Made in Germany

Details

1215-L PROLOG
Roller Tool Cabinet CADDY 100

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
storage surface made of PS (polystyrene), solvent-resistant, with integrated storage compartments
solid handlebar, mounting possible on left sides
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 45 kg
7 drawers with ball bearings and full-extension runners
individual drawer locking over the whole ledge (one-hand operation)
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS
combinable with tool chest ELORA-No. 1221-L
other drawer types and special colours on request

show more show less

Details

OMS-3L/4L
Empty Module

empty module for OMS-3 and 4
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

486
Adjusting Plier

for gripping small components and wires and for bending contacts and relay springs
with slightly serrated gripping surfaces, ground heads
with dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

Details

600-IS...ESD
Electronic Screwdriver ESD

for plain slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

600-S15
ESD Set

15 pcs.
in black plastic box with 2-colour foam material
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

Details

243MB-1 PROLOG
Balance Weight Plier

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
with plastic head on the hammer side, especially for painted weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

OMS-31L
Empty Module

empty module for OMS-31
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

610-PH...ESD
Electronic Screwdriver ESD

for cross slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

612-PZ...
Electronic Screwdriver

for cross slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

Details

616-S6
Electronic Screwdriver Set

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

show more show less

Details

618-S6
Electronic Screwdriver Set

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

620-TTX...ESD
Electronic Screwdriver ESD

suitable for smallest inside TORX®screws with locking pin, for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

show more show less

Details

620-TX...
Electronic Screwdriver

for inside TORX®screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

620-TX...ESD
Electronic Screwdriver ESD

for smallest inside TORX®screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

625-...ESD
Electronic Screwdriver ESD

for inside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

625-KU...ESD
Electronic Ball End Screwdriver ESD

for inside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

630-...ESD
Electronic Socket Spanner ESD

for outside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶ – 10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

show more show less

Details

636-IS...
Screwdriver

for plain slotted screws
blade through handle, dull chrome plated with forged hexagon section
through hardened
blade edge gunmetal finished
wooden handle, clear lacquered with leather cap
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
similar DIN ISO 2380-2, blade edge according to DIN ISO 2380-1

show more show less

Details

OMS-24L
Empty Module

empty module for OMS-24
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

649-IS...
Electricians Screwdriver

for plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

Details

656-PH...
Screwdriver

for cross slotted screws
blade through handle, dull chrome plated with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
similar DIN ISO 8764-2, tip according to DIN ISO 8764-1 PH

show more show less

Details

658-PZ...
Screwdriver

for cross slotted screws
blade through handle, dull chrome plated with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
similar DIN ISO 8764-2, tip according to DIN ISO 8764-1 PZ

show more show less

Details

OMS-17L
Empty Module

empty module for OMS-17
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

66A-...
Pipe Wrenches

Swedish type
for highest operational demands
head angled at 90°
drop forged, hardened and tempered
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
roll non-volatile
red laquered,polished jaws
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
according to DIN ISO 5234, Form A

show more show less

Details

OMS-51L
Empty Module

empty module for OMS-51
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

show more show less

Details

670 S7-K, 673 S7-K
Screwdriver Sets

7 pcs.
carton box packed
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

show more show less

Details

676 S5-K / 677 S5-K
Screwdriver Sets

5 pcs.
carton box packed
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

show more show less

Details

67E-...
Pipe Wrenches

for highest operational demands
head angled at 45°
drop forged, hardened and tempered
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
roll non-volatile
red laquered, polished jaws
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
according to DIN ISO 5234, Form B

show more show less

Details

464-200BI PROLOG
Spark Plug Plier

hooked jaws
for difficult to pull down spark plug sockets
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

