ELORA

374-2
Flat Nose Plier, angled pattern

Details

extra-long for difficult to access areas
grooved gripping surfaces
ground, with dip insulated, black handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

5000N
Pneumatic Impact Wrench 1/2", 1850 Nm

Details

extremely powerful and ultra light
max. torque 1850 Nm at just 2 kg weight
with vibration-damped composite housing
non-slip cold insulated handle
exhaust air guided through handle
always full capacity when loosening
clockwise- 3-step torque regulation when tightening
clockwise/counter clockwise performance regulation protected in rear motor plate
with high-performance twin-hammer clutch system
air inlet thread 1/4‘‘
operating pressure 6,3 bar
Maximum loosening 1850 Nm
max. sound level 85 dB (A) Lp A
average air consumption 161 l/min
recommended hose inner-Ø 8 mm
vibration acceleration 6,5 m/s²
including steel nipple

show more show less

770-LE1K
Reversible Ratchet 1/2"

Details

for reversible ratchet with safety locking mechanism: ELORA-No. 770-L1K

5320-ST
Universal Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

100-KH 9
Double Open Ended Spanner Set

Details

in black plastic holder
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100A-...
Double Open Ended Spanner, inch

Details

matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100M-...
Double Open Ended Spanner, metric

Details

matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100S-...AF
Double Open Ended Spanner Sets, inch

Details

carton boxed packed
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100S-...M
Double Open Ended Spanner Sets, metric

Details

carton boxed packed
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100S...AFSB
Double Open Ended Spanner Sets, inch

Details

in plastic rolling pouch
with suspension eye
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100S...MSB
Double Open Ended Spanner Sets, metric

Details

in plastic rolling pouch
with suspension eye
matt chrome plated, heads ground
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3110, ISO 3318, ISO 1085, ISO 10102

100SH
Holder for Double Open Ended Spanner Set

Details

for double open-ended spanner sets of 8 pcs. ELORA-No.100, for fitting on tool boards and in tool cabinets
solid black plastic

138-A
Siphon or Connector Plier

Details

loosening and tightening of pipe connections with round union nuts from Ø 25 mm
loosening and tightening of ring lock connectors (like Canon connectors)
drop forged, with slip on joint, 4 adjusting positions
jaw width 10 mm
with screwed plastic jaws
chrome-plated, PVC-dip insulated handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

1080, 1081, 1082
Universal Cable Knife

Details

1080-1081: for wire of 4-28 mm Ø
1082: for wire of 8-28 mm Ø
for precise, quick and safe stripping of all kind of round wires, round and length cut in one operation
blade with transparent plastic safety cover
hardened special purpose steel blade, black plastic handle

1083
Round Wire Stripper

Details

for round wire of 8-13 mm Ø (e.g. NYM 3 x 1,5 mm² up to 5x2,5 mm²)
for flush cutting-off even in difficult to access areas like for example distribution boxes
automatic adjustment of the cutting depth
hardened special purpose steel blades, black plastic handle

1094
Automatic Wire Stripper

Details

for wire diameter 0,2-6,0 mm²
automatic adjustment to wire diameter
with length stop for stripping length from 5-12 mm
integrated side cutter for wire up to Ø 2,0 mm
blades made of hardened special steel
black plastic handles

1095
Wire Stripper

Details

for wire cross section 0,5-6,0 mm²
for automatic stripping of inner conductors
with scale for stripping length from 5-12 mm
integrated side cutter
blades made of hardened special steel
black plastic handles

1100-L
Tool Cabinet, large Model

Details

2 doors, with 2 drawers
lockable with cylinder lock
powder coated, ELORA-yellow (RAL 1006), doors black (RAL 9005)
stable steel sheet version

110A-...
Double-Ended Ring Spanner, inch

Details

deep cranked, with thin-walled heads
matt chrome plated
break resistance and shatterproof quality minimize risk of injury
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 838, ISO 3318, ISO 1085, ISO 10104

110M-...
Double-Ended Ring Spanner, metric

Details

deep cranked, with thin-walled heads
matt chrome plated
break resistance and shatterproof quality minimize risk of injury
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 838, ISO 3318, ISO 1085, ISO 10104

110S...AF
Double-Ended Ring Spanner-Sets, inch

Details

carton box packed
deep cranked, with thin-walled heads
matt chrome plated
break resistance and shatterproof quality minimize risk of injury
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 838, ISO 3318, ISO 1085, ISO 10104

