ELORA

Details

5300-ST
Electronic Gripping Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

Details

977
VDE Cable Knife

with straight blade, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

Details

977A
VDE Cable Knife

blade with blunt end to protect inner conductors, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

Details

977H
VDE Cable Knife

with hook blade, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

Details

979S-5K
VDE Screwdriver Set

5 pcs.
in an environmentally friendly carton package

Details

980-165
VDE Wire Stripper with Handle Insulation

self-adjusting blades in respect of diameter to be stripped
for wires from 0,5-5,0 mm
for stripping of single or multi-wire conductors
chrome-plated, polished, with QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

985
VDE Cable Snip with Dipped Insulation

maximum stability under load of the blades by inductive hardening
cutting edge hardness: 65 HRC
for copper and aluminium wire
gunmetal-finish
2-colour-multilayer safety handles isolation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
ELORA-high grade tool steel C60 / 1.0601

show more show less

Details

986-...
VDE-Ring Ratchet Spanner

2-colour-multilayer isolation (yellow, red) for easy identification
of insulation damages
smallest possible swivel angle 5 °
tested according to EN/IEC 60900
individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

987-...
VDE Single Open-Ended Spanner

jaw set at 15°
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, according to EN 60900/IEC 60900
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

988-...
VDE Single End Ring Spanner, deep cranked

2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, according to EN 60900/IEC 60900:2004
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

Details

989-...
Metal Saw

for pinned saw blades 150 mm
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000 V
989-E = Spare blade

Details

990
Torque Wrench 1/2"

with noticeable and audible "click" mechanism
manually adjustable, double scale unit with Nm and ft.lb.
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
accuracy +-4% of set value
square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

show more show less

Details

OMS-47L
Empty Module

empty module for OMS-47
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

show more show less

Details

OMS-12L
Module-Hand striking Tools

empty module for OMS-12
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

770-LE1ZI
Repair Kit 1/2"

for push through ratchet: ELORA-No. 770-L1Zl

Details

465-230BI PROLOG
Spark Plug Pliers

for difficult to access spark plug sockets
jaw length 50mm
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

OMS-32L
Empty Module

empty module for OMS-32
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

790-LTPS3 PROLOG
Impact Socket Set 1/2"

3 pcs., in plastic box
extra deep, plastic sleeve, in plastic box
for wheel mounting, plastic sleeve to protect the rims from scratches
for power tools
coloured size identification
female square drive according to DIN 3121-H 12,5, ISO 1174
special steel

show more show less

Details

OMS-19L
Module-Double-Ended Ring Spanner

empty module for OMS-19
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

1210-L7 WS OMS-6 PROLOG
Roller Tool Cabinet Buddy plus Assortements

Roller Tool Cabinet Buddy 1210-L7
7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
Tool Assortment WS OMS-6, 177-pcs
consisting of:
OMS-49 | OMS-51 | OMS-53 | OMS-47 | OMS-48

show more show less

Details

266KS
Chisel and Punch Set

6 pcs.
in plastic holder
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

show more show less

Details

5001N PROLOG
Pneumatic Impact Wrench 3/4", 2340 Nm

extremely powerful and ultra light
max. torque 2340 Nm at just 3,5 kg weight
with vibration-damped composite housing
non-slip cold insulated handle
exhaust air guided through handle
always full capacity when loosening
clockwise- 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with high-performance twin-hammer clutch system
air inlet thread 3/8‘‘
operating pressure 6,3 bar
Maximum loosening 2340 Nm
max. sound level 85 dB (A) Lp A
average air consumption 221 l/min
recommended hose inner-Ø 13 mm
vibration acceleration 7,7 m/s²
including steel nipple

show more show less

Details

1215-L
Roller Tool Cabinet CADDY 100

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
solid handlebar, mounting possible on left sides
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 45 kg
7 drawers with ball bearings and full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS
combinable with tool chest ELORA-No. 1221-L
other drawer types and special colours on request

show more show less

Details

466SH-...
Cable End Sleeves Assortments, insulated

in transparent plastic box
according to DIN 46228

Details

JUBI 403-S8 PROLOG
Circlip Plier Set in a black anniversary nylon bag with zip fastener

