ELORA

Details

463
Glow Plug Plier

straight edition
for plugging on and pulling down of deep-seated glow plugs
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

4630
Electronic Tungsten Carbide Side Cutter ESD

for cutting very hard wires which are difficult to access, for all work with electrostatic endangered components
pointed, narrow head with groove and fine bevel, small version, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

464-200BI
Spark Plug Plier

hooked jaws
for difficult to pull down spark plug sockets
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

4640
Electronic Tungsten Carbide Oblique Cutter ESD

for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

465-...
Spark Plug Pliers

for difficult to access spark plug sockets
jaw length 50mm
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

4660-...
Electronic Snipe Nose Pliers ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
short, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH = smooth gripping surface
MH = serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

466A-...
Cable End Sleeve Pliers

for pressing of end-sleeves according to DIN 46228 part 1 and 4
with side cutter and wire stripping mechanism for soft wire
with black plastic handles
ELORA-high grade steel C45 / 1.0503

Details

466I-...
Cable End Sleeves

tin-plated pattern
deoxidized copper, (SF-Cu) according to DIN 1787
DIN 46228, part 1
sales unit 1000 pcs.

Details

466IH-...
Cable End Sleeves

tin-plated pattern
insulated by plastic collar
heat resistant up to 110 C°
copper (E-Cu) according to DIN 1787
DIN 46228, part 4
sales unit 500 pcs.

show more show less

Details

466S-...
Cable End Sleeves Assortments

in transparent plastic box
according to DIN 46228

Details

467-...
Crimping Pliers

for Western plugs
for cutting and stripping of flat, unshielded cables by one operation
high crimping quality due to integrated locking (self-releasing mechanism)
additional stripping function for round wires
hardened, gunmetal-finish, yellow plastic handles
ELORA-Chrome-Vanadium special purpose steel

show more show less

Details

4670
Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, short jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

OMS-16L
Module Engineer Screwdrivers

empty module for OMS-16
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

4680
Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

469
Circlip Plier for external retaining rings

for external retaining rings without holes
straight jaws, self-opening due to mounted double leaf spring
chrome-plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

Details

4690
Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, straight long jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

470-BI...
Snipe Nose Pliers with side cutter, straight pattern

serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

4700
Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
very fine, slim, long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

471-45 BI...
Snipe Nose Pliers with side cutter, bent

45° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

471-90 BI...
Snipe Nose Pliers with side cutter, bent

90° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
similar DIN ISO 5745

show more show less

Details

4710-...
Electronic Flat Nose Pliers ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
straight, short jaws, flat tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH= smooth gripping surface, without cut
MH= serrated gripping surface, with cut
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

4720
Electronic Round Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
short jaws, round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

473-J0-J4
Circlip Pliers for internal retaining ring

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

show more show less

Details

473-J01-J41
Circlip Pliers for internal retaining ring

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

show more show less

Details

4730
Elektronik Seitenschneider ESD

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

474-A0-A4
Circlip Plier for external retaining rings

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted double leaf spring
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

show more show less

Details

474-A01-A41
Circlip Plier for external retaining rings

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted double leaf spring
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

show more show less

Details

4740
Electronic Flat Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
straight, long jaws, flat tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

show more show less

Details

476BI-170
Flat Nose Pliers

for holding and bending
short jaws, serrated gripping surface
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

4760
Electronic Side Cutter ESD

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹
cutting edge hardness 61-63 HRC
ELORA -high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

Details

477-BI-...
Round Nose Pliers

with long jaws, serrated gripping surface
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

show more show less

Details

4770
Electronic Wire Stripping Plier ESD

for wire stripping of PVC, Teflon etc., for work with electrostatic endangered components
brass adjustment screw inside jaws, inlaid joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
ELORA-high grade tool steel C45 / 1.0503
ESD: DIN IEC 61340-5-1

Details

1450-1D PROLOG
Reversible Ratchet 1/4"

with small, slim head
gear wheel with safety locking and quick release button
smallest possible swivel angle 5°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

480-...
Brake Spring Pliers

for removing and replacing of brake shoe return springs in drum brakes
especially suitable for riveted brake linings
nickel-plated
Chrome-Vanadium 59CrV4 / 1.2242

Details

480-340
Brake Spring Plier

for removing and replacing of brake shoe return springs in drum brakes
with a moveable claw, especially suitable for glued brake linings
nickel-plated, with black coated handles
Chrome-Vanadium 59CrV4 / 1.2242

Details

483L / 483R
Shape Cutting Lever Tin Snips

for short, straight and figure cuts, small radius
with leverage
self-opening due to mounted leaf spring with lock
burr-free cut
adjustable, bolted joints
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground, 60-62 HRC
with plastic handles and trap protection
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1,2 mm with a tensile strength of 600 N/mm²
high grade tool steel, forged

show more show less

Details

484L / 484R
Ideal Lever Tin Snips

for short, straight and figure cuts, big radius
with leverage
self-opening due to mounted leaf spring, with lock
burr-free cut
adjustable, bolted joint
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground, 60-62 HRC
with plastic handles and trap protection
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1,2 mm with a tensile strength of 600 N/mm²
high grade tool steel, forged

show more show less

Details

485-BI
Heavy Duty End Cutter

maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
similar DIN ISO 5748

show more show less

Details

488-...
Punch Tin Snips

for short, straight and figure cuts, big radius
blades additionally inductive hardened and ground, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
made of high grade tool steel, forged

show more show less

Details

489-1
Seaming Plier, straight

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

Details

490-BI...
Heavy Duty Side Cutter

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

Details

492-BI...
Side Cutter

oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

Details

494 BI
Wire Stripper with restricted opening

self opening by spring
V-shaped jaws for stripping of plastic insulation from single and multi-wire conductors
adjustment of opening position to required diameter by adjustable screw with locknut
for wires from Ø 0,8 to 6,0 mm
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

494S-0,5 BI
Wire Stripper

self-adjusting blades in respect of diameter to be stripped
for stripping of single or multi-wire conductors
for wires from Ø 0,5 to 5,0 mm
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

495-BI...
Combination Pliers, German pattern

strong edition for tough conditions
lay on cutter box for better cutting
maximum stability under load by inductive hardening of the blades
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

Details

496
Wire Snip

for copper-, steel-, and aluminium wire
maximum wire cross section 16 mm²
polished head
black dip insulated handles
ELORA-Chrome-Vanadium special purpose steel

show more show less

Details

497R-300
Pelican Tin Snip

for long straight continuous cuts
blades additionally inductive hardened and ground, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

show more show less

Details

498-...
Universal Scissors

for cutting thin metal sheet, wire, plastics, adhesive weights, carpet, paper, etc.
self-opening, one-hand lock function
plastic handles
made of stainless steel

Details

498-7
Wire Snip

for wires up to 10 mm Ø
self-opening, one hand locking function
with red, impact resistant plastic handles
stainless steel

Details

499-...
Concreters

Mechanic's wipper for heaviest action
inductive hardened cutting blade, cutting edge hardness 61-63HRC
gunmetal-finish, ground head
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 9242 Form A

show more show less

Details

1215-WS OMS-6 PROLOG
Roller Tool Cabinet Super Caddy 100 plus Assortements

Roller Tool Cabinet Caddy 100 1215-L with 7 drawers solid metal sheet pattern, ELORA-yellow (RAL 1006) corrosion- and scratch-resistant powder-coating storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments solid handlebar, mounting possible on left sides central locking system with cylinder lock and 2 keys loading capacity of each drawer 45 kg 7 drawers with ball bearings and full-extension runners individual drawer locking over the whole ledge (one-hand operation) drawer internal measurements W 573 x D 410 mm drawers ELORA-black powder-coated (RAL 9005) total loading capacity 450 kg broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial) delivery without tools and accessories suitable assortments: WS and OMS combinable with tool chest ELORA-No. 1221-L
Tool Assortment WS OMS-6, 177-pcs
consisting of:
OMS-49 | OMS-51 | OMS-53 | OMS-47 | OMS-48

Details

OMS-49L
Empty Module

empty module for OMS-49
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 37,7 cm
hard foam insert

show more show less

Details

MS-8 PROLOG
Combination Spanner Set, stainless

in plastic box
to operate rustless bolted connections
long version, both ends fit same nut size
cranked
no galvanic surface treatment
ELORA-Stainless Steel X20CR13 / 1.4021
according to DIN 3113, Form B, ISO 3318, ISO 7738

show more show less

Details

810-L WS-4M PROLOG
Cantilever Tool Box plus Tool Assortment

windable, blue lacquered
to be locked with padlock ELORA-No. 256 ELORA-Nr. 256
heavy gauge sheet steel
Tool assortment WS-4M, 131-pcs.

show more show less

Details

770-LE1D
Reversible Ratchet 1/2"

for reversible ratchets: ELORA-No. 770-L1D, 770-L115U, 770-L1G, 770-L115G

Details

500-...
Grip Pliers with wire cutter, curved jaws

for round and flat material
with adjustment screw
quick release lever with return spring
forged, hardened and tempered half-round jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

500-S4
Grip Plier Set

4 pcs.
carton box packed

Details

5000N
Pneumatic Impact Wrench 1/2", 1850 Nm

extremely powerful and ultra light
max. torque 1850 Nm at just 2 kg weight
with vibration-damped composite housing
non-slip cold insulated handle
exhaust air guided through handle
always full capacity when loosening
clockwise- 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with high-performance twin-hammer clutch system
air inlet thread 1/4‘‘
operating pressure 6,3 bar
Maximum loosening 1850 Nm
max. sound level 85 dB (A) Lp A
average air consumption 161 l/min
recommended hose inner-Ø 8 mm
vibration acceleration 6,5 m/s²
including steel nipple

show more show less

Details

5002
Pneumatic Impact Wrench 1" with long spindle, 2450 Nm

extremely powerful with optimal working weight
max. torque 2450 Nm at just 7,2 kg weight
with vibration-damped composite housing
non-slip cold insulated handle
swivel air inlet thread and exhaust air guided through handle
always full capacity when loosening
clockwise- 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with super high-performance twin-hammer mechanism
air inlet thread 1/2‘‘
operating pressure 6,3 bar
Tightening torque max. 2450 Nm
Maximum loosening 3500 Nm
max. sound level 95 dB (A) Lp A
average air consumption 370 l/min
recommended hose inner-Ø 13 mm
vibration acceleration 52,2 m/s²
including brass nipple

show more show less

Details

5004
Pneumatic Impact Wrench Mini, 450 Nm

extremely handy impact wrench with only 160 mm length
for work at difficult accessible areas
maximum performance at minimum weight
with vibration-damped composite housing
non-slip cold insulated handle
exhaust air guided through handle
always full capacity when loosening
clockwise 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with high-performance twin-hammer mechanism
air inlet thread 1/4‘‘
Operating pressure 6,3 bar Tightening torque max. 450 Nm
max. sound level 95 dB (A) Lp A
average air consumption 100 l/min
recommended hose inner-Ø 8 mm
vibration acceleration 5,9 m/s²
including brass nipple

show more show less

Details

5005, 5006
Pneumatic Drills, reversible

robust housing
handy design
direction of rotation reversible
ELORA-No. 5005: drill chuck, clamping capacity up to Ø 13 mm
ELORA-No. 5006: keyless drill-chuck, clamping capacity up to Ø 10 mm
Non-slip cold insulated handle
exhaust air guided through handle
little vibration
air inlet thread 1/4''
operating pressure 6,3 bar
ELORA-No. 5005: max. free-running speed 750 rpm
ELORA-No. 5006: max. free running speed 1800 rpm
max. sound level 87 dB (A) Lp A
average air consumption 240 l/min
recommended hose inner- Ø 8 mm
including brass nipple

show more show less

Details

5008
Air Blow Gun

extremely light and resistant composite housing
scratchproofed on all sensitive areas
ideally insulated against cold compressed air
soundproofed by rubber coated soft-nozzle
efficient also at low pressure, double power compared with standard nozzles
non-slip rubber covered lever
large eyelet for simple storage and availibility
long lifetime due to stainless steel valve springs
air inlet thread 1/4''
including brass nipple

show more show less

Details

500G-250
Grip Plier, straight jaws

for flat material
with adjustment screw
quick release lever with return spring
forged, hardened and tempered straight jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

500H
Holder for ELORA-Grip Pliers

inserted into the holder ELORA grip pliers can be used as bench vise for simple works to screw on a work table or a work bench
fits to all 8'' and 10'' ELORA grip pliers and ELORA-No. 510-280, 510-280A, 511-280 and 524
black laquered

Details

500P-...
Prism Grip Pliers

for round and flat material
3-point support for any material profile
with adjustment screw
quick release lever with return spring
forged, hardened and tempered prism jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

501
Parallel-Grip Plier

for round and flat material
plier mouth with swivelling jaws
with adjustment screw
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

5010, 5012
Pneumatic Ratchet Wrench 90 Nm

extremely handy ratchet wrench with only 160 mm length
for effortless working at difficult accessible areas
maximum performance at minimum weight
very light composite housing
handy design
clockwise/counter-clockwise convertible at ratchet head
exhaust air guided through handle
non-slip cold insulated handle
little vibration only
air inlet thread 1/4‘‘
operating pressure 6,3 bar
Tightening torque max. 90 Nm
free-running speed 170 rpm
average air consumption 170 l/min
max. sound level 93 dB (A) Lp A
recommended hose inner-Ø 8 mm
including brass nipple

show more show less

Details

5011
Pneumatic Ratchet Wrench 1/4"

for effortless working at difficult accesible areas
very light composite housing
handy design
clockwise/counter-clockwise convertible at ratchet head
non-slip cold insulated handle
exhaust air guided through handle
little vibration only
air inlet thread 1/4‘‘
operating pressure 6,3 bar
Tightening torque max. 35 Nm
free-running speed 220 rpm
max. sound level 72 dB (A) Lp A
average air consumption 100 l/min
recommended hose inner-Ø 8 mm
including brass nipple

show more show less

Details

5014
Grinder straight Ø 6 mm

for grinding, polishing and deburring
robust and light housing
ergonomical designed for easy one-handed operation
low vibration
Speed infinitely adjustable with safety trigger
non-slip, cold- insulated handle
Collet Ø 6 mm
Air-inlet thread 1/4''
Operating pressure 6,3 bar
Max. free-running speed 25000 rpm.
Max. sound level 86 dB(A)Lp A
Average air consumption 270 l/min.
recommended hose inner- Ø 8 mm
including brass nipple

show more show less

Details

5015
Angle Grinder Ø 6 mm

for grinding, polishing and deburring
robust and light housing
ergonomically designed for easy one-handed operation
low vibration
Speed infinitely adjustable with safety trigger
Non-slip cold- insulated handle
Collet Ø 6 mm
Air-inlet thread 1/4''
Operating pressure 6,3 bar
Max. free-running speed 22000 rpm.
Max. sound level 72 dB(A)Lp A
Average air consumption 270 l/min.
recommended hose inner- Ø 8 mm
including brass nipple

show more show less

Details

5016
Angle Grinder Ø 125 mm

robust housing
lateral grip for left and right use
release with safety trigger
with spindle lock for disc change
for grinding discs with Ø 125 mm and 6 mm thickness (M14 x 1,5)
Air-inlet thread 1/4''
Operating pressure 6,3 bar
Max. free-running speed 11000 rpm.
Max. sound level 86 dB(A)Lp A
Average air consumption 490 l/min.
recommended hose inner- Ø 8 mm
including brass nipple

show more show less

Details

5017
Angle Grinder Ø 180 mm

robust housing
lateral grip for left and right use
release with safety trigger
with spindle lock for disc change
for grinding discs with Ø 180 mm and 6 mm thickness (M14 x 2)
Air-inlet thread 3/8''
Operating pressure 6,3 bar
Max. free-running speed 7000 rpm
Max. sound level 86 dB(A)Lp A
Average air consumption 500 l/min.
recommended hose inner- Ø 13 mm
including brass nipple

show more show less

Details

5018
Sabre Saw Set

for metal and body work
Suitable for small radii
robust housing and safety lever
with non-slip cold-insulated handle
exhaust air guided through handle
adjustable bow-wing skid
with 5 sawblades, mini-oiler and swivel connection to prevent kinking of the hose
Air-inlet thread 1/4''
Operating pressure 6,3 bar
Stroke length 10 mm
Cutting capacity 1,5 mm
Number of strokes 9500/min.
Max. sound level 83 dB(A)Lp A
Average air consumption 170 l/min.
recommended hose inner- Ø 8 mm
including brass nipple

show more show less

Details

5019
Needle Scaler

for efficient removal of rust or many other coatings
only suitable for solid metal parts, no steel sheets
2-piece housing for easy maintenance
non-slip cold insulated handle
19 (3 mm) needles
Air-inlet thread 1/4''
Operating pressure 6,3 bar
Number of strokes 3700/min.
Max. sound level 108 dB(A)Lp A
Average air consumption 120 l/min.
recommended hose inner- Ø 8 mm
including brass nipple

show more show less

Details

502-...
Ideal Grip Pliers

for round, profile and flat material
combined jaw shape
with adjustment screw and release lever
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

5020
Tire Inflator, gauged

gauged, with large manometer
one-hand-use ensures fast correction of tire pressure
ait inlet thread 1/4''
measuring range 0 - 10 bar, resp. 0-170 PSI
manometer Ø 75 mm
including brass nipple

show more show less

Details

5022-...
Spiral Hoses, Polyurethan

Polyurethan
Indestructible quality
with coupling and nipple
Inner- Ø 8 mm, Outer-Ø 10 mm
working pressure max. 15 bar (bursting limit at 55 bar)

show more show less

Details

5024-...
Compressed Air Signal Hoses

highly flexible hose in signal-green colour
signal-colour helps to avoid stumble accidents
ELORA No. 5024-10: pressed with safety coupling ELORA-No. 5025-9 and steel nipple ELORA-No. 5027-9
ELORA No. 5024-50: without safety coupling and steel nipple
temperature resistant from -40°C up to 65°C
abrasion-proof and highly flexible
working pressure max. 20 bar (bursting limit at 68 bar)
Inner- Ø 8 mm, Outer-Ø 10 mm

show more show less

Details

5025-..., 5026-...
Safety Couplings with Push-Button

high-quality, robust and durable quick release coupling in safety execution
one-hand operation
unlocking by 2 times pressing the push-button
first push for ventilation oft he coupling, but it remains locked
second push for releasing the coupling, thus preventing the ''whiplash effect''
safety version corresponding to ISO 4414/EN 983
housing made of aluminium, head and valve of hardened steel, zinc plated
inner parts made of stainless steel, thread made of brass, nickel plated
max. pressure 12 bar
air flow 1800 l/min

show more show less

Details

5027-..., 5028-...
Plug Nipple, Plug Nozzle Made of Steel

hardened and zinc plated
recommended for use with safety couplings
less wear and tear with maximum service life when compared with ordinary brass-nipples/nozzles

Details

504-S8
Mechanic Set

8 pcs.
assortment in convenient plastic case

Details

505-...
Parallel Grip Pliers

for exceedingly high work pieces
even for smaller round pieces
clamp function
parallel clamping surface with prism recess
equal parallelism over the complete clamping range
long slide (100-200 mm)
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

507-...
C-Clamp Grip Pliers

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
extension made of ST37-2

show more show less

Details

507-165/165S
C-Clamp Grip Pliers

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of C1045

show more show less

Details

507-280/280S
C-Clamp Grip Pliers

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

507A-...
Aluminium C-Clamp Grip Pliers

for clamping of profile material with high racks and for work on bulky work pieces
the light alloy avoids the adhering of welding beads
approx. 40% weight reduction for better handling in continuous operation
quick release lever with return spring
nickel-plated
jaws made of heavy-duty light metal alloy

show more show less

Details

508-...
Long Nose or Crow Nose Pliers

to clamp or remove round, profile and flat material in narrow and deep sections for e.g. motors, control cabinets etc.
long, slim jaws with burner hole
quick release lever with return spring
drop-forged, nickel-plated
jaws made of C1045

show more show less

Details

OMS-45L
Empty Module

empty module for OMS-45
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

show more show less

Details

510-280
Welder

for clamping of profiles and straps, especially appropriate to connect two working pieces of the same thickness
the large opening allows a good overview during welding
quick release lever with return spring
drop-forged, nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

510TG-280
Welder

for clamping of profiles and straps, especially appropriate to connect two working pieces of the same thickness
the large opening allows a good overview during welding
quick release lever with return spring
drop-forged, nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
annealed cast iron

show more show less

Details

511-280
Pipe Welders Grip Plier

for centered clamping of two close-fitting pipes
for welding, drilling, soldering etc.
the large opening allows a good overview
during welding
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

5110-ST
Electronic Positioning Tweezers

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

512-180
Sheet Metal Grip Plier

for clamping, bending and folding of thin and soft metal sheet
80 mm width, parallel joint jaws
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
drop-forged basis jaws
tin jaws made of C 1045, hardened

show more show less

Details

5120-ST
Electronic Positioning Tweezers

for all fine gripping and assembly work
for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, tips angled 90°, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

show more show less

Details

513
Axial Grip Plier

for clamping of overlapping metal sheets during spot welding, makes it possible to weld 4 clean spots without moving the plier, for use on doorways, side pieces, etc.
slim shape with quick release lever
jaw adjustment: 0-15 mm
jaw wideness: 57 mm
bright nickel-plated, black jaws
jaws made of high-strength steel

show more show less

Details

5140-ST, 5150-ST, 5360-ST
Universal Tweezers

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surface, serrated reaching surface
serrated grab surfaces, stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

516
Axial Grip Plier

for the rectangular clamping of two metal sheet pieces of the same thickness, for welding from fillet straight to the metal sheet edge
slim shape with quick release lever
jaw adjustment: 0-10 mm
jaw wideness: 50 mm
bright nickel-plated, black jaws
jaws made of high-strength steel

show more show less

Details

5160-ST, 5240-ST
Electronic Positioning Tweezer

for all fine gripping and assembly work
anti-glare satin finish, extremely fine, straight tips, grooved gripping and grab surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

5160-STE, 5240-STE
Electronic Tweezers ESD

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, extremely fine, straight tips, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

show more show less

Details

517
Axial Grip Plier

for clamping of U-profiles and U-shaped body profiles, especially appropriate for adjusting door sills, wheel housings, roofs and side panels for afterwards spot welding between the plier jaws
slim shape with quick release lever
jaw adjustment: 0-15 mm
jaw wideness: 45 mm
nickel-plated, black jaws
jaws made of high-strength steel

show more show less

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h