110S...AFSB
Double-Ended Ring Spanner-Sets, inch

Details

in plastic rolling pouch
with suspension eye
deep cranked, with thin-walled heads
matt chrome plated
break resistance and shatterproof quality minimize risk of injury
ELORA-Chrome-Vanadium 31 CrV 3, Code No. 1.2208
DIN 838/ISO 3318

110S...M
Double-Ended Ring Spanner Sets, metric

Details

carton box packed
deep cranked, with thin-walled heads
matt chrome plated
break resistance and shatterproof quality minimize risk of injury
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 838, ISO 3318, ISO 1085, ISO 10104

110S...MSB
Double-Ended Ring Spanner-Sets, metric

Details

in plastic rolling pouch
with suspension eye
deep cranked, with thin-walled heads
matt chrome plated
break resistance and shatterproof quality minimize risk of injury
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 838, ISO 3318, ISO 1085, ISO 10104

1110-..., 1220-...
Accessories Roller Tool Cabinet

Details

for use at back and side panels of roller the tool cabinets ELORA-No. 1220-L7, 1220-L, 1811-L and 1200-L
at the side and rear panel of the roller tool cabinet accessories can be mounted by using the Euro-perforation 10 x 38 mm (square 10 x 10 mm, hole centre to hole centre 38 x 38 mm)
plastic holder

1115
Glow Plug Ratchet

Details

for mounting and dismounting of glow plugs in constricted room
curved pattern, reversible
matt chrome-plated, polished
special steel

112A-...
Double-Ended Ring Spanner, inch

Details

short version
deep cranked
thin-walled heads
chrome plated, polished
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

112M-...
Double-Ended Ring Spanner, metric

Details

short version
deep cranked
thin-walled heads
chrome plated, polished
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

112S...AF
Double-Ended Ring Spanner-Sets, inch

Details

in plastic pouch
with suspension eye
short version
deep cranked
thin-walled heads
chrome plated, polished
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

112S...M
Double-Ended Ring Spanner-Set, metric

Details

in plastic pouch
with suspension eye
short version
deep cranked
thin-walled heads
chrome plated, polished
Chrome-Vanadium 31 CrV 3 / 1.2208

113BA-...
Double-Ended Ring Spanner

Details

extra short version
deep cranked
6x4 BA = hexagon, all others bi-hexagon
chrome plated, polished
ELORA-Chrome-Vanadium 31 CrV 3, Code-No. 1.2208

113M-...
Double-Ended Ring Spanner, metric

Details

extra short version
deep cranked
4x4,5 mm = hexagon, all others bi-hexagon
chrome plated, polished
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

113S...BA
Double-Ended Ring Spanner-Set

Details

in plastic pouch
with suspension eye
extra short hexagon-series
deep cranked
chrome plated, polished
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

113S...M
Double-Ended Ring Spanner-Sets, metric

Details

in plastic pouch
with suspension eye
extra short hexagon-series
deep cranked
chrome plated, polished
Chrome-Vanadium 31 CrV 3 / 1.2208

115-...
Ratchet Ring Spanner, straight

Details

straight pattern
chrome plated, polished
special steel

115G-...
Ratchet Ring Spanner, bent

Details

bent, reversible
reversible
chrome plated, polished
special steel

117-...
Ring Ratchet-Spanner, hinged

Details

for awkward areas with limited access for hydraulic-, pneumatic and other bolted connections within a conduit system
smallest swivel angle 30°
chrome-plated, head gunmetal finished
special steel

117S...
Ring Ratchet-Spanner-Sets, hinged

Details

carton box packed
for awkward areas with limited access for hydraulic-, pneumatic and other bolted connections within a conduit system
smallest swivel angle 30°
chrome-plated, head gunmetal finished
special steel

118-.../118S4
Adaptor for Ring Ratchet Spanner

Details

with button for quick release and change of tools
chrome-plated, polished
Chrome -Vanadium 31CrV3 / 1.2208

119TXE-...
Double-Ended Ring Spanner for outside TORX®-screws

Details

straight pattern
chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

120-...
Double-Ended Ring Spanner, straight, metric

Details

flat and straight pattern
thin-walled heads
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
Ausführung nach DIN 837, Form B, ISO 3318, ISO 1085

1200-RM 18
Anti Slip Mat

Details

for drawers in tool cabinets and work benches
Length: 2m

120S-...
Double-Ended Ring Spanner Sets, straight, metric

Details

carton box packed
flat and straight pattern
thin-walled heads
matt chrome plated
Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 837, Form B, ISO 3318, ISO 1085

121-...
Open Ring Spanner, metric

Details

for flare nuts e.g. at gasoline or hydraulic pipes
open rings are 15° bent
ring opening set at 30°
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3118

1210-...
Accessories Roller Tool Cabinet Buddy

Details

for ELORA roller tool cabinet Buddy; ELORA-No. 1210-LOT
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
the wooden panel ELORA No. 1210-PL fits exactly onto the ABS-storage shelf and make it a plane working surface

1210-ET...
Drawer Seperator for Roller Tool Cabinet Buddy

Details

for division of the drawers
metal sheet

1210-L7
Roller Tool Cabinet Buddy

Details

7 drawers
solid metal sheet pattern, corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 5 storage compartments for small parts and rim on all sides
solid handlebar, mounting possible on both sides
up to 6 different accessories mountable in the recessed side wall e.g. storage foldable tray for small parts ELORA No. 1210-ES, screwdriver tray for 8 screwdrivers ELORA No. 1210-SD
2 can holder are included
central locking system with 2 keys
loading capacity of each drawer 20 kg respectively 30 kg for the two lower drawers
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 570 x D 410 mm
drawers ELORA black powder-coated
can be Individually equipped with ELORA OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running casters, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS

show more show less

1212
Mechanics Foam Mat

Details

high comfort due to high foam quality
carrying and hanging handle
washable
oil and water-resistant
made of XPE foam material, black and yellow
dimensions: 210 x 450 x 30 mm

121A-...
Open Ring Spanner, inch

Details

for flare nuts e.g. at gasoline or hydraulic pipes
open ring are 15° bent
ring opening set at 30°
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3118

121S8M
Open Ring Spanner Set

Details

carton box packed
for flare nuts e.g. at gasoline or hydraulic pipes
open rings are 15° bent
ring opening set at 30°
up to 13×14 mm = hex. pattern, all other: bi-hex. pattern
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3118

show more show less

1220-L7
Roller Tool Cabinet Super Caddy, 7 drawers

Details

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 7 storage compartments for small parts and rim on all sides
200 kg shelf load capacity due to strengthened top cover
solid handlebar, mounting possible on both sides
sides and back panel with Euro-Perforation 10 x 38 mm (hole square 10 x 10 mm, hole centre-hole centre 38 x38 mm) for mounting accessory hooks, rays, waste basket, can holder, paper roll holder, cable drum
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 40 kg
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
can be individually divided with separators or equipped with ELORA-OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
dividers for drawers separately available
delivery without tools and accessories
suitable assortments: WS and OMS
other drawer types and special colours on request

show more show less

1220-TBS..., 1220-FTS...
Separating Plates

Details

drawer division for ELORA-Super Caddy, ELORA-No. 1220-L7, 1220-L8 and ELORA ToolJET, ELORA-No. 1225-L7 and mobile work bench, ELORA-No. 1820-LOT
for division of the drawers
zinc-plated metal sheet

1227-L
Workshop cabinet

Details

completely welded steel sheet construction
2 doors, with 4 height-adjustable shelves
load capacity 50 kg per shelve
doors strengthened and 3-point safety lock
rotary handle with cylinder lock
powder coated, ELORA-yellow (RAL 1006) doors black (RAL 9005)

122A-...
Obstruction Ring Spanner, inch

Details

especially suitable for work on engines e.g. bolts on alternator, carburetor and starter
with thin-walled rings
matt chrome plated
ELORA-Chrom-Vanadium 31 CrV 3 / 1.2208
according to ISO 3318

122M-...
Obstruction Ring Spanner, metric

Details

especially suitable for work on engines e.g. bolts on alternator, carburator and starter
with thin-walled rings
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to ISO 3318

123M-...
Double End Swivel Socket Wrench

Details

thin-walled heads with large swivel range
matt chrome plated
heads polished
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

1382-L1
Plastic Tool Case

Details

organisers for small parts integrated in the lid
removeable tool tray
solid single hand handle
Polypropylene

130BI-240
Waterpump Plier

Details

lay-on slip joint and teeth cut-out
tooth inductive hardened, trap protection
chrome plated, polished, dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN ISO 8976, Form A