8 pcs.
stored in a black anniversary nylon bag with zip fastener
chrome-plated, polished joint

Details

870-JSU PROLOG
Socket Set 3/8"

20 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174, with ball retaining groove
operation tools according to DIN 3122, ISO 3315

Details

WS-4M PROLOG
Tool Assortment

suitable for tool cabinet ELORA-No. 1100L
suitable for all Roller Tool Cabinets and Work Bench 1811-L
suitable for cantilever tool box ELORA-Nr. 810-L
suitable for hard protective case ELORA-No. 1380-L and hard protective trolley case ELORA-No. 1381-L

Details

1450-E1UN
Repair Kit 1/4"

for reversible ratchet 1450-1UN

Details

463-1
Glow Plug Plier

pliers profile specially adapted to the plugs
angled design for use even with glow plug connectors that are difficult to access
recess prevents damage to the cable
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

1811-L
Wheel Work Bench

sturdy double-walled sheet steel construction
scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
Storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
7 drawers with ball bearings a nd full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
central locking system with cylinder lock and 2 keys
anti-tilt device (prevents several drawers from opening at the same time)
load capacity per drawer: 45 kg
door side with one shelve
stable handle
2 fixed and 2 braked swivel castors
total load capacity 450 kg
suitable assortments: all OMS-Modules

show more show less

Details

266S
Chisel and Punch Set

6 pcs.
in wooden holder
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

show more show less

Details

OMS-52L
Empty Module

empty module for OMS-52
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

show more show less

Details

135
Waterpump Plier with dipped insulation

adjustable in 7 positions
self-locking due to gripping surfaces staggered in reverse order for gripping pipes and nuts
box joint with clamping protection
matt chrome-plated
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000 V
according to DIN ISO 8976
ELORA Chrome-Vanadium 31 CrV3 /1.2208

show more show less

Details

1811-L WS OMS-5 PROLOG
Wheel Work Bench plus Assortements

Wheel Work Bench 1811-L
sturdy double-walled sheet steel construction
scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
Storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
7 drawers with ball bearings a nd full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
central locking system with cylinder lock and 2 keys
anti-tilt device (prevents several drawers from opening at the same time)
load capacity per drawer: 45 kg
door side with one shelve
stable handle
2 fixed and 2 braked swivel castors
total load capacity 450 kg
Tool Assortment WS OMS-5, 217-pcs
consisting of:
OMS-46 | OMS-48 | OMS-50 | OMS-53 | OMS-45

show more show less

Details

JUBI 600-S6
Wood Screwdriver Set in a black anniversary roll-up bag

6 pcs.
stored in a black anniversary roll-up bag
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

show more show less

Details

770-INMTIN
Socket Sets 1/2"

9 pcs. titan-coated
for inside hexagon screws
in black metal storage case with plastic insert
chrome-plated, polished
knurled
holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
blade made of ELORA-Vanadium special steel, gunmetal finished
according to DIN 7422

show more show less

Details

465-5 230BI PROLOG
Fuel Line Plier

for operating the quick-release fasteners
for MERCEDES-BENZ, VW-AUDI, FIAT, OPEL, CITROËN, VOLVO, MAN SCANIA, CLAAS
AdBlue lines and AdBlue injection nozzle
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

OMS-43L
Empty Module

empty module for OMS-43
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

2602 PROLOG
Torque Multiplier

perfect tool for heavy duty vehicles
1 step planetary gear
2 braces included
robust construction
surfaces matt-chrome plated/ gunmetal-finish
bi-directional actuation
accuracy better than +-4%
attention, only for static actuation
in black plastic case

show more show less

Details

1571-...
Engineer Steel Square with stop

90° plain blade
with exposed try square
zinc coated
steel

Details

OMS-35L/25L
empty Module

empty module for OMS-35 and 25
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 37,7 cm
hard foam insert

show more show less

Details

JUBI 500-S6
Screwdriver Set in a black anniversary roll-up bag

6 pcs.
stored in a black anniversary roll-up bag
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

