Made in Germany

195CV-...
Four Way Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and wheel bolts of trucks and tractors
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

195CV-17, 195CV-5/8
Four Way Wheel Nut Wrench

Details

for cars, light trucks and agricultural machinery
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

196-...
Four Way Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and bolts of trucks, tractors and construction machinery
heavy-duty pattern due to forged centrepiece
dimensions: 750 x 750 mm
additional 13 / 16” female square within the size 32 mm for operating of wheel nuts with male square
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

OMS-9L
Empty Module

Details

empty module for OMS-9
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

489-2
Seaming Plier, 45° bent

Details

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

210A-...
Hexagon Tubular Box Spanner, inch

Details

for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

210M-...
Hexagon Tubular Box Spanner, metric

Details

for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube, hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

210S...AF
Hexagon Tubular Box Spanner-Sets, inch

Details

carton box packed
for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

show more show less

210S...M
Hexagon Tubular Box Spanner-Sets, metric

Details

carton box packed
for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

show more show less

211-...
Tommy Bars

Details

for hexagon tubular box spanners No. 210 and 217
hardened, chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 900, Form A

212-...
Stepped Tommy Bars

Details

for hex. tubular box spanners ELORA-No. 206, 210 and 217
hardened, chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 900, Form C

213-...
Hexagon Nut Driver, flexible

Details

nonslip QUATROLIT®-2K-handle
with suspension hole
limited torque!
chrome plated

214-...
Hexagon Nut Driver with T-Handle

Details

short and long type
plastic T-handle with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

215-...
Hexagon Nut Driver, short

Details

short version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

216-...
Hexagon Nut Driver, long, metric

Details

long version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3125, ISO 2725-1

216A-...
Hexagon Nut Driver, long, inch

Details

long version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3125, ISO 2725-1

217-...
Tubular Box Spanner with Handle

Details

long version
with drilled hole for tommy bars
for use with tommy bars ELORA-No. 211
with QUATROLIT®-handle
with suspension hole
seamless steel tube, hardened
matt chrome plated
Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

218-.../220-...
Tubular Spark Plug Wrench

Details

for spark plugs of size 16 mm (5/8" AF)
to operate with tommy bar ELORA-No. 229D
female square drive according to DIN 3120-C 10, ISO 1174 respectively DIN 3120-C 12,5, ISO, with ball retaining groove
made of seamless precision tube
hardened, matt chrome-plated
high grade tool steel C45/1.0503
tommy bars are not included

219
Tubular Spark Plug Wrench

Details

to operate with tommy bar ELORA-No. 229D
with rubber insert 20,8 mm
hollow shaft made of seamless tube
hardened
matt chrome-plated
high grade tool steel C45/1.0503
tommy bars are not included

222-...
Spark Plug Wrench

Details

pattern with swivelling actuating bracket
hardened, chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

227
Drain Plug Wrench

Details

for loosening and tightening of oil female square drive screws
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

229D
Tommy Bar

Details

for tubular spark plug wrench ELORA-No. 218, 219, 220
hardened, matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

231-...
Mounting Check Plug

Details

for positioning of drill bores
shaft tolerance h9
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

232-...
Piston Ring Compressors

Details

for pre-loading of the piston rings during insertion of the pistons into the cylinder
light pattern, continuously adjustable
wrench included
high-tensile spring band steel C75 / 1.0605

232S-...
Piston Ring Compressors

Details

for pre-loading of the piston rings during insertion of the pistons into the cylinder
heavy pattern, continuously adjustable
wrench included
high-tensile spring band steel C75 / 1.0605

234
Valve Spring Retainer Plier

Details

for inserting valve spring retainer
metal sheet, nickel plated

235-...
Piston Ring Pliers

Details

for inserting and removing piston rings
nickel-plated, with plastic handles
high grade tool steel C45 / 1.0503

235-60
Piston Ring Plier

Details

with prism holder for safe spreading of different piston rings
nickel plated
prism holder gunmetal-finish
high grade tool steel C45 / 1.0503

237-...
Flexible Magnetic Lifter

Details

for lifting small parts in hard to reach places
with flexible shaft
Shaft made of steel
2-C QUATROLIT handle with hanging hole

241SB-...
Cutting and Flaring Sets

Details

3 pcs.
for beading of copper and light alloy tubes
flaring cone 90 ° hardened, corresponds to 45 ° at the tube
body made of zinc die-cast
jaws made of steel, smooth inside, phosphated
pipe cutter with a cutting wheel and two guide rollers
ergonomic rotary knob with integrated trim knife
painted, gunmetal finished spindle
cutting wheel made of high alloy special steel

show more show less

242B-500
Oil Spray Can

Details

Model with flexible spray tube and pump lever
Container made of steel, plastic cover