1221-L PROLOG
Tool Chest

3 ball bearing mounted drawers
individual drawer locking over the entire strip (one-hand operation)
lateral central locking of all drawers with cylinder lock
load capacity per drawer: 45 kg
drawers: 3 x 75 mm
internal drawer dimensions: 410 x 573 mm
suitable for ELORA-Nr. 1220-L und 1215-L
suitable assortments: OMS

show more show less

Details

178-28
Stud Extractor

for left and right hand thread
zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
high grade tool steel C45 / 1.0503

Details

70-1
Multi Fitting Key

female square 5, 6, 7-8 mm
female three-square 8-9 mm
Multi Fitting Key: 3-5 mm
5 mm square for radiator valves
body with ¼" bit holder with magnet
dimensions: 97 x 25 mm
zinc die-casting

show more show less

Details

70-2
Multi Fitting Key, 9 in 1

for all usual technical shut-off systems
1 tool for 9 applications
8 different master cabinet shut-off systems and 5 mm square for radiator valves
flat construction due to space saving swivel mechanism
square locking: 5, 6, 7-8, 9-10 mm
three-edged locking: 7, 8-9, 10-11 mm
two-way-key 3-5 mm and half-moon locking 6 mm
securing chain with snap-hook
Dimensions: 95 x 95 mm
Zinc die-casting

show more show less

Details

70-3
Multi Fitting Key, Electrical

for closings of: pneumatic and hydraulic systems
magnetic valves in automobile- and machinery sector
magnetic valves of oil heating
contactless detection of permanent magnets
contactless voltage field sensor
implemented magnetic field sensor
dimensions: approx.: 158 x 28 mm
female square 5, 6, 7-8 mm
female three-square 9 mm
5 mm square for radiator valves
two-way-key 3-5 mm
magnetic bit adaptor 1/4", supplied with one bit PH 2
screwdriver function with retaining clip
zinc die-casting

show more show less

Details

OMS-27L
Empty Module

empty module for OMS-27
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

730-...
Offset Key

for cross slotted screws
matt chrome plated, tip gunmetal finished
Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 5208, blade according to DIN ISO 8764-1 PH

Details

527 S10
Screwdriver Set Variant

10 pcs.
in black polyester bag
hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

740-...
Offset Key

for plain slotted screws
matt chrome plated
Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 5200, blade according to DIN ISO 2380

Details

745
Round Awl

chrome-plated blade
nonslip QUATROLIT®-2C-handle
with suspension hole
special steel

Details

746
Square Awl

chrome plated 4 square blade
nonslip QUATROLIT®-2C-handle
with suspension hole
special steel

Details

470-5
Bird Ringing Plier

for closing rings
suspension hole in one handle
nickel-plated, with dip-insulated handles
ELORA-high grade tool steel C45 / 1.0503

Details

760/761STX-...
Screwdriver Sets

6 pcs.
STX=for inside TORX® screws
STTX=for inside TORX® safety screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

760TX-...
Screwdriver

for inside TORX® screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

760TX-30/300
Screwdriver, extra long

for inside TORX® screws
for low placed screw connections e.g. instrument board and car body
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

761TTX-...
Screwdriver

for inside TORX® safety screws
with bore hole in tip
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

762-TX20/300
TORX®-Key with T-Handle, extra long

for inside TORX® screws
gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

762-TX30/300
TORX®-Key with T-Handle, extra long

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

OMS-30L
Empty Module

empty module for OMS-30
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

762TTX-...
TORX®-Key with T-Handle

for inside TORX® safety screws
with hole at drive end
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

762TX-...
TORX®-Key with T-Handle

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
TX-6 to TX-45: Chrome-Vanadium 61CrSiV5 / 1.2243
TX-50 and TX-60: Chrome-Vanadium 59CrV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

770-L20-...
Spark Plug Socket 1/2"

extra deep, with rubber insert
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

770-L21
Radiator Drain Socket

especially appropriate for Caterpillar vehicles
slot width 11 mm
female square drive according to DIN 3120-C 12,5, ISO 1174 with ball retaining groove
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

