Made in Germany

Previous
1
2
3
4
5
6
Next

304-S4
Circlip Plier Set

Circlip Plier Set

4 pcs.
carton box packed
red dip insulated handles

3040-RIB...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for RIBE®-CV-screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 6,3, ISO 1173
RIBE® = reg. trademark of Richard Bergner GmbH &Co KG, Schwabach

3050-IPR...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for TORX Plus®IPR-screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
external hexagon according to DIN 3126 C 6,3, ISO 1173
TORX Plus®= reg. trademark of Acument Intellectual Properties, LLC. USA

3050-TX...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

3070-TTX...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for inside-TORX®safety screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

310-...
Mechanical Nut Splitter

Mechanical Nut Splitter

to split fixed or overtightened nuts to strength class 6
zinc plated, inductive hardened chisel edge
Heat-treated steel

3100-IS...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-1

3110-IN...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-3

3120-PH...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for cross slotted screws PH
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH

3121-PZ...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for cross slotted screws PZ
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ

3130-XZN...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for inside multi-point B &S and XZN screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173

314S3
V-Belt Pulley Puller Set

V-Belt Pulley Puller Set

15 pcs. for following applications:
Variant 1 for V-belt pulleys with threaded holes
1 short beam for V-belt pulleys Ø 43-120 mm
1 long beam for V-belt pulley Ø 95-210 mm
3 exchangeable push-pieces to use as spindle extension
Variant 2 for V-belt pulley without threaded holes
1 short beam for V-belt pulleys Ø 24-100 mm
1 long beam for V-belt pulley Ø 85-195 mm
Hooks for narrow spaces for clamping depth up to 68 mm, respectively extension up to 88 mm
Variant 3 with 2 hooks to reach the rills of the V-belt pulley
1 short beam for V-belt pulleys Ø 80-140 mm
1 long beam for V-belt pulley Ø 135-235 mm
in a black plastic case 260 x 210 x 62 mm
high grade tool steel, zinc-plated
spindle and push-pieces gunmetal-finish

show more show less

315
Hydraulic Nut Splitter

Hydraulic Nut Splitter

to split fixed or overtightened nuts up to strength class 10
Hydraulic execution
gunmetal finished spindle
High grade tool steel C45 / 1.0503

3150-TX...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3128 C 8, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

316
Hydraulic Nut Splitter

Hydraulic Nut Splitter

to split fixed or overtightened nuts up to strength class 10
hyraulic execution
high grade tool steel C45 / 1.0503

317-...
Standard Puller

Standard Puller

for pulling off ball bearings, gear-wheels, discs, etc.
heavy-duty, forged pattern
2 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

3170-TTX...
Screwdriver Bits 5/16"

Screwdriver Bits 5/16"

for inside-TORX®safety screws
ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

318-S5
Mounting Wedge

5 pcs.
carton box packed
suitable for works on panelling, dash board and garnish mouldings
special plastic POM, black

320-...
Puller

for pulling off ball bearings, gear-wheels, v-belt pullers etc.
3 arms, with double-sided useable hook ends
zinc-plated, spindle gunmetal-finish
high grade tool steel

321-...
Carpenters

for highest operational demands
inductive hardened cutting blades
cutting blades hardness 61-63 HRC
gunmetal-finish, ground head
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 9243 Form A

322-...
Puller

for pulling off ball bearings at difficult to reach areas
with particularly narrow hooks
automatical fitting of the hooks due to scissor effect
zinc-plated, spindle gunmetal-finish
high grade tool steel

323-...
Joint Bolt Puller

Joint Bolt Puller

for gentle removing of ball joint pivots on steering tie rods and stabilizers
suitable for difficult to reach areas
zinc-plated, gunmetal-finish
high grade tool steel

324S15
Windscreen Wiper Arm Puller Set

Windscreen Wiper Arm Puller Set

15 pcs.
for removing screen wiper arms
heavy-duty, forged pattern
zinc-plated, spindle gunmetal-finish
high grade tool steel
in black plastic box with plastic foam insert

325-..., 326-...
Separators and Tapered Blades

Separators and Tapered Blades

for pulling off ball and roller bearings and close-fitting components
zinc-plated, spindles gunmetal-finish
high grade tool steel

325S-...
Puller/Separator Set

Puller/Separator Set

containing one puller, one separator and one set of drawbar extensions
zinc-plated, spindle gunmetal-finish
in black plastic box with plastic foam insert

327-...
Universal Puller

Universal Puller

heavy-duty, forged pattern
3 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

327K-...
Universal Three Leg Pullers with Hooks

Universal Three Leg Pullers with Hooks

heavy duty, forged pattern
3 arms with very narrow forged hooks
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle and hook ends gunmetal-finish
high grade tool steel

328
Joint Bolt Puller

Joint Bolt Puller

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated
high grade tool steel

329-...
Separators

for removing connecting rods, ball rods, drop arms etc.
massive forged pattern
handle knurled
zinc-plated
high grade tool steel