243MB
Balance Weight Plier

Details

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

244-1
Hose Clamp Plier

Details

for simple self spanning wire hose clamps (e.g. washing machines)
lockable in 3 positions
nickel-plated
jaws made of high grade tool steel C45 / 1.0503

244-2
Hose Clamp Plier

Details

for simple self spanning wire hose clamps (e.g. washing machines)
with rotable jaws
clamping range 40 mm
nickel plated
jaws made of high grade tool steel C45 / 1.0503

244-3
Hose Clamp Plier

Details

for spring band clamps e.g. for VW, Audi and Opel
with rotatable jaws
clamping range 6-12 mm
nickel-plated
jaws made of high grade tool steel C45 / 1.0503

244-4
Hose Clamp Plier

Details

for mounting of self spanning, spring strip and space-saving clamp
for clamps Ø 7-60 mm
due to bowden cable operating mechanism (610 mm) suitable for difficult to reach areas
nickel-plated, joint gunmetal-finish
high grade tool steel

244-C
Clic-Hose Clamp Plier

Details

for CLIC-Hose clamps on fuel feed pipes(e.g. VW, Audi, Peugeot)
opening and closing of the hose clamps by turning the Plier 180°
with fix jaws, bent by 90°
span width 20 mm
nickel-plated, joint gunmetal-finish
high grade tool steel

249
Contact File

Details

for cleaning and adjusting of spark plug contacts
Cut 2 second
high grade tool steel C45/1.0503

249-S6
Contact File Set

Details

6 pcs.
for cleaning and adjusting of spark plug contacts
in a plastic storage wallet
Cut 2, second
high grade tool steel C45/1.0503

250FB
File Brush

Details

working area 250 x 40 mm
rugged wooden handle with wear-resistant steel wire spiked band

252
Battery Terminal Brush

Details

with external round brush to clean the cable clamps and internal brush for cleaning battery terminals
packed in plastic box

253
Door Panelling Extraction Plier

Details

for dismounting of the securing clips on door panelling, garnish mouldings and bumpers
nickel-plated, jaws and joint gunmetal-finish
high grade tool steel

257-...
Hacksaw Blades, Flexible wire saw

Details

to use with Hacksaw Frames ELORA-No. 257-...
specially hardened version with eyelets

257-110
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-50
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-55
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-A
Junior Hacksaw Frame

Details

with adjustable wooden handle
for marquetry (Coping) saw blades and rod saw blades with 150 mm length
incl. coping saw blade ELORA-No. 257-S
Hacksaw frame made of steel

257-F
Junior Hacksaw Frame

Details

with fixed red laquered wooden handle
for marquetry (Coping) saw blades and rod saw blades with 150 mm length
incl. coping saw blade ELORA-No. 257-S
Hacksaw frame made of steel

257-PS
Hacksaw Blade Set

Details

in carton box
to use with Hacksaw Frames ELORA-No. 257-...
specially hardened version with eyelets

258...
Thread Restoring File

Details

for the repair of damaged internal and external threads
special steel
for metric-, imperial- and SAE-threads

259-...
Mounting Drift Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

260-...
Flat Chisel, flat oval

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6453

260-S5
Chisel Set

Details

5 pcs.
in black plastic rolling pouch
completely hardened and tempered
striking heads inductive tempered
working edges ground and oiled
shafts black lacquered
ELORA-Chrome-Vanadium 59CrV / 1.2242
according to DIN 6453

show more show less

2601-...
Torque Multiplier

Details

planetary gear (1-, 2- or 3-stepped)
specially hardened gear wheels
permanent internal greasing
sliding bearings on drive side and power take-off side
overload protection (one additional sun wheel with overload cutout is included)
exchangeable drive heads
matt chrome-plated /phosphated surfaces
bi-directional actuation
highest torque, high accuracy better than +-5% tolerance
attention, only for static actuation
in waterproof case

show more show less

261-...
Cape Chisel, flat oval

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6453

262-...
Flat Chisel, octagonal

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

263-...
Cross-Cut Chisel, octagonal

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

264-...
Drift Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

264K
Drift Punch Set

Details

6 pcs.
in metal box
completely hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

show more show less

265-...
Centre Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 7250

266K
Chisel and Punch Set

Details

6 pcs.
in metal box
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

OMS-15L
Empty Module

Details

empty module for OMS-15
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

270
Battery Tester

Details

for diagnostics of the charging system and the voltage status of car and motorcycle batteries
measuring range 6 and 12 Volt up to 1000 CCA
easy to read scale, for up to 100 Ampere

270-S8
Pin Punch Set

Details

8 pcs.
in black metal box
with movable guide sleeve
ELORA-No. 250-59 with fix guide sleeve
fine ground and polished
shaft knurled
driving point made of 115CrV3 / 1.2210, 55-59 HRC

271-...
Parallel Pin Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

271K
Parallel Pin Punch Set

Details

6 pcs.
in metal box
completely inductive hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

show more show less

272-...
Three Square Hollow Ground Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat-treated steel

273-...
Bearing Scraper or Hollow Ground Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat-treated steel

274-...
Three Square Hollow Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat treated steel
DIN 8350, shape C

276-...
Hollow Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat treated steel
DIN 8350, shape A

277
Battery Acid Tester

Details

for testing the acid density on conventional batteries with screw caps
with areometer

280-...
Suction Lifter

Details

for lifting and carrying material with plain, gas-tight surfaces
suction mechanism with security locking
acid- and oil resistant
ELORA-No. 280-40: one suction cup
ELORA-No. 280-80: two suction cups
plastic housing, suction cups made of rubber

280G
Suction lifter with Flexible Heads

Details

Especially suitable for car glass and domed surfaces
suction mechanism with security locking
acid- and oil resistant
plastic housing, suction cups made of rubber

283HS
Hand Guard

Details

hand protection against impacts
no rolling away due to octagonal shape
suitable for all ELORA chisels, except ELORA-No. 361
flat oval 20 x 12, 23 x 13, 26 x 13 mm
octagonal 16, 18, 20 mm
made from impact resistant special rubber

284-250
Berlin Pattern Tin Snip

Details

for long straight cuts
blades additionally inductive hardened and ground, 56-58 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

285 S8/285 S10
Wad Punch Sets

Details

8 and 10 pcs.
in black plastic wallet
for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
lightly conical inside for easy removal of the cuttings
high grade steel
according to DIN 7200, Form A

show more show less

285-...
Wad Punch

Details

for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
lightly conical inside for easy removal of the cuttings
high grade steel
according to DIN 7200, Form A

286-...
Belt Punch

Details

for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
high grade steel
according to DIN 7200, Form B

287
Battery Acid Filler

Details

for filling conventional batteries with screw caps
with rubber ball and PVC tube
acid-resistant

288-...
Bolt Cutter

Details

inductive hardened jaws on the cutter head
cutting capacity up to 48 HRC hardness
easy and precise readjusting with double eccentric screws
limbs made of steel tube with plastic handles
jaws made of special high grade tool steel
according to DIN ISO 9242

289-...
Steel Wire Mesh Cutter

Details

inductive hardened jaws on the cutter head
head angled at 75°
easy and precise readjusting with double eccentric screws
according to DIN 5743
limbs made of steel tube with plastic handles
jaws made of special high grade tool steel

290-1
Door Panelling Extraction Tool

Details

for dismounting of the securing clips
jaw open 6 mm
zinc-plated, black plastic handles
high grade tool steel
matt chrome-plated

290...
Seal Flat scraper

Details

ground work surfaces
non-slip QUATROLIT-2C-handle
heat treated steel

291-...
Claw

Details

for gripping small parts in hard to reach places
with flexible shaft, Ø 7mm
steel stem, operating piece made of plastic

292
File for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
rough milled
2-C-handle
Tool steel 140Cr3/1.2008

292-1
File for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
4-sides rough milled
2-C-handle
Tool steel 140Cr3/1.2008

293
Brush for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
narrow, bent pattern
plastic handle
bristles made of corrugated steel wire

293BS
Brush for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
narrow pattern, width 12 mm
bristles made of straight steel wire
2C-handle

294
Anti-Freeze Tester

Details

for quick and accurate testing of the freezing point temperature of the coolant liquid at any outside temperature
with 360° rotatable twin measuring element
aspirate ball made of elastomer, stays elastic and full functional at any outside temperature
hydrostatic block automatically avoids any leakage or reflow of air
made of robust technical plastics

295
Inspection Mirror

Details

for inspecting hard to see locations
round mirror with metal frame
with flexible shaft
shaft made of steel
2-C QUATROLIT handle with hanging hole

298
Inspection Set with Quick Change Chuck

Details

5-pieces set
Telescopic shaft with quick change chuck for holding mirror, magnifying glass or magnets
packed in a sturdy plastic case

5260-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5130-ST
Electronic Positioning Tweezers

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

3000-IS...
Screwdriver Bits 1/4"

Details

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, DIN ISO 1173
according to DIN ISO 2351-1

3010-IN...
Screwdriver Bits 1/4"

Details

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173
according to DIN ISO 2351-3

302
Brake Piston Reset Tool

Details

for resetting the pistons in brake disc callipers without screw thread reset adjuster
suitable for all common types of vehicles
nickel-plated, jaws gunmetal-finish
high grade tool steel C45 / 1.0503