5190-STE
Positioning Tweezer ESD,oblique, half round

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare black finish, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

show more show less

Details

617-S6 PROLOG
Electronic Screwdriver Set

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

show more show less

Details

463-1 PROLOG
Glow Plug Plier

pliers profile specially adapted to the plugs
angled design for use even with glow plug connectors that are difficult to access
recess prevents damage to the cable
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

131-250 PROLOG
Pliers Wrench

for parallel, full faced, zero blacklash firm gripping of multisided objects without harming of edges
parallel shiftable up to 52mm/ 2"
smooth jaws for jentle gripping and powerful pressing
fine push-button adjustment of all wrench sizes
high gripping force due to transmission >10:1
with scale for presetting proper widths of jaws
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

Details

565
Digital Multimeter

for measuring voltage, resistance, frequency, capacitance and temperature
for trade, industry, do-it-yourselfers as well as car, commercial vehicle and agricultural workshops
including measuring tips for clipping into the protective cover
including temperature probe from -20°C to 200°C
DC voltage: 0 - 600 V
AC voltage: 0 - 600 V
Direct current: 0 – 10 A
Alternating current: 0 - 10 A
Resistance: 0 - 60 MOhm
Diode test
During the continuity test, the integrated buzzer signals continuity below 50 Ohm
Frequency: 0 - 10 MHz
Duty cycle
Capacitance measurement: 0 - 60 MOhm
Automatic switch-off
Backlight
Data hold
True RMS
CAT III 600 V
including 2x AA batteries
easy operation thanks to clearly arranged control panel and large illuminated LCD display (all data quickly readable)
very short response times ensure rapid display of measurement results
optimal device alignment thanks to the stand on the housing
Protective cover protects multimeter against damage from being dropped

show more show less

Details

1210-L7B
Roller Tool Cabinet Buddy

7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS

show more show less

Details

870-E1D
Reversible Ratchet 3/8"

for Reversible Ratchet 870-1D

Details

OMS-20L
Module-Circlip Plier

empty module for OMS-20
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

4140-100
Adaptor 1/4"

for power tools
male square drive according to DIN 3120 A 6,3, ISO 1174
with ball locking device

Details

770-S17
Reparatursatz 3/4"

for the push through ratchet ELORA-770-S1ZI

Details

470-2
Bird Ringing Plier

for closing rings
suspension hole in one handle
with opening spring
nickel-plated, with dip-insulated handles
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

JUBI 304-S8
Circlip Plier Set in a black anniversary nylon bag with zip fastener

8 pcs.
stored in a black anniversary nylon bag with zip fastener
red dip insulated handles

Details

JUBI WS-24
Tool Assortment in a black anniversary nylon bag with zip fastener

33 pcs.
stored in a black anniversary nylon bag with zip fastener

Details

372-S14
Internal Extractor Set

14 pcs.
3 Universal pullers for outside Ø 10-160 mm
7 internal pullers for bores Ø 10-75 mm
2 support braces
1 slide hammer
high grade tool steel
in black plastic box with plastic foam insert

show more show less

Details

JUBI 403-S4
Plier Set in a black anniversary nylon bag with zip fastener

4 pcs.
stored in a black anniversary nylon bag with zip fastener
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

Details

1210-L7 WS OMS-5 PROLOG
Roller Tool Cabinet Buddy plus Assortements

Roller Tool Cabinet Buddy 1210-L7
7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
Tool Assortment WS OMS-5, 217-pcs
consisting of:
OMS-46 | OMS-48 | OMS-50 | OMS-53 | OMS-45

show more show less

Details

JUBI 900-S7 PROLOG
VDE Screwdriver Set in a black anniversary roll-up bag

7 pcs.
stored in a black anniversary roll-up bag

Details

OMS-22L
Empty Module

empty module for OMS-22
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

OMS-54L
Empty Module

empty module for OMS-54
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

OMS-11L/38L
Empty Module

empty module for OMS-11 and 38
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