770-LTD
Socket for Injection Nozzle

appropriate for injection nozzles on Diesel engine vehicles
size 27 mm, recessed internal contour
hot-forged
chrome-plated
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

771LMG-...
Spark Plug Socket 1/2"

extra deep, with permanent magnet
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

771LTZ-...
Spark Plug Socket 1/2"

extra deep, with rubber insert and bore hole Ø 9 mm
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

325-...
Tapered Blades

for pulling off ball and roller bearings and close-fitting components
zinc-plated, spindles gunmetal-finish
high grade tool steel

Details

489-3
Seaming Plier, 90° bent

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

Details

463 PROLOG
Glow Plug Plier

straight edition
for plugging on and pulling down of deep-seated glow plugs
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

5190-ST
Positioning Tweezers, half round

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

467-BI 160 PROLOG
Sealing Plier with side cutter

for sealing and cutting the sealing wire
suitable for lead and plastic seals
stamp [diameter]8mm, neutral, interchangeable
polished chrome-plated
with dip-insulated handles
ELORA-high grade tool steel C60 / 1.0601

show more show less

Details

470-135
Bird De-Ringing Plier

for opening metal rings or for ringing with plastic rings
with opening leaf spring
chrome-plated, checkered handles
ELORA Chrome-Vanadium 31CrV3 / 1.2208

Details

OMS-10L
Module-Pliers

empty module for OMS-10
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

176-S
Windscreen Wiper Arm Puller Set

8 pcs.
for removing screen wiper arms
heavy-duty, forged pattern
zinc-plated, spindle gunmetal-finish
high grade tool steel
in black plastic box with plastic foam insert

show more show less

Details

855-...
Tommy Bar Tubes

for use with construction ring spanners ELORA-No. 85
chrome plated
steel tube

Details

85A-...
Construction Ring Spanner, inch

heavy, deep cranked pattern
for use with tommy bar tubes ELORA-No. 855
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

show more show less

Details

1221-L
Tool Chest

3 ball bearing mounted drawers
individual drawer locking over the entire strip (one-hand operation)
lateral central locking of all drawers with cylinder lock
load capacity per drawer: 45 kg
drawers: 3 x 75 mm
internal drawer dimensions: 410 x 573 mm
suitable for ELORA-Nr. 1220-L und 1215-L
suitable assortments: OMS

show more show less

Details

85M-...
Construction Ring Spanner, metric

heavy, deep cranked pattern
for use with tommy bar tubes ELORA-No. 855
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

show more show less

Details

85S.../85L...
Construction Ring Spanner-Sets

heavy, deep cranked pattern
matt chrome plated
on yellow metal display board
Size: 895 x 725 mm
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

show more show less

Details

86A-...
Ring Slogging Spanner, inch

heavy, drop-forged type
sand-blasted
further sizes on request
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 7444

show more show less

Details

86M-...
Ring Slogging Spanner, metric

heavy, drop-forged type
sand-blasted
further sizes on request
from 22 mm until 115 mm: ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
from 120 mm until 165 mm: ELORA-Tempering steel C35 / 1.0501
according to DIN 7444

show more show less

Details

86S-13
Ring Slogging Spanner-Set

heavy, drop-forged type
sand-blasted
on yellow metal display board
Size: 895 x 500 mm
further sizes on request
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 7444

show more show less

Details

871TMG-...
Spark Plug Socket 3/8"

extra deep, with permanent magnet
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 10, ISO 1174, with ball
retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

871TZ-...
Spark Plug Sockets 3/8"

extra deep, with rubber insert
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 10, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

