 h / Low Power 25 h
Head material: Aluminum alloy
Protection class: IP54

show more show less

Details

335-27
LED Penlight

practical and powerful penlight for various applications
stepless focussing with Advanced Focus System
simple operation thanks to end cap switch
practical fastening clip on shirt or trouser pocket / also suitable as roll protection
Operation with two AAA alkaline batteries (included)
Luminosity: Power 120 lm / Mid Power 60 lm / Low Power 15 lm
Lighting range: Power 90 m / Mid Power 55 m / Low Power 25 m
Lighting duration: Power 5 h / Mid Power 9 h / Low Power 20 h
Material: Aluminium
Protection class: IP54

show more show less

Details

336-EX 35
LED Lamp, Explosion-Proof

rubberized head-lamp with reduced glare
rubberized-pressure switch for continuous and instantaneous light
electrically non-conductive housing made of ABS and polycarbonate
built-in clip holder on the lamp head
lamp type eLED, light output 35 lumens
illumination range 64 meter, burning time approx 3 hrs.
waterproof up to 1 meter
Contains 2xAAA batteries
Ex Certification Zone 1: II 2G Ex ib IIB T4 Gb, II 2D Ex ib IIIC T60 ° C Db IP6X Db

show more show less

Details

336-EX 77
LED Lamp, Explosion-Proof

rubberized head-lamp with reduced glare
rubberized-pressure switch for continuous and instantaneous light
electrically non-conductive housing made of ABS and polycarbonate
integrated lanyard hole on the lamp stem
lamp type eLED, light output 77 lumens
illumination range 100 Meter, duration of burning appr. 4 hrs.
waterproof up to 3 Meter
contains 2xAA Batteries
Ex Certification Zone 1 SEV 11 ATEX 0174 X, II 2G Ex e ib IIC T4 II 2D Ex ibD 21 T98 ° C
Accessories such as helmet holder, 90 ° angle attachment, optical fiber attachment upon request

show more show less

Details

337
LED Inspection Flashlight, slim design

slim design, perfect for inspection within limited spaces
with ergonomic handle
lamp type 15W LED COB, light flux up to 460 Lumen
continuously dimmable
2 fixings: turnable suspension hook, strong magnetic area with swivelling and clampable ball joint
rechargeable by supplied micro-USB power cable and European charger plug
with integrated 3,7V Lithium-Ion battery 2200 mAh
battery indicator: flashing red during charge, shining blue fully charged, flashing yellow running low
charging time: 4 hours
lightning duration: full power: 2,5 hours, half power: 12 hours
operating temperature: 0° to 60°

show more show less

Details

3400
Hand Operated Impact Driver 1/2"

for loosening tight screws with help of a hammer
reversible with anti-slip plastic grip
male square drive according to DIN 3120-A 12,5, ISO 1174, with ball locking device

Details

3401-S12
Hand Operated Impact Driver Set

12 pcs.
in black metal case with plastic inlet
for loosening tight screws with help of a hammer
reversible with anti-slip plastic grip
male square drive according to DIN 3120-A 12,5, ISO 1174, with locking device

show more show less

Details

3415
Hand Bit Holder 1/4"

bit lock with permanent magnet
nonslip QUATROLIT®-2C-handle
with suspension hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female hexagon drive according to DIN 3126 D 6,3, DIN ISO 1173

show more show less

Details

3426
Impact Adaptor 3/8"

for power tools
with 1/4'' outside hexagon according to DIN 3126-E 6,3, DIN ISO 1173
special steel
male square drive according to DIN 3121-E 10, ISO 1174, with locking pin
according to DIN 7428, ISO 3317

show more show less

Details

3427
Impact Adaptor

for power tools
with 1/4'' outside hexagon according to DIN 3126-E 6,3, ISO 1173
special steel
male square drive according to DIN 3121-E 12,5, DIN ISO 1174, with locking pin
according to DIN 7428, ISO 3317

show more show less

Details

3428
Bitholder 1/4"

bit lock with permanent magnet and quick clamping system
quick locker and ejection system
internal hexagon drive according to DIN 3126 D 6,3
external hexagon drive according DIN 3126 E 6,3, DIN ISO 1173

Details

3436-S36
Bit-Box 1/4"

36 pcs.
in black yellow plastic box with belt clip and suspension hole
magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3
bits made of ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
35 bits with male hexagon drive according to DIN 3126 C 6,3
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

3451-S9
Bit-Box 1/4"

9 pcs.
in black plastic box with transparent cover
magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3
bits made of ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
8 bits with external hexagon drive according to DIN 3126 C 6,3

show more show less

Details

3452ST
Bit-Box, Stainless 1/4"

19 pcs.
bit holder ELORA-No. 3428 with quick clamping system and male hexagon drive according to DIN 3126 E 6,3
bits made of stainless steel X46Cr13 / 1.4034, without galvanic surface treatment
18 bits with male hexagon drive according to DIN 3126 C 6,3

Details

350-...
Screw Extractor

for extracting broken screws and bolts with right-hand thread
chrome vanadium 58CrV4 / 1.8161

Details

3500-IS...
Screwdriver Socket 3/8"

for plain slotted screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
Female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
blade according to DIN ISO 2380-1 Form B

show more show less

Details

3510-IN...
Screwdriver Socket 3/8", metric

for inside hexagon screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422

show more show less

Details

3510-INA...
Screwdriver Socket 3/8", inch

for inside hexagon screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422

show more show less

Details

3510-INL...
Screwdriver Socket 3/8"

for inside hexagon screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422

show more show less

Details

351S 5, 352S 6, 353S 8
Screw Extractor Set

in black plastic box
for extracting broken screws and bolts with right-hand thread
chrome vanadium 58CrV4 / 1.8161

Details

3520-PH...
Screwdriver Socket 3/8"

for cross slotted screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
blade according to DIN ISO 8764-1 PH

show more show less

Details

3530-XZN...
Screwdriver Socket 3/8"

for inside multi-point B &S and XZN screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
Blade according to DIN 2325

show more show less

Details

3530-XZNL...
Screwdriver Socket 3/8"

for inside multi-point screws
suitable for inside B &S and XZN screws
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
blade according to DIN 2325

show more show less

Details

354-...
Spot Weld Cutter

to mill out spot welds without warping or tearing of the metal sheet
compatible for standard drills
interchangeable double-sided usable cutting crown
HSS

Details

355-...
Spot Weld Drill

for exact drilling of spot welds
with self-cutting centre tip
HSS

Details

359
Mounting Punch

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328

show more show less

Details

361
Slit or Car Body Chisel, extra flat

for car body work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

show more show less

Details

361HS
Hand Guard for Slit or Car Body Chisel

hand protection against impacts
no rolling away due to octagonal shape
only for ELORA-No. 361
made of impact resistant special rubber

Details

362-...
Bricklayer´s Chisel, flat oval

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7254 Form A

show more show less

Details

364-...
Point Chisel, octagonal

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7256

show more show less

Details

OMS-46L
Empty Module

empty module for OMS-46
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

show more show less

Details

365-...
Electrician

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

show more show less

Details

370-...
Snipe Nose Pliers with side cutter, straight

serrated gripping surface and side cutter
maximum stability under load of the blades by inductive hardening
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

371-...
Snipe Nose Pliers with side cutter, bent

45° bent, serrated gripping surface and side cutter
maximum stability under load of the blades by inductive hardening
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

372-...
Internal Extractor

for extracting close-fitting ball-bearings over the inner bearing ring
to use with counter support ELORA-No. 373
gunmetal-finish
high grade tool steel

Details

373-...
Counter Supports

counter support for internal extractor ELORA-No. 372
zinc-plated, spindle gunmetal-finish
high grade tool steel

Details

376-160
Flat Nose Plier

for holding and bending
long, flat jaws, rippled serrated surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

377-160
Round Nose Plier

long jaws, serrated gripping surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

Details

714-6MU OMS PROLOG
Socket Set 1/4" and 1/2", combined

46 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

383-J0-J4
Circlip Pliers for internal retaining ring

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

show more show less

Details

383-J01-J41
Circlip Pliers for internal retaining ring

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

show more show less

Details

384-A0-A4
Circlip Pliers for external retaining ring

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

show more show less

Details

384-A01-A41
Circlip Pliers for external retaining ring

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

show more show less

Details

385
Hand Lever Grease Gun

high-quality industrial design with short stroke
continuous fixation, air release valve on the pump head
fat lead by means of spring force in the press head
dummy lubrication excluded
Working pressure 400 bar, test pressure 800 bar, capacity about 1.9 cc / stroke
filling can be done with bulk grease (500cc) or cartridge (400g)
incl. reinforced hose (1000 bar burst pressure) and hollow nozzle
housing made of steel, painted silver, black plastic handle

show more show less

Details

389-...
Heavy Duty Side Cutter

high cutting performance with minimal effort
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

Details

392-...
Side Cutter

oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

Details

395-...
Combination Pliers

strong edition for tough conditions
maximum stability under load of the blades by inductive hardening
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

Details

OMS-2L
Module- Socket Set 1/4

empty module for OMS-2
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

1200-L PROLOG
Servicecar BUGGY 100

solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
surface with rubber mat
2 swivel castors
Shelf 460 x 705 mm
total loading capacity 300 kg

show more show less

Details

JUBI 770/771-OKLMU Spezial PROLOG
Socket Set 1/2" in black metal storage case with OMS hard foam insert

25 pcs.
in black metal storage case with OMS hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

show more show less

Details

243MB-1
Balance Weight Plier

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
with plastic head on the hammer side, especially for painted weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

OMS-33L
Module-Combination Spanner with Ring Ratchet, reversible

empty module for OMS-33
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

400B-...
Letter Punch Sets

27 pcs.
for driving letters by impact into steel
27 capital letters, from A to Z and ''&''
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

Details

400Z-...
Number Punch Sets

9 pcs.
for driving numbers by impact into steel
9 numbers from 0-9
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

Details

401/1-...
American Tinmans Shears

for long straight cuts
blades additionally inductive hardened and ground, 57-59 HRC
adjustable, bolted joint
high grade tool steel, forged
with trap protection

show more show less

Details

402-...
Shape Cutting Lever Tin Snips

for figures, short and straight cuts
with leverage
self-opening due to mounted leaf spring, with lock
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground
nonslip 2C-handles with trap protection
for metal sheet thickness of max. 1,2mm with a tensile strength of 600 N/mm²

show more show less

Details

402/1 S3
Shape Cutting Lever Tin Snip Set

3 pcs.
carton box packed
for figures, short and straight cuts
with leverage
self-opening due to mounted leaf spring, with lock
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground
nonslip 2C-handles with trap protection
for metal sheet thickness of max. 1,2 mm with a tensile strength of 600 N/mm²

show more show less

Details

404-S3
Mechanic's Plier Set

3 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

Details

404-S31
Mechanic's Plier Set

3 pcs.
carton box packed
chrome-plated, polished

Details

404-S4
Electrician's Plier Set

4 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

Details

404-S41
Circlip Plier Set

4 pcs.
carton box packed
chequered handles
chrome-plated, polished joint

Details

404-S8
Circlip Plier Set

8 pcs.
assortment in convenient plastic case
chrome plated, polished joint, chequered handles

Details

1430-MU PROLOG
Socket Set 1/4"

MU=16 pcs., AU=14 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

Details

5280-ST
Electronic Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

406-...
Tube Bending Pliers

for bends up to 90°
for thin-walled bendable steel pipes or copper pipes
with plastic handle protectors

Details

407
Tube Bending Plier

for dimensions from 4,75 – 10 mm (3/16“ – 3/8“) Ø up to 90°
for soft copper pipes EN 1057, Ne-metal pipes as well as thin-walled precision steel pipes and brake lines
with 2 turnable bending dies 3/16”, ¼” and 5/16”, 3/8”

Details

408
Step Arbor

for expanding copper tubes
black, made of special steel

Details

4100-IS...
Screwdriver Bits 1/4"

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-1

Details

4110-IN
Screwdriver Bits 1/4"

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-3

Details

4120-PH...
Screwdriver Bits 1/4"

for cross slotted screws PH
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH

Details

4130-PZ...
Screwdriver Bits 1/4"

for cross slotted screws PZ
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ

Details

4140-50
Adaptor 1/4"

for power tools
male square drive according to DIN 3121 E 6,3, ISO 1174 with locking pin, according to DIN 7428, ISO 3317
with ball locking device

Details

4150-...
Bitholder 1/4"

bit lock with permanent magnet resp. spring clips
with stainless steel sleeve, diameter 9,5 mm
female hexagon drive according to DIN 3126- D 6,3
male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
according to DIN 7427 Form D

show more show less

Details

4160-TX...
Screwdriver Bits 1/4"

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

Details

1385-L WS-10M PROLOG
Installation Tool plus Elecricians Tool Assortment

robust tool bag with moisture repellent bottom
solid metal handle with padded grip
removable cover and padded carrying strap
outside 5 compartments with hook and loop fastener, fixation for water level
inside 10 pockets and 8 hangers
made of tear-proofed durable nylon
Tool assortment WS-10M, 76-pcs.

show more show less

Details

565 PROLOG
Digital Multimeter

for measuring voltage, resistance, frequency, capacitance and temperature
for trade, industry, do-it-yourselfers as well as car, commercial vehicle and agricultural workshops
including measuring tips for clipping into the protective cover
including temperature probe from -20°C to 200°C
DC voltage: 0 - 600 V
AC voltage: 0 - 600 V
Direct current: 0 – 10 A
Alternating current: 0 - 10 A
Resistance: 0 - 60 MOhm
Diode test
During the continuity test, the integrated buzzer signals continuity below 50 Ohm
Frequency: 0 - 10 MHz
Duty cycle
Capacitance measurement: 0 - 60 MOhm
Automatic switch-off
Backlight
Data hold
True RMS
CAT III 600 V
including 2x AA batteries
easy operation thanks to clearly arranged control panel and large illuminated LCD display (all data quickly readable)
very short response times ensure rapid display of measurement results
optimal device alignment thanks to the stand on the housing
Protective cover protects multimeter against damage from being dropped

show more show less

Details

431, 432
Electronic Side Cutter

oval head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finished, polished head
ELORA-high grade tool steel C60 / 1.0601

Details

435-436
Electronic Side Cutter

pointed head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finish, polished head
ELORA-high grade tool steel C60 / 1.0601

Details

465-5 230BI
Fuel Line Plier

for operating the quick-release fasteners
for MERCEDES-BENZ, VW-AUDI, FIAT, OPEL, CITROËN, VOLVO, MAN SCANIA, CLAAS
AdBlue lines and AdBlue injection nozzle
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

4481-...
Tap Wrench

for taps
with sliding T-handle, with reversible ratchet function, chrome plated
special steel

Details

4490
Bag or Wire Twister

for fast and efficient closing of connecting tyre levers
with moulded plastic grip

Details

4510
Electronic Side Cutter ESD

for cutting in places difficult to access, for work with endangered electronic components
pointed, narrow head, small version with fine bevel, maximum stability under load of the cutting edges by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

4520-...
Electronic Side Cutter ESD

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finished, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

4530-...
Electronic Side Cutter ESD

for all work with electrostatic endangered components
oval head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

4540
Electronic Side Cutter with Wire Trapping Spring ESD

with trapping wire to cut off wire, for all work with electrostatic endangered components
oval head with wire trapping spring, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

4550-...
Electronic Side Cutter ESD

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

4560
Electronic Side Cutter ESD

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

4570
Electronic Oblique Tip Cutter ESD

for virtually flush cutting of thin, soft wires in places difficult to access, for work with electrostatic endangered components
extra narrow head, fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-Chrome-Vanadium 80CrV2 / 1.2235
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

458
Revolving Punch and Eyelet Plier

for pre-punching and pressing of eyelets 458S-4,5, 458S-5,0, 458S-5,5
bright nickel plated, with black ergonomically formed plastic handles
high-strength special tool steel

Details

4580-F E 2K
Electronic Oblique Cutter ESD

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

458S-...
Eyelets

for pressing with ELORA-No. 458
nickel plated
sheet metal

Details

4590
Electronic Oblique Cutter ESD

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
wide head, long cutting edges, with fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

1811-L PROLOG
Wheel Work Bench

sturdy double-walled sheet steel construction
scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
Storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
7 drawers with ball bearings a nd full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
central locking system with cylinder lock and 2 keys
anti-tilt device (prevents several drawers from opening at the same time)
load capacity per drawer: 45 kg
door side with one shelve
stable handle
2 fixed and 2 braked swivel castors
total load capacity 450 kg
suitable assortments: all OMS-Modules

show more show less

Details

460
Revolving Punch Plier with leverage

70% power saving by leverage
for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
bright nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

show more show less

Details

461
Revolving Punch Plier

for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

Details

462
Blind-Rivet Nut Plier

to process blind rivets
mandrel intake exchangeable on the head
for blind rivets diameters: 2.4, 3.2, 4.0 and 4.8 mm
black, plier body made of aluminium, leverage made of metal sheet
PVC handles

show more show less

Details

4620
Electronic Tungsten Carbide Side Cutter ESD

for cutting very hard materials with coincident maximum stability under load, for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load due to carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h