1200-L
Servicecar BUGGY 100

solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
surface with rubber mat
2 swivel castors
Shelf 460 x 705 mm
total loading capacity 300 kg

show more show less

Details

372-S14 PROLOG
Internal Extractor Set

14 pcs.
3 Universal pullers for outside Ø 10-160 mm
7 internal pullers for bores Ø 10-75 mm
2 support braces
1 slide hammer
high grade tool steel
in black plastic box with plastic foam insert

show more show less

Details

334-100K
LED Head Lamp

two battery types (Li-Ion and AA) combine theadvantages of techargeable and replaceable batteries
innovative mounting system: easy removal and attachment of the lamp head for maximum flexibility
numerous mounting options thanks to metal clip on the lamp head
advanced Focus System for simple and intuitive adjustment of the light cone
compact and lightweight housing
mounting options on helmets: rubberized headband, self-adhesive mounting material
Luminosity: Power 400 lm / Low Power 20 lm
Lighting range: Power 180 m / Low Power 40 m
Lighting duration: Power 4 h / Low Power 35 h
Protection class: IP54

show more show less

Details

1517-150 PROLOG
Digital Vernier Caliper

reading 0,01 mm
for inside, outside and depth measurement (4 way measurement)
10 mm LCD-Display
Stainless steel
DIN 862

show more show less

Details

JUBI 900-S7
VDE Screwdriver Set in a black anniversary roll-up bag

7 pcs.
stored in a black anniversary roll-up bag

Details

242B-250
Oil Spray Can

242B-250: steadfast tin pot with a conical shape and a long metal injection pipe
with reinforced bottom edge, perforated intermediate bottom and pump lever

Details

2179-... PROLOG
Torque Wrench, with vernier scale

for controlled torque application from 4 – 335 Nm
main unit Nm with Nonius, secondary unit ft.lb.
safe locking of the adjusted torque value by securing button at the handle end
ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant
for clockwise fixing
with robust, matt steel tube
fine tooth ratchet, smallest possible swivel angle 8°
very noticeable and hearable ('click') signal
nonslip QUATROLIT®-2C-handle
according to EN ISO 6789:2017 Part 1, Typ II Class A
with traceable declaration of conformance
tripping accuracy + - 3% (2179-20 + -4%)

show more show less

Details

7936-...
Impact Locking Rings for Impact Sockets 2.1/2"

for locking impact sockets and operating tools
made of rubber elastic and oil resistant material
delivery time on request

Details

790 S6LT PROLOG
Impact Socket Set 1/2"

for power tools
in black metal storage case with OMS-hard foam insert
square according to DIN 3121, form F and G, ISO1174
tools made of special steel, phosphated

Details

OMS-29L
Empty Module

empty module for OMS-29
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

130BI-250 PROLOG
Waterpump Plier

quick setting by push-button
matt chrome plated
self-locking due to gripping surfaces staggered in reverse order
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN ISO 8976, Form A

show more show less

Details

WS OMS-6 PROLOG
Automotive

suitable for all Roller Tool Cabinets and Work Bench 1811-L

Details

1811-L WS OMS-6 PROLOG
Wheel Work Bench plus Assortements

Wheel Work Bench 1811-L
sturdy double-walled sheet steel construction
scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
Storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
7 drawers with ball bearings a nd full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
central locking system with cylinder lock and 2 keys
anti-tilt device (prevents several drawers from opening at the same time)
load capacity per drawer: 45 kg
door side with one shelve
stable handle
2 fixed and 2 braked swivel castors
total load capacity 450 kg
Tool Assortment WS OMS-6, 177-pcs
consisting of:
OMS-49 | OMS-51 | OMS-53 | OMS-47 | OMS-48

show more show less

Details

1220-L
Roller Tool Cabinet SUPER CADDY 100

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
very sturdy double-walled sheet steel construction
with lateral perforated wall
solid handlebar, mounting possible on both sides
sides panel with Euro-Perforation
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 45 kg
7 drawers with ball bearings and full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
anti-tilt device (prevents several drawers from opening at the same time)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm
full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS
combinable with tool chest ELORA-No. 1221-L
other drawer types and special colours on request

show more show less

Details

1383-L
Multi Purpose Case

ergonomic bow-type handle made of aluminium
2 large compartments offer storage space for tools and implements
compartments with handy cm/inch scale
Polypropylene