87A-...
Open End Slogging Spanner, inch

heavy, drop-forged type
sand-blasted
further sizes on request
up to 110 mm and all AF-Sizes: Chrome-Vanadium 31 CrV 3 / 1.2208
from 115 mm: ELORA-Tempering steel C35 / 1.0501
according to DIN 133

show more show less

Details

87M-...
Open End Slogging Spanner, metric

heavy, drop-forged type
sand-blasted
further sizes on request
Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 133

show more show less

Details

88-...
Single End Ring Spanner

straight pattern
with suspension eye
sand-blasted
further sizes on request
ELORA-Tempering steel C35 / 1.0501
according to DIN 3111

show more show less

Details

326-...
Pulling Unit for Separators

for pulling off ball and roller bearings and close-fitting components
zinc-plated, spindles gunmetal-finish
high grade tool steel

Details

890-...
Hook Wrench with Nose

for grooved nuts according to DIN 1804, antifriction bearing bolt, according to DIN 981
gunmetal finished
rounded edges for better handling
high grade tool steel
according to DIN 1810, Form A

show more show less

Details

890-V...
Adjustable Hook Wrenches with Nose

for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
special steel, hardened
gunmetal finished
high grade tool steel

show more show less

Details

890-VG...
Hinged Hook Wrench with Nose

Short design, fits in every pocket and toolbox
for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
high grade tool steel, hardened
gunmetal finished

show more show less

Details

891-...
Hook Wrench with Pin

for nuts with radial holes according to DIN 1816 and DIN 548
rounded edges for better handling
gunmetal finished
high grade tool steel
according to DIN 1810, Form B

show more show less

Details

892-...
Adjustable Pin Wrench

for nuts with two holes according to DIN 547, spring flange and flange nuts according to DIN 44716
gunmetal finished
high grade tool steel
according to DIN 3116

Details

5340-ST
Electronic Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

Details

OMS-8L
Empty Module

empty module for OMS-8
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

show more show less

Details

900IS-...
VDE Screwdriver

for plain slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
up to ELORA-No. 900IS-100 ELORA-Chrome-Vanadium 73MoV52 / 1.2381 else ELORA-Chrome-Vanadium 59CrV4 / 1.2242
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
blade according to DIN ISO 2380-1

show more show less

Details

904-S10
VDE Set

10 pcs.
in red plastic box with 2-colour plastic inlay
VDE insulated up to 1.000V, according to EN 60900/IEC 60900

Details

904-S3
VDE Plier Set

3 pcs.
carton box packed
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900

Details

905-...
VDE Screwdriver

for external hexagon screws
gunmetal-finish blade
impact resistant QUATROLIT-2C-handle with pin hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
VDE insulation up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
according to DIN 7445, ISO2725-1

show more show less

Details

910PH-...
VDE Screwdriver

for cross slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
up to ELORA-No. 910PH-0 ELORA-Chrome-Vanadium 73MoV52 / 1.2381, otherwise ELORA-Chrome-Vanadium 59CrV4 / 1.2242
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
tip according to DIN ISO 8764-1 PH

show more show less

Details

912PZ-...
VDE Screwdriver

for cross slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
ELORA-Chrome-Vanadium 73MoV52 / 1.2381
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
tip according to DIN ISO 8764-1 PZ

show more show less

Details

243MB PROLOG
Balance Weight Plier

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

Details

271KS
Parallel Pin Punch Set

6 pcs.
in plastic holder
completely inductive hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

show more show less

Details

920-165
VDE Flat Nose Plier with Handle Insulation

for holding and bending
short jaws, serrated gripping surface
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

930-...
VDE Snipe Nose Pliers with Handle Insulation

serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

935-45...
VDE Snipe Nose Pliers with Handle Insulation

45° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

935-90 205
VDE Snipe Nose Plier with Handle Insulation

90° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier similar to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

940-165
VDE Round Nose Plier with Handle Insulation

with short jaws, serrated gripping surface
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

950-...
VDE Universal Side Cutter with handle insulation

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

955-...
VDE Heavy Duty Side Cutter with Handle Insulation

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C60 / 1.0601

show more show less

Details

956-L...
Hexagon Key with T-Handle

for inside hexagon screws
gunmetal finished
ELORA-Chrome-Vanadium steel
DIN ISO 2936
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

show more show less

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h