132-...
Waterpump Pliers

Details

box joint
self-locking due to gripping surfaces staggered in reverse order
teeth inductive hardened, trap protection
adjustable in 6 positions
blue laquered, polished jaws
handles with forged riffle
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN ISO 8976, Form C

show more show less

132-S3
Waterpump Plier Assortment

Details

3 pcs.
carton box packed
box joint
self-locking due to gripping surfaces staggered in reverse order
teeth inductive hardened, trap protection
ELORA-No. 132-190 adjustable in 6 positions, all others adjustable in 7 positions
blue laquered, polished jaws
handles with forged riffle
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN ISO 8976, Form C

show more show less

133-250
Quick Gripping Waterpump Plier

Details

quick adjustment by press a button
box joint
absolute safe, no displacement during work
self-locking due to gripping surfaces staggered in reverse order
Teeth inductive hardened, trap protection
chrome-plated, polished jaw
ELORA Chrome-Vanadium 31 CrV3 /1.2208
acc. to DIN ISO 8976 Form B

show more show less

1344-...
Half Round Rasp

Details

rasp cut on two sides
tapered
2-component handle
according to DIN 7263, shape C

1345-...
Rectangular Rasp

Details

Cut on 3 sides
tapered
2-component handle
according to DIN 7263, shape A

1346-...
Round Rasp

Details

with circumferential rasp cut
tapered towards the tip
2-component handle
according to DIN 7263, shape E

1347-S160
Needle File Set

Details

6-pcs. second cut file set (cut 2)
in plastic pouch

1359-S...
Countersinks 90°, HSS

Details

6-pcs.
in plastic folding box
for countersinking and deburring
with cylindrical shaft and 3 flutes
DIN 335 C

136-...
Quick Action Pipe Wrenches

Details

easy and quick adjusting due to knurled adjustment
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
high grade tool steel

1360 S
Thread Cutting Assortment, HSS

Details

15 pcs.
in plastic case
for cutting internal threads from M3 to M12
consisting of bottoming tap, adjustable tap wrench and countersink
according to DIN 352

1361-S...
Set of Twist Drills, HSS-G

Details

ELORA No. 1361-S19: 19 pcs.
ELORA No. 1361-S25: 25 pcs.
rising by 0,5 mm
in plastic folding box
high capacity twist drill bits, completely ground
for steel, cast steel, alloyed and non-alloyed (up to 900 N/mm²)
high true-running accuracy
from Ø 3 mm split point according to DIN 1412 C
point angle 118°
according to DIN 338 Type N

show more show less

1362-S...
Set of Twist Drills HSS-G

Details

ELORA No. 1362-S19: 19 pcs.
ELORA No. 1362-S25: 25 pcs.
rising by 0,5 mm
in plastic folding box
high capacity twist drill bits, completely ground
5 % Cobalt content provides additional strngth and wear resistance
for steel, cast steel, alloyed and non-alloyed (up to 900 N/mm²), hot and cold work steel, heat-treated and case-hardened steel as well as stainless and acid-resistant steel
high true-running accuracy
from Ø 3 mm split point according to DIN 1412 C
point angle 130°
according to DIN 338 Type N

show more show less

1363-S
Thread Cutting Assortment, HSS

Details

51 pcs.
in plastic case with hard foam insert
for cutting internal and external threads M3 to M12
consisting of hand taps (3 steps), tap wrench, countersink, circular dies, die holder and thread gauge
according to DIN 352

1363-SF
Thread Cutting Assortment, Fine Thread, HSS

Details

44 pcs.
in plastic case with hard foam insert
for cutting internal and external threads Mf3 to Mf12
Consisting of hand taps (2 steps), tap wrench, countersink, circular dies, die holder, guideways and thread gauge
according to DIN 352

1364-S
Thread Repairing Assortment

Details

in plastic case with hard foam insert
for repairing threads from M5x0,8, M6x1, M8x1,25, M10x1,5, M12x1,75

1365-S
Thread Cutting Assortment, HSS

Details

61 pcs.
in plastic case with hard foam insert
for cutting internal and external threads M3 to M20
Consisting of hand taps (3 pcs.), tap wrench, countersink, circular dies, die holder, guideways and thread gauge
according to DIN 352

1365-SF
Thread Cutting Assortment, Fine Thread, HSS

Details

50 pcs.
in plastic case with hard foam insert
for cutting internal and external threads Mf3 to Mf20
Consisting of hand taps (2 steps), tap wrench, countersink, circular dies, die holder, guideways and thread gauge
according to DIN 352

137
Plumbing Wrench

Details

for chrome and nickel plated bathroom fittings
with lever clamp
with exchangeable plastic jaws, 8mm wide
gunmetal-finished
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

138
Siphon or Connector Plier

Details

loosening and tightening of pipe connections with round union nuts from Ø 25 mm
loosening and tightening of ring lock connectors (like Canon connectors)
drop forged, with slip on joint, 4 adjusting positions
serrated jaws, jaw width 10 mm
chrome-plated, PVC-dip insulated handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

1380-L
Hard Protective Case

Details

variable dividable floor shell
removable cover board with 15 tool pockets
removable tool board with 22 tool pockets on the front and back
document compartment in the lid (A4 format)
2 lockable clip locks made of metal
hinge cover
robust aluminium frame with protection for the sharp edges
trolley case made of dent proof black ABS material
delivery without tools!

show more show less

1381-L
Hard Protective Trolley Case

Details

mobile case with telescopic handle and 2 free running rollers
variable dividable floor shell
removable cover board with 15 tool pockets
removable tool board with 23 tool pockets on the front and back
document compartment in the lid (A4 format)
2 lockable clip locks made of metal and additional combination lock
hinge cover
robust aluminium frame with protection for the sharp edges
trolley case made of dent proof black ABS material
delivery without tools!

show more show less

1385-L
Installation Tool Bag

Details

robust tool bag with moisture repellent bottom
solid metal handle with padded grip
removable cover and padded carrying strap
outside 5 compartments with hook and loop fastener, fixation for water level
inside 10 pockets and 8 hangers
made of tear-proofed durable nylon
delivery without tools!

1386-L
Technicians Notebook Tool Bag

Details

padded lap-top compartment (17") and additional document compartment (A4 format)
removable tool board with 8 pockets on the front and 2 rows elastic hangers on the back
2 small and 5 big pockets on the inside
key ring holder
front side 90 ° foldable
on each side big attached pocket with hook and loop fastener
splash proofed bottom
adjustable strap with shoulder cushion quick fastener
handle double fixable
made of tear-proofed nylon
delivery without tools and accessories!

show more show less

139
Spud Wrench

Details

for the assembly of valve nipples in heating units for 3/8", 1/2", 3/4", 1" and 4 intermediate steps
with 1/2" square drive, chrome plated
high grade tool steel

870-E1ZI
Repair Kit 3/8"

Details

for the Push Trough Ratchet 870-1ZI

1400-I...
Socket Sets 1/4"

Details

MU=21 pcs., AU=20 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

1400-TXE
Socket Set 1/4"

Details

16-pcs.
suitable for inside- and outside TORX® screws
in black metal storage case with OMS-hard foam insert
female square according to DIN 3120-C, 6,3, ISO 1174, with ball retaining groove
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

5260-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

1430-...
Socket Sets 1/4"

Details

MU=16 pcs., AU=14 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

1430-TXEU/TTXEU
Socket Sets 1/4"

Details

21 pcs.
suitable for inside- and outside TORX®screws
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

1430-TXU/TTXU
Socket Sets 1/4"

Details

14 pcs.
suitable for inside TORX®screws
in black metal storage case with plastic insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

1440-...
Socket Sets 1/4"

Details

MU=30 pcs., AU=31 pcs.
in black metal storage case with OMS-hard foam insert
square drive according to DIN 3120, ISO 1174
operation tools according to DIN 3122, ISO 3315

1450-...
Extension Bars 1/4"

Details

matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball locking device resp. with ball retaining groove
according to DIN 3123, ISO 3316

1450-13-15
Socket Converter 1/4"

Details

matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball locking device resp. with ball retaining groove
according to DIN 3123, ISO 3316

1450-16
Bit Holder 1/4"

Details

matt chrome plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female hexagon according to DIN 3126-D 6,3, with bit retaining spring
female square according to DIN 3120-C 6,3, ISO 1174, with ball retaining groove

1450-1D
Reversible Ratchet 1/4"

Details

with small, slim head
gear wheel with safety locking and quick release button
smallest possible swivel angle 5°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

1450-1UN
Reversible Ratchet 1/4"

Details

with small, round head
forged, fine teethed wheel with grippy metal switching disk
smallest possible swivel angle 5°
nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

1450-2V
Coupler Square

Details

for push through ratchet ELORA-No. 1450-2ZI and for coupling sockets to the female square drive of reversible ratchet ELORA-No. 1450-1D

1450-2ZI
Push Through Ratchet 1/4

Details

extremely rugged ratchet with round head
forged gear wheel with push through square coupler
smallest possible swivel angle 18°
nonslip QUATROLIT®-2C-handle
matt chrome-plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

1450-3
Spinner Handle 1/4"

Details

nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

1450-4
Sliding T-Bar 1/4"

Details

matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square according to DIN 3120- A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

1450-6
Flexible Extension Bar 1/4"

Details

matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120, ISO 1174, with ball locking device resp. with ball retaining groove

Brand

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h