Details

583 S5-K-1
Screwdriver Sets

carton box packed
in black plastic packaging with transparent cover
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

show more show less

Details

OMS-36L/37L
Module-QUATROLIT®-2C-Screwdrivers

empty module for OMS-6 | 7 | 36 | 37
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

271S
Parallel Pin Punch Set

6 pcs.
in wooden holder
completely inductive hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

show more show less

Details

527 S10 PROLOG
Screwdriver Set Variant

10 pcs.
in black polyester bag
hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

JUBI 100-S8 PROLOG
Double Open Ended Spanner Set in a black anniversary roll-up bag

8 pcs.
stored in a black anniversary roll-up bag
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

show more show less

Details

OMS-42L
Module-VDE Pliers

empty module for OMS-42
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

OMS-48L
Empty Module

empty module for OMS-48
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

show more show less

Details

WS OMS-5 PROLOG
Industrial

suitable for all Roller Tool Cabinets and Work Bench 1811-L

Details

2601-3 PROLOG
Torque Multiplier

planetary gear (1-, 2- or 3-stepped)
specially hardened gear wheels
permanent internal greasing
sliding bearings on drive side and power take-off side
overload protection (one additional sun wheel with overload cutout is included)
exchangeable drive heads
matt chrome-plated /phosphated surfaces
bi-directional actuation
highest torque, high accuracy better than +-5% tolerance
attention, only for static actuation
in waterproof case

show more show less

Details

JUBI 600-S6 PROLOG
Wood Screwdriver Set in a black anniversary roll-up bag

6 pcs.
stored in a black anniversary roll-up bag
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

show more show less

Details

401/2-...
American Tinmans Shears

for long straight cuts
blades additionally inductive hardened and ground, 57-59 HRC
adjustable, bolted joint
high grade tool steel, forged
with trap protection
black handles, PVC dip coated

show more show less

Details

870-1D PROLOG
Reversible Ratchet 3/8"

rugged ratchet with small, slim head
forged gear wheel with safety locking and quick release button
smallest possible swivel angle 5°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 10, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

264KS
Drift Punch Set

6 pcs.
in plastic holder
completely hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

show more show less

Details

173S-3
Universal Puller Set

2/3 arms with 3 pairs of hooks in different lengths
especially suitable for difficult to reach areas
zinc-plated, spindle and pulling hook end gunmetal-finish
high grade tool steel

Details

OMS-18L
Empty Modules

empty module for OMS-18
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

2070-800 PROLOG
Torque Wrench 3/4" with vernier scale

for controlled torque application from 100 - 1000 Nm
main measurement unit for Nm with vernier scale, auxiliarymeasurement unit for ft.-lb.
Safe locking of the adjusted torque value by securing button at the handle end
ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant
bi-directional fixing by turning the torque wrench
push through ratchet 3/4' with smallest swivel angle 6°
with robust, matt steel tube
2070-1000 with sandblasted satin surface with very noticeable and audible ('click') signal
nonslip QUATROLIT®-2C-handle
according to EN ISO 6789:2017 Part 1, Typ II Class A
with traceable declaration of conformance
tripping accuracy +- 4%

show more show less

Details

1385-L WS-4M PROLOG
Installation Tool Bag plus Tool Assortment

robust tool bag with moisture repellent bottom
solid metal handle with padded grip
removable cover and padded carrying strap
outside 5 compartments with hook and loop fastener, fixation for water level
inside 10 pockets and 8 hangers
made of tear-proofed durable nylon
Tool assortment WS-4M, 131-pcs.

show more show less

Details

7903-...
Impact Locking Pins for Impact Sockets 1/2"

for locking impact sockets and operating tools
made of alloyed special steel

Details

JUBI WS-24 PROLOG
Tool Assortment in a black anniversary nylon bag with zip fastener

33 pcs.
stored in a black anniversary nylon bag with zip fastener

Details

OMS-1L
Module-Combination Spanners, cranked

empty module for OMS-1
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

1210-L7 PROLOG
Roller Tool Cabinet Buddy

7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS