ELORA

Details

5170-ST, 5180-ST
Positioning Tweezers, oval

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

5170-STE, 5180-STE
Positioning Tweezers ESD, oval

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare black finish, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

show more show less

Details

518
Axial Grip Plier

for work in tight curves, especially appropriate for work on doorways, wheel housings, tail gates, bonnets and rear side panels, without moving the plier
slim shape with quick release lever
jaw adjustment: 0-18 mm
jaw wideness: 18 mm
bright nickel-plated, black jaws
jaws made of high-strength steel

show more show less

Details

519
Micro Grip Plier

high grade, hardened and tempered aluminium alloy, 120 g light only
ergonomic design with rounded shape
one-hand operation
axial movement of the moveable jaw
brass screw is also the moveable jaw
brass screw/ moveable jaw made of solid brass
knurled knob of the brass adjust screw
anodized body

show more show less

Details

520
Screwdriver Handle Variant

hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
chuck and bolster made from special tool steel WX 69

Details

5200-ST
Electronic IC-Tweezers

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, with IC-tip
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-Stainless steel

Details

5210-ST
Electronic Positioning Tweezers

for all fine gripping and assembly work
anti-glare satin finish, inside vertical concave, until Ø 2mm, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

5210-STE
Positioning Tweezers ESD

for all fine gripping and assembly work
anti-glare black finish, inside vertical concave, until Ø 2mm, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

show more show less

Details

5220-ST, 5290-ST
Electronic Gripping Tweezers

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

Details

524-...
Chain Grip Plier

for clamping of any shaped profile, especially appropriate in narrow and difficult to reach areas like oil filters, exhaust pipes, etc.
ELORA-No. 524E is an extension as well as spare chain at the same time
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

525-...
Wire Twisting Pliers

for wire locking of metal fasteners
serrated gripping for positive grip and side cutter
for clockwise use and with automatic return
jaws angled by 40°, for wires to Ø1,6mm
gunmetal finish, head polished
Chrome-Vanadium special steel

show more show less

Details

5250
Electronic Tweezers

for all fine gripping and assembly work
anti-glare satin finish, rectangular, smooth gripping and grab surfaces, 2 mm width
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

5280-STE
Electronic Tweezers ESD

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

show more show less

Details

527 S4
Screwdriver Set Variant

4 pcs.
for inside TORX®screws
in black plastic wallet
hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
with suspension hole
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

527-TX...
Screwdriver Blades Variant

for inside TORX®screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

5310-ST
Universal Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

Details

5003N
Pneumatic Impact Wrench Mini, 1080 Nm

extremely handy impact wrench with only 108 mm length
for work at difficult accessible areas
maximum performance at minimum weight
with vibration-damped composite housing
non-slip cold insulated handle
exhaust air guided through handle
always full capacity when loosening
clockwise 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with high-performance twin-hammer clutch system
air inlet thread 1/4‘‘
Operating pressure 6,3 bar max. sound level 85 dB (A) Lp A
average air consumption 118 l/min
recommended hose inner-Ø 8 mm
vibration acceleration 4,3 m/s²
including steel nipple
maximum loosening 1080 Nm

show more show less

Details

5330-ST
Electronic Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

5330-STE
Electronic Tweezers ESD

for all fine gripping and assembly work
satin antiglare black finish, smooth gripping surfaces, surface resistance 10⁶ - 10⁹ Ohm, antimagnetic, acid-proof, stainless
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

Details

535-IS 4
Screwdriver Blade Variant

for plain slotted screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
blade edge according to DIN ISO 2380-1

show more show less

Details

5350-ST
Electronic Tweezer

for all fine gripping and assembly work
anti-glare satin finish, smooth gripping surfaces, flat, extreme fine, long tips
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

Details

5350-STE
Electronic Tweezer ESD

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, flat, extremely long, fine tips, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

show more show less

Details

5370-ST
Electronic SMD Reverse Action Tweezers

for handling of SMD´s on PCB´s, SOT packages and monolithic chips
anti-glare satin finish, smooth gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-Stainless steel

Details

539-IS
Screwdriver

for plain slotted screws
matt chrome plated forged blade with forged hexagon section
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

Details

539/1-IS...
Screwdriver

for plain slotted screws
matt chrome plated hexagon blade with forged hexagon section
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Special steel 73MoV5 / 1.2381
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

Details

543-IS...
Screwdriver, short version

for plain slotted screws
matt chrome plated blade
through hardened
blade edge gunmetal finished
plastic handle
with suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2A, blade edge according to DIN ISO 2380-1

show more show less

Details

545-IS...
Screwdriver

for plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

Details

545-ST IS...
Screwdriver, stainless

for plain slotted screws
forged blade
through hardened
no galvanic surface treatment
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Stainless Steel X46Cr13 / 1.4034
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

Details

547-PH...
Screwdriver

for cross slotted screws
matt chrome plated forged blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
PH0 = blade made of ELORA-Special steel 73MoV52 / 1.2381
PH1-4 = blade made of ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

Details

547-ST PH...
Screwdriver, stainless

for cross slotted screws
forged blade
through hardened
no galvanic surface treatment
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Stainless Steel X46Cr13 / 1.4034
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

Details

549-PZ...
Screwdriver

for cross slotted screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
PZ0 = blade made of ELORA-Special steel 73MoV52 / 1.2381
PZ1-3 = blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
PZ4 = blade made of ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, Spitze nach DIN ISO 8764-1 PZ

show more show less

Details

551-PH...
Screwdriver Blades Variant

for plain and cross slotted screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
blade edge according to DIN ISO 2380-1
tip according to DIN ISO 8764-1 PH

show more show less

Details

552-PZ...
Screwdriver Blades Variant

for plain and cross slotted screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
blade edge according to DIN ISO 2380-1
tip according to DIN ISO 8764-1 PZ

show more show less

Details

554-PZ...
Screwdriver, short version

for cross slotted screws
matt chrome plated blade
through hardened
tip gunmetal finished
plastic handle
with suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PZ

show more show less

Details

555-PH...
Screwdriver, short version

for cross slotted screws
matt chrome plated blade
through hardened
tip gunmetal finished
plastic handle
with suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

Details

559-PH...
Screwdriver

for cross slotted screws
matt chrome plated forged blade with forged hexagon section
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

Details

559/1-PH...
Screwdriver

for cross slotted screws
matt chrome plated hexagon blade with forged hexagon section
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Special steel 73MoV5 / 1.2381
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

Details

561
Voltage Tester

for 120-230V AC
contact sensor in plastic head for activating test function
transparent plastic handle with lens and red plastic head
nickel-plated blade and plastic sheathed

Details

563
Voltage Tester

for 120-230V AC
contact sensor in brass head for activating test function
transparent plastic handle with lens and brass head
nickel-plated blade and plastic sheathed

Details

564N
VDE-Voltage Tester, two-pole

to detect AC voltage between 6V-1000V and DC voltage between 6V-1400V
optical, audible and vibration alert if life-threatening voltage occurs starting from 35V
polarity phase indication at DC
automatic selection of measurement range, 1 pole single phase detection, two-pole 3 phase control
continuity test 0-200 kOhm (optical and audible)
Diode test
FI/RCD-control test (30mA) via two feelers
white LED metering monitor light
easily operated click system to adjust the power socket size
optimum one-hand operation
special tips also fit to WAGO-clamps
unscrewable 4 mm test tip adapter and GS 38 test attachments
non-volatile test tip covers
black rubber grips
dust- and water-jet-proof
CAT IV 1000V according to IEC/EN 61243-3:2014-02 (DIN VDE 0682-401)
WAGO= reg. Trademark of company WAGO Kontakttechnik GmbH & Co. KG, Minden / Germany

show more show less

Details

566-...
VDE Voltage Tester

for 100-250V AC
contact sensor for activating test function
with plastic clip and pin hole
zincked blade
according to DIN VDE 0680 Teil 6 1977-02

show more show less

Details

569-PZ...
Screwdriver

for cross slotted screws
matt chrome plated forged blade with forged hexagon section
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PZ

show more show less

Details

573TX-...
Screwdriver with Ball End

for inside TORX® screws
matt chrome plated blade
through hardened
tip gunmetal finished
maximum swivel angle 20°
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrom-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

575-...
Screwdriver with Ball End

for inside hexagon screws
matt chrome plated blade
through hardened
tip gunmetal finished
maximum swivel angle 20°
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2936

show more show less

Details

577-...
Screwdriver Blades Variant

for inside hexagon screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
according to DIN ISO 2936

show more show less

Details

579 S5-K, 581 S5-K
Screwdriver Sets

5 pcs.
carton box packed
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

580-45
Spark Plug Tester

for function testing of spark plugs with one electrode
plastic handle with metal clip
blade made of Chrome-Vanadium 31CrV3 / 1.2208

Details

582 S5-K...
Screwdriver Set

5 pcs.
carton box packed
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

583 S5-K
Screwdriver Sets

5 pcs.
in black plastic packaging with transparent cover
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

583 S6K-ST
Screwdriver Set

6 pcs.
carton box packed
forged blade
through hardened
no galvanic surface treatment
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

583 S6K...
Screwdriver Sets

6 pcs.
carton box packed
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

583 S7-K...
Screwdriver Sets

7 pcs.
carton box packed
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

586
Automotive Light Tester

10 mm long probe tip
with protection cap
cable with alligator clamp
for voltage testing from 6-24 V
not for use on vehicles with electrical components
in a plastic bag

show more show less

Details

5340-STE
Electronic Tweezers ESD

for all fine gripping and assembly work
satin antiglare black finish, smooth gripping surfaces, surface resistance 10⁶ - 10⁹ Ohm, antimagnetic, acid-proof, stainless
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

Details

590-S
Mini Hook Set

4 pcs.
for removing and inserting of O-rings and sealing gaskets
QUATROLIT®-2C-handles with suspension hole
blade matt chrome-plated
Chrome-Vanadium 58CrV4 / 1.8161

show more show less

Details

OMS-26L
Empty Module

empty module for OMS-26
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

1215-L PROLOG
Roller Tool Cabinet CADDY 100

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
solid handlebar, mounting possible on left sides
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 45 kg
7 drawers with ball bearings and full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS
combinable with tool chest ELORA-No. 1221-L
other drawer types and special colours on request

show more show less

Details

OMS-3L/4L
Empty Module

empty module for OMS-3 and 4
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

165-400 PROLOG
Tyre Lever

especially suitable for car tyres
drop forged pattern with profile shaft
matt chrome-plated
Chrome-Vanadium 31 CrV3 / 1.2208

Details

486
Adjusting Plier

for gripping small components and wires and for bending contacts and relay springs
with slightly serrated gripping surfaces, ground heads
with dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

Details

60-...A
Adjustable Wrench

for bolts and nuts with square or hexagon pattern
with precise and well readable preset-scale in mm graduation
60-24A without scale
Swedish Pattern
left-handed roll
jaw set at 15°
phosphated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to ISO 6787

show more show less

Details

60-...MB
Adjustable Wrench

with precise and well readable preset-scale in mm graduation
right-handed roll
jaw set at 15°
polished head, chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to ISO 6787

show more show less

Details

600-IS...
Electronic Screwdriver

for plain slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

Details

600-IS...ESD
Electronic Screwdriver ESD

for plain slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

600-S15
ESD Set

15 pcs.
in black plastic box with 2-colour foam material
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

Details

243MB-1 PROLOG
Balance Weight Plier

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
with plastic head on the hammer side, especially for painted weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

OMS-31L
Empty Module

empty module for OMS-31
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

61-MB S3
Adjustable Wrench Set

carton box packed
with precise and well readable preset-scale in mm graduation
head ground, chrome-plated, Swedish Pattern, left-handed roll
jaw set at 15°
Chrome-Vanadium 31 CrV 3 / 1.2208
according to ISO 6787

show more show less

Details

61-MB...
Adjustable Wrench

with precise and well readable preset-scale in mm graduation
head ground, chrome-plated, Swedish pattern, left-handed roll
jaw set at 15°
Chrome-Vanadium 31 CrV 3 / 1.2208
according to ISO 6787

show more show less

Details

610-PH...
Electronic Screwdriver

for cross slotted screws
dull chrome plated blade with grey tip, 2-C handle with revolving end-cap, non-slip resistant micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 75MoV5 / 1.2381

Details

610-PH...ESD
Electronic Screwdriver ESD

for cross slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

612-PZ...
Electronic Screwdriver

for cross slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

Details

616-S6
Electronic Screwdriver Set

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

show more show less

Details

617-S6
Electronic Screwdriver Set

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

show more show less

Details

618-S6
Electronic Screwdriver Set

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

1382-L2 PROLOG
Plastic Tool Case

organisers for small parts integrated in the lid
internal tray with handle, complete with bit holder and measuring scale (cm/inch)
solid single hand handle
Polypropylene

Details

JUBI 770-OKLMU Spezial
Socket Set 1/2" in black metal storage case with OMS hard foam insert

25 pcs.
in black metal storage case with OMS hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315
model with hexagon sockets on request

show more show less

Details

62-BI...
Adjustable Wrench

premium industrial quality
25% wider jaw capacity
thinner and longer jaws
with precise and easy readable preset-scale
millimeter graduation
right-handed roll
jaw set at 15°
ergonomic and slip-resistant plastic handle
polished head, chrome-plated
ELORA-Chrome-Vanadium 31CrV 3/ 1.2208
according to ISO 6787

show more show less

Details

620-TTX...ESD
Electronic Screwdriver ESD

suitable for smallest inside TORX®screws with locking pin, for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

show more show less