ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png premium quality tools Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719
  • for TORX Plus®IPR-screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • external hexagon according to DIN 3126 C 6,3, ISO 1173
  • TORX Plus®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX®screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 C 6,3, ISO 1173
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside-TORX®safety screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 C 6,3, ISO 1173
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • 10 pcs.
  • for extracting ball-bearings, ball-bearingrings and bushinger with a bore diameter of Ø 10–75 mm
  • high grade tool steel
  • in black plastic box with plastic foam insert
  • to split fixed or overtightened nuts to strength class 6
  • zinc plated, inductive hardened chisel edge
  • Heat-treated steel
  • for plain slotted screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
  • according to DIN ISO 2351-1
  • for inside hexagon screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
  • according to DIN ISO 2351-3
  • for cross slotted screws PH
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
  • for cross slotted screws PZ
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 C 8, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
  • for inside multi-point B &S and XZN screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
  • 15 pcs. for following applications:
  • Variant 1 for V-belt pulleys with threaded holes
  • 1 short beam for V-belt pulleys Ø 43-120 mm
  • 1 long beam for V-belt pulley Ø 95-210 mm
  • 3 exchangeable push-pieces to use as spindle extension
  • Variant 2 for V-belt pulley without threaded holes
show more show less
  • to split fixed or overtightened nuts up to strength class 10
  • Hydraulic execution
  • gunmetal finished spindle
  • High grade tool steel C45 / 1.0503
  • for inside TORX®screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3128 C 8, DIN ISO 1173
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • to split fixed or overtightened nuts up to strength class 10
  • hyraulic execution
  • high grade tool steel C45 / 1.0503
  • for pulling off ball bearings, gear-wheels, discs, etc.
  • heavy-duty, forged pattern
  • 2 arms
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for inside-TORX®safety screws
  • ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • 5 pcs.
  • carton box packed
  • suitable for works on panelling, dash board and garnish mouldings
  • special plastic POM, black
  • for pulling off ball bearings, gear-wheels, v-belt pullers etc.
  • 3 arms, with double-sided useable hook ends
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for highest operational demands
  • inductive hardened cutting blades
  • cutting blades hardness 61-63 HRC
  • gunmetal-finish, ground head
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 9243 Form A
  • for pulling off ball bearings at difficult to reach areas
  • with particularly narrow hooks
  • automatical fitting of the hooks due to scissor effect
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for gentle removing of ball joint pivots on steering tie rods and stabilizers
  • suitable for difficult to reach areas
  • zinc-plated, gunmetal-finish
  • high grade tool steel
  • for pulling off ball and roller bearings and close-fitting components
  • zinc-plated, spindles gunmetal-finish
  • high grade tool steel
  • containing one puller, one separator and one set of drawbar extensions
  • zinc-plated, spindle gunmetal-finish
  • in black plastic box with plastic foam insert
  • heavy-duty, forged pattern
  • 3 arms
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • heavy duty, forged pattern
  • 3 arms with very narrow forged hooks
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle and hook ends gunmetal-finish
  • high grade tool steel
  • for gentle removing of ball joint pivots on steering tie rods and stabilizers
  • zinc-plated
  • high grade tool steel
  • for removing connecting rods, ball rods, drop arms etc.
  • massive forged pattern
  • handle knurled
  • zinc-plated
  • high grade tool steel
  • with steel tube handle
  • coated
  • bit lock with permanent magnet
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female hexagon drive according to DIN 3126 D 6,3, DIN ISO 1173
  • 36 pcs.
  • in black yellow plastic box with belt clip and suspension hole
  • magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3
  • bits made of ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • 35 bits with male hexagon drive according to DIN 3126 C 6,3
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • for extracting broken screws and bolts with right-hand thread
  • chrome vanadium 58CrV4 / 1.8161
  • in black plastic box
  • for extracting broken screws and bolts with right-hand thread
  • chrome vanadium 58CrV4 / 1.8161
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
  • for car body work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • hand protection against impacts
  • no rolling away due to octagonal shape
  • only for ELORA-No. 361
  • made of impact resistant special rubber
  • for stone work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 7254 Form A
  • for stone work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • according to DIN 7256
  • for stone work
  • completely hardened and tempered
  • striking head inductive tempered
  • working edge sharpened and oiled
  • shaft black coated
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • serrated gripping surface and side cutter
  • maximum stability under load of the blades by inductive hardening
  • ground, with red dip insulated handles
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • 45° bent, serrated gripping surface and side cutter
  • maximum stability under load of the blades by inductive hardening
  • ground, with red dip insulated handles
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • for extracting close-fitting ball-bearings over the inner bearing ring
  • to use with counter support ELORA-No. 373
  • gunmetal-finish
  • high grade tool steel
  • 9 pcs.
  • for extracting ball-bearings, ball-bearingrings and bushinger with a bore diameter of Ø 10–75 mm
  • high grade tool steel
  • in black plastic box with plastic foam insert
  • counter support for internal extractor ELORA-No. 372
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for holding and bending
  • long, flat jaws, rippled serrated surface
  • ground, with red dip insulated handles
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • long jaws, serrated gripping surface
  • ground, with red dip insulated handles
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • for internal retaining rings acc. to DIN 472, DIN 984
  • straight jaws
  • gunmetal-finish, ground joint
  • red dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 5256 Form C
  • for internal retaining rings acc. to DIN 472, DIN 984
  • jaws bent at 90°
  • gunmetal-finish, ground joint
  • red dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 5256 Form D
  • for external retaining rings acc. to DIN 471, DIN 983
  • straight jaws, self-opening due to mounted spiral spring
  • gunmetal-finish, ground joint
  • red dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 5254 Form A
  • for external retaining rings acc. to DIN 471, DIN 983
  • jaws bent at 90°, self-opening due to mounted spiral spring
  • gunmetal-finish, ground joint
  • