ELORA

870-M...
Socket 3/8", metric

Details

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

870-T...
Socket 3/8"

Details

especially suitable for deep-set female screws on long threaded bolts
hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

870-TXE...
Socket 3/8"

Details

for outside TORX®screws
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

870-TXU/TTXU
Socket Sets 3/8"

Details

12 pcs.
suitable for inside TORX®screws resp. inside TORX®safety screws
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174, with ball retaining groove
operation tools according to DIN 3122, ISO 3315
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

870-V...
Extension Bar 3/8", swivelling

Details

matt chrome-plated, head polished
with special square for a swivle angle of 8° to each side
especially suitable for screw connections within confined spaces
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball retaining groove resp. with ball locking device
according to DIN 3123, ISO 3316

870-W...
Socket 3/8", whitworth

Details

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

871-A...
Socket 3/8", inch

Details

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

871-M...
Socket 3/8", metric

Details

hot forged
chrome-plated, polished
knurled
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
according to DIN 3124, ISO 2725-1

871TMG-...
Spark Plug Socket 3/8"

Details

extra deep, with permanent magnet
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 10, ISO 1174, with ball
retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

871TZ-...
Spark Plug Sockets 3/8"

Details

extra deep, with rubber insert
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 10, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

874-2
Oil Filter Wrench

Details

suitable for oil filters in difficult to access areas
3 arms, for clockwise and counter-clockwise tightening
female square drive according to DIN 3120-C 10, ISO 1174
with adapter to female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
external hexagon 21 mm
chrome-plated, adapter gunmetal-finish
high grade tool steel

1210-L7R
Roller Tool Cabinet Buddy

Details

7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS

show more show less

875
Truck Air Filter Wrench

Details

for loosening of air filters
3 arms
black coated
high grade tool steel
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove

877-TXE
Socket Set 3/8"

Details

13 pcs.
suitable for outside TORX®screws
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174, with ball retaining groove
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

87A-...
Open End Slogging Spanner, inch

Details

heavy, drop-forged type
sand-blasted
further sizes on request
up to 110 mm and all AF-Sizes: Chrome-Vanadium 31 CrV 3 / 1.2208
from 115 mm: ELORA-Tempering steel C35 / 1.0501
according to DIN 133

87M-...
Open End Slogging Spanner, metric

Details

heavy, drop-forged type
sand-blasted
further sizes on request
Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 133

88-...
Single End Ring Spanner

Details

straight pattern
with suspension eye
sand-blasted
further sizes on request
ELORA-Tempering steel C35 / 1.0501
according to DIN 3111

887
Safety Goggles 3 in 1

Details

in neoprene pouch with 2 inside pockets for extra lenses
frame made of black nylon and anti-slip rubber nose bridges
adjustable bridge
with 3 interchangeable plastic lenses (clear, smoke-colored and yellow)
according to EN166 and CE standard

583 S6K-2
Screwdriver Sets

Details

6 pcs.
carton box packed
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

890-...
Hook Wrench with Nose

Details

for grooved nuts according to DIN 1804, antifriction bearing bolt, according to DIN 981
gunmetal finished
rounded edges for better handling
high grade tool steel
according to DIN 1810, Form A

890-V...
Adjustable Hook Wrenches with Nose

Details

for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
special steel, hardened
gunmetal finished
high grade tool steel

890-VG...
Hinged Hook Wrench with Nose

Details

Short design, fits in every pocket and toolbox
for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
high grade tool steel, hardened
gunmetal finished

891-...
Hook Wrench with Pin

Details

for nuts with radial holes according to DIN 1816 and DIN 548
rounded edges for better handling
gunmetal finished
high grade tool steel
according to DIN 1810, Form B

892-...
Adjustable Pin Wrench

Details

for nuts with two holes according to DIN 547, spring flange and flange nuts according to DIN 44716
gunmetal finished
high grade tool steel
according to DIN 3116

894-...
Single Open-Ended Spanner

Details

jaw set at 15°, gunmetal finished
high grade tool steel
according to DIN 894 / ISO 3318

895-...
Double Open-Ended Spanner

Details

jaw set at 15°, gunmetal finished
high grade tool steel
according to DIN 895 / ISO 3318 / ISO 1085

5340-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

OMS-8L
Empty Module

Details

empty module for OMS-8
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

900IS-...
VDE Screwdriver

Details

for plain slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
up to ELORA-No. 900IS-100 ELORA-Chrome-Vanadium 73MoV52 / 1.2381 else ELORA-Chrome-Vanadium 59CrV4 / 1.2242
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
blade according to DIN ISO 2380-1

904-S10
VDE Set

Details

10 pcs.
in red plastic box with 2-colour plastic inlay
VDE insulated up to 1.000V, according to EN 60900/IEC 60900

904-S3
VDE Plier Set

Details

3 pcs.
carton box packed
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900

1382-L2
Plastic Tool Case

Details

organisers for small parts integrated in the lid
internal tray with handle, complete with bit holder and measuring scale (cm/inch)
solid single hand handle
Polypropylene

905-...
VDE Screwdriver

Details

for external hexagon screws
gunmetal-finish blade
impact resistant QUATROLIT-2C-handle with pin hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
VDE insulation up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
according to DIN 7445, ISO2725-1

910PH-...
VDE Screwdriver

Details

for cross slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
up to ELORA-No. 910PH-0 ELORA-Chrome-Vanadium 73MoV52 / 1.2381, otherwise ELORA-Chrome-Vanadium 59CrV4 / 1.2242
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
tip according to DIN ISO 8764-1 PH

912PZ-...
VDE Screwdriver

Details

for cross slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
ELORA-Chrome-Vanadium 73MoV52 / 1.2381
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
tip according to DIN ISO 8764-1 PZ

271KS
Parallel Pin Punch Set

Details

6 pcs.
in plastic holder
completely inductive hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

show more show less

920-165
VDE Flat Nose Plier with Handle Insulation

Details

for holding and bending
short jaws, serrated gripping surface
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

930-...
VDE Snipe Nose Pliers with Handle Insulation

Details

serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

935-45...
VDE Snipe Nose Pliers with Handle Insulation

Details

45° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

935-90 205
VDE Snipe Nose Plier with Handle Insulation

Details

90° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier similar to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

940-165
VDE Round Nose Plier with Handle Insulation

Details

with short jaws, serrated gripping surface
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

JUBI 100-S8
Double Open Ended Spanner Set in a black anniversary roll-up bag

Details

8 pcs.
stored in a black anniversary roll-up bag
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

949 H
Pliers Holder

Details

for presentation of pliers on perforated display walls
empty, without pliers

950-...
VDE Universal Side Cutter with handle insulation

Details

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

955-...
VDE Heavy Duty Side Cutter with Handle Insulation

Details

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C60 / 1.0601

956-L...
Hexagon Key with T-Handle

Details

for inside hexagon screws
gunmetal finished
ELORA-Chrome-Vanadium steel
DIN ISO 2936
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

959-L...
Hexagon Key

Details

for inside hexagon screws
nickel-plated
ELORA-Chrome-Vanadium steel
DIN ISO 2936
2-color-multilayer insulation (yellow, red) for easy identification of insulation damages
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

960-...
VDE Combination Pliers with Handle Insulation

Details

German pattern
strong edition for tough conditions
lay on cutter box for better cutting
maximum stability of the blades under load by inductive hardening
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600 N/mm²)
serrated gripping surface and burner hole
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5746
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

961-...
Adjustable Wrench

Details

jaw set at 15°
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
chrome plated
handle insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

966
Reversible Ratchet 3/8"

Details

gear-wheel with safety locking mechanism and quick release button
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120-A 10 ISO1174, with ball locking device

967-...
Extension Bars 3/8"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

968
T-Handle 3/8"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

969-...
Sockets 3/8"

Details

square drive according to DIN 3120-C 10 ISO1174, with ball retaining groove
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

970-160
VDE Wire Stripper with Handle Insulation

Details

self-opening by spring
V-shaped jaws for stripping of plastic insulation from single and multi-wire conductors
adjustment of opening position to required diameter by adjustable screw with locknut
for wires from Ø 0,8 - 6,0 mm
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

971-...
VDE Sockets 1/2"

Details

female square according to DIN 3120-C 12,5, ISO1174, with ball retaining groove
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN60900/IEC 60900
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

971-IN...
VDE Screwdriver Sockets 1/2"

Details

only to use with ELORA-No. 972, 973 and 974-125
chrome-plated
female square according to DIN 3120-C 12,5, ISO1174, with ball retaining groove
VDE insulated up to 1.000V, according to EN60900/IEC 60900
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

971-S13
VDE Socket Set 1/2"

Details

13 pcs.
in red plastic box with 2-colour-plastic inlay
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

972
VDE Reversible Ratchet 1/2"

Details

gear-wheel with safety locking mechanism and quick release button
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN60900/IEC 60900
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device

973
VDE-T-Bar 1/2"

Details

with safety screw lock
chrome plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN60900/IEC 60900
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

974-...
Extension Bars 1/2"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

5300-ST
Electronic Gripping Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

977
VDE Cable Knife

Details

with straight blade, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

977A
VDE Cable Knife

Details

blade with blunt end to protect inner conductors, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

977H
VDE Cable Knife

Details

with hook blade, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

979S-5K
VDE Screwdriver Set

Details

5 pcs.
in an environmentally friendly carton package

980-165
VDE Wire Stripper with Handle Insulation

Details

self-adjusting blades in respect of diameter to be stripped
for wires from 0,5-5,0 mm
for stripping of single or multi-wire conductors
chrome-plated, polished, with QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

WS OMS-5
Industrial

Details

suitable for all Roller Tool Cabinets and Work Bench 1811-L

985
VDE Cable Snip with Dipped Insulation

Details

maximum stability under load of the blades by inductive hardening
cutting edge hardness: 65 HRC
for copper and aluminium wire
gunmetal-finish
2-colour-multilayer safety handles isolation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
ELORA-high grade tool steel C60 / 1.0601

986-...
VDE-Ring Ratchet Spanner

Details

2-colour-multilayer isolation (yellow, red) for easy identification
of insulation damages
smallest possible swivel angle 5 °
tested according to EN/IEC 60900
individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

987-...
VDE Single Open-Ended Spanner

Details

jaw set at 15°
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, according to EN 60900/IEC 60900
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

988-...
VDE Single End Ring Spanner, deep cranked

Details

2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, according to EN 60900/IEC 60900:2004
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

989-...
Metal Saw

Details

for pinned saw blades 150 mm
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000 V
989-E = Spare blade

990
Torque Wrench 1/2"

Details

with noticeable and audible "click" mechanism
manually adjustable, double scale unit with Nm and ft.lb.
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
accuracy +-4% of set value
square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

OMS-47L
Empty Module

Details

empty module for OMS-47
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-12L
Module-Hand striking Tools

Details

empty module for OMS-12
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

770-LE1ZI
Repair Kit 1/2"

Details

for push through ratchet: ELORA-No. 770-L1Zl

OMS-32L
Empty Module

Details

empty module for OMS-32
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-19L
Module-Double-Ended Ring Spanner

Details

empty module for OMS-19
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

266KS
Chisel and Punch Set

Details

6 pcs.
in plastic holder
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

1215-L
Roller Tool Cabinet CADDY 100

Details

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
solid handlebar, mounting possible on left sides
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 45 kg
7 drawers with ball bearings and full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS
combinable with tool chest ELORA-No. 1221-L
other drawer types and special colours on request

show more show less

466SH-...
Cable End Sleeves Assortments, insulated

Details

in transparent plastic box
according to DIN 46228

1220-WS OMS-5
Roller Tool Cabinet Super Caddy plus Assortements

Details

Roller Tool Cabinet Super Caddy 1220-L7
with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 7 storage compartments for small parts and rim on all sides
200 kg shelf load capacity due to strengthened top cover
solid handlebar, mounting possible on both sides
sides and back panel with Euro-Perforation 10 x 38 mm (hole square 10 x 10 mm, hole centre-hole centre 38 x38 mm) for mounting accessory hooks, rays, waste basket, can holder, paper roll holder, cable drum
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 40 kg
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
can be individually divided with separators or equipped with ELORA-OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
dividers for drawers separately available
Tool Assortment WS OMS-5, 217-pcs
consisting of:
OMS-46 | OMS-48 | OMS-50 | OMS-53 | OMS-45

show more show less

1450-E1UN
Repair Kit 1/4"

Details

for reversible ratchet 1450-1UN

463-1
Glow Plug Plier

Details

pliers profile specially adapted to the plugs
angled design for use even with glow plug connectors that are difficult to access
recess prevents damage to the cable
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

1811-L
Wheel Work Bench

Details

sturdy double-walled sheet steel construction
scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
Storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
7 drawers with ball bearings a nd full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
central locking system with cylinder lock and 2 keys
anti-tilt device (prevents several drawers from opening at the same time)
load capacity per drawer: 45 kg
door side with one shelve
stable handle
2 fixed and 2 braked swivel castors
total load capacity 450 kg
suitable assortments: all OMS-Modules

show more show less

266S
Chisel and Punch Set

Details

6 pcs.
in wooden holder
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

OMS-52L
Empty Module

Details

empty module for OMS-52
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

135
Waterpump Plier with dipped insulation

Details

adjustable in 7 positions
self-locking due to gripping surfaces staggered in reverse order for gripping pipes and nuts
box joint with clamping protection
matt chrome-plated
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000 V
according to DIN ISO 8976
ELORA Chrome-Vanadium 31 CrV3 /1.2208

JUBI 600-S6
Wood Screwdriver Set in a black anniversary roll-up bag

Details

6 pcs.
stored in a black anniversary roll-up bag
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

404-S41
Circlip Plier Set

Details

4 pcs.
carton box packed
chequered handles
chrome-plated, polished joint

770-INMTIN
Socket Sets 1/2"

Details

9 pcs. titan-coated
for inside hexagon screws
in black metal storage case with plastic insert
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422

show more show less

OMS-43L
Empty Module

Details

empty module for OMS-43
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

1571-...
Engineer Steel Square with stop

Details

90° plain blade
with exposed try square
zinc coated
steel

OMS-35L/25L
empty Module

Details

empty module for OMS-35 and 25
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 37,7 cm
hard foam insert

JUBI 500-S6
Screwdriver Set in a black anniversary roll-up bag

Details

6 pcs.
stored in a black anniversary roll-up bag
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

5190-STE
Positioning Tweezer ESD,oblique, half round

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare black finish, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

565
Digital Multimeter

Details

for measuring voltage, resistance, frequency, capacitance and temperature
for trade, industry, do-it-yourselfers as well as car, commercial vehicle and agricultural workshops
including measuring tips for clipping into the protective cover
including temperature probe from -20°C to 200°C
DC voltage: 0 - 600 V
AC voltage: 0 - 600 V
Direct current: 0 – 10 A
Alternating current: 0 - 10 A
Resistance: 0 - 60 MOhm
Diode test
During the continuity test, the integrated buzzer signals continuity below 50 Ohm
Frequency: 0 - 10 MHz
Duty cycle
Capacitance measurement: 0 - 60 MOhm
Automatic switch-off
Backlight
Data hold
True RMS
CAT III 600 V
including 2x AA batteries
easy operation thanks to clearly arranged control panel and large illuminated LCD display (all data quickly readable)
very short response times ensure rapid display of measurement results
optimal device alignment thanks to the stand on the housing
Protective cover protects multimeter against damage from being dropped

show more show less

100-KH 9
Double Open Ended Spanner Set

Details

in black plastic holder
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

1210-L7B
Roller Tool Cabinet Buddy

Details

7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS

show more show less

870-E1D
Reversible Ratchet 3/8"

Details

for Reversible Ratchet 870-1D

Brand

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h