331
Welder's Chipping Hammer

Welder's Chipping Hammer

with steel tube handle
coated

3415
Hand Bit Holder 1/4"

Hand Bit Holder 1/4"

bit lock with permanent magnet
nonslip QUATROLIT®-2C-handle
with suspension hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female hexagon drive according to DIN 3126 D 6,3, DIN ISO 1173

3436-S36
Bit-Box 1/4"

36 pcs.
in black yellow plastic box with belt clip and suspension hole
magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3
bits made of ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
35 bits with male hexagon drive according to DIN 3126 C 6,3
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

350-...
Screw Extractor

Screw Extractor

for extracting broken screws and bolts with right-hand thread
chrome vanadium 58CrV4 / 1.8161

351S 5, 352S 6, 353S 8
Screw Extractor Set

Screw Extractor Set

in black plastic box
for extracting broken screws and bolts with right-hand thread
chrome vanadium 58CrV4 / 1.8161

359
Mounting Punch

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328

361
Slit or Car Body Chisel, extra flat

Slit or Car Body Chisel, extra flat

for car body work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

361HS
Hand Guard for Slit or Car Body Chisel

Hand Guard for Slit or Car Body Chisel

hand protection against impacts
no rolling away due to octagonal shape
only for ELORA-No. 361
made of impact resistant special rubber

362-...
Bricklayer´s Chisel, flat oval

Bricklayer´s Chisel, flat oval

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7254 Form A

364-...
Point Chisel, octagonal

Point Chisel, octagonal

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7256

365-...
Electrician

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

370-...
Snipe Nose Pliers with side cutter, straight

Snipe Nose Pliers with side cutter, straight

serrated gripping surface and side cutter
maximum stability under load of the blades by inductive hardening
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

371-...
Snipe Nose Pliers with side cutter, bent

Snipe Nose Pliers with side cutter, bent

45° bent, serrated gripping surface and side cutter
maximum stability under load of the blades by inductive hardening
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

372-...
Internal Extractor

Internal Extractor

for extracting close-fitting ball-bearings over the inner bearing ring
to use with counter support ELORA-No. 373
gunmetal-finish
high grade tool steel

372S13
Puller Set

13 pcs.
3 Universal pullers for outside Ø 10-160 mm
7 internal pullers for bores Ø 10-75 mm
2 support braces
1 slide hammer
high grade tool steel
in black plastic box with plastic foam insert

372S9
Internal Extractor Set

Internal Extractor Set

9 pcs.
for extracting ball-bearings, ball-bearingrings and bushinger with a bore diameter of Ø 10–75 mm
high grade tool steel
in black plastic box with plastic foam insert

373-...
Counter Supports

Counter Supports

counter support for internal extractor ELORA-No. 372
zinc-plated, spindle gunmetal-finish
high grade tool steel

376-160
Flat Nose Plier

Flat Nose Plier

for holding and bending
long, flat jaws, rippled serrated surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

377-160
Round Nose Plier

Round Nose Plier

long jaws, serrated gripping surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

383-J1-J4
Circlip Pliers for internal retaining ring

Circlip Pliers for internal retaining ring

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

383-J11-J41
Circlip Pliers for internal retaining ring

Circlip Pliers for internal retaining ring

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

384-A0-A4
Circlip Pliers for external retaining ring

Circlip Pliers for external retaining ring

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

384-A01-A41
Circlip Pliers for external retaining ring

Circlip Pliers for external retaining ring

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

385
Hand Lever Grease Gun

Hand Lever Grease Gun

high-quality industrial design with short stroke
continuous fixation, air release valve on the pump head
fat lead by means of spring force in the press head
dummy lubrication excluded
Working pressure 400 bar, test pressure 800 bar, capacity about 1.9 cc / stroke
filling can be done with bulk grease (500cc) or cartridge (400g)
incl. reinforced hose (1000 bar burst pressure) and hollow nozzle
housing made of steel, painted silver, black plastic handle

show more show less

389-...
Heavy Duty Side Cutter

Heavy Duty Side Cutter

high cutting performance with minimal effort
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

392-...
Side Cutter

oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

395-...
Combination Pliers

Combination Pliers

strong edition for tough conditions
maximum stability under load of the blades by inductive hardening
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

400B-...
Letter Punch Sets

Letter Punch Sets

27 pcs.
for driving letters by impact into steel
27 capital letters, from A to Z and ''&''
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

400Z-...
Number Punch Sets

Number Punch Sets

9 pcs.
for driving numbers by impact into steel
9 numbers from 0-9
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

404-S3
Mechanic's Plier Set

Mechanic's Plier Set

3 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

404-S31
Mechanic's Plier Set

Mechanic's Plier Set

3 pcs.
carton box packed
chrome-plated, polished

404-S4
Electrician's Plier Set

Electrician's Plier Set

4 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

404-S41
Circlip Plier Set

Circlip Plier Set

4 pcs.
carton box packed
chequered handles
chrome-plated, polished joint

404-S8
Circlip Plier Set

Circlip Plier Set

8 pcs.
assortment in convenient plastic case
chrome plated, polished joint, chequered handles

5280-ST
Electronic Tweezer

Electronic Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

408
Step Arbor

for expanding copper tubes
black, made of special steel

4100-IS...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-1

4110-IN
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-3

4120-PH...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for cross slotted screws PH
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH

4130-PZ...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for cross slotted screws PZ
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ

4150-...
Bitholder 1/4"

bit lock with permanent magnet resp. spring clips
with stainless steel sleeve, diameter 9,5 mm
female hexagon drive according to DIN 3126- D 6,3
male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
according to DIN 7427 Form D

4160-TX...
Screwdriver Bits 1/4"

Screwdriver Bits 1/4"

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

432
Electronic Side Cutter

Electronic Side Cutter

oval head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finished, polished head
ELORA-high grade tool steel C60 / 1.0601

435
Electronic Side Cutter

Electronic Side Cutter

pointed head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finish, polished head
ELORA-high grade tool steel C60 / 1.0601

4490
Bag or Wire Twister

Bag or Wire Twister

for fast and efficient closing of connecting tyre levers
with moulded plastic grip

4510
Electronic Side Cutter ESD

Electronic Side Cutter ESD

for cutting in places difficult to access, for work with endangered electronic components
pointed, narrow head, small version with fine bevel, maximum stability under load of the cutting edges by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4520-...
Electronic Side Cutter ESD

Electronic Side Cutter ESD

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finished, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4530-...
Electronic Side Cutter ESD

Electronic Side Cutter ESD

for all work with electrostatic endangered components
oval head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4540
Electronic Side Cutter with Wire Trapping Spring ESD

Electronic Side Cutter with Wire Trapping Spring ESD

with trapping wire to cut off wire, for all work with electrostatic endangered components
oval head with wire trapping spring, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4550-...
Electronic Side Cutter ESD

Electronic Side Cutter ESD

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4560
Electronic Side Cutter ESD

Electronic Side Cutter ESD

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4570
Electronic Oblique Tip Cutter ESD

Electronic Oblique Tip Cutter ESD

for virtually flush cutting of thin, soft wires in places difficult to access, for work with electrostatic endangered components
extra narrow head, fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-Chrome-Vanadium 80CrV2 / 1.2235
DIN ISO 9654, ESD: DIN IEC 614340-5-1

458
Revolving Punch and Eyelet Plier

Revolving Punch and Eyelet Plier

for pre-punching and pressing of eyelets 458S-4,5, 458S-5,0, 458S-5,5
bright nickel plated, with black ergonomically formed plastic handles
high-strength special tool steel

4580-...
Electronic Oblique Cutter ESD

Electronic Oblique Cutter ESD

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4590
Electronic Oblique Cutter ESD

Electronic Oblique Cutter ESD

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
wide head, long cutting edges, with fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

460
Revolving Punch Plier with leverage

Revolving Punch Plier with leverage

70% power saving by leverage
for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
bright nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

461
Revolving Punch Plier

Revolving Punch Plier

for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

4620
Electronic Tungsten Carbide Side Cutter ESD

Electronic Tungsten Carbide Side Cutter ESD

for cutting very hard materials with coincident maximum stability under load, for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load due to carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

463
Glow Plug Plier

Glow Plug Plier

straight edition
for plugging on and pulling down of deep-seated glow plugs
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

4630
Electronic Tungsten Carbide Side Cutter ESD

Electronic Tungsten Carbide Side Cutter ESD

for cutting very hard wires which are difficult to access, for all work with electrostatic endangered components
pointed, narrow head with groove and fine bevel, small version, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

464-...
Spark Plug Plier

Spark Plug Plier

hooked jaws
for difficult to pull down spark plug sockets
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

4640
Electronic Tungsten Carbide Oblique Cutter ESD

Electronic Tungsten Carbide Oblique Cutter ESD

for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

465-...
Spark Plug Pliers

Spark Plug Pliers

for difficult to access spark plug sockets
jaw length 50mm
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

4660-...
Electronic Snipe Nose Pliers ESD

Electronic Snipe Nose Pliers ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
short, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH = smooth gripping surface
MH = serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

466A-...
Cable End Sleeve Pliers

Cable End Sleeve Pliers

for pressing of end-sleeves according to DIN 46228 part 1 and 4
with side cutter and wire stripping mechanism for soft wire
red handles, PVC dip insulated
ELORA-high grade steel C45 / 1.0503

4670
Electronic Snipe Nose Plier ESD

Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, short jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

OMS-16L
Module Engineer Screwdrivers

Module Engineer Screwdrivers

empty module for OMS-16
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

468-BI
Wire Stripper/Cutter

Wire Stripper/Cutter

side cutter with dual function (cutting and stripping of insulation)
stripping holes for single and multi-wire conductors with 1,5 mm² and 2,5 mm² diameter
oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
similar DIN ISO 5749

show more show less

4680
Electronic Snipe Nose Plier ESD

Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

469
Circlip Plier for external retaining rings

Circlip Plier for external retaining rings

for external retaining rings without holes
straight jaws, self-opening due to mounted double leaf spring
chrome-plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

4690
Electronic Snipe Nose Plier ESD

Electronic Snipe Nose Plier ESD

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, straight long jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

Previous
1
2
3
4
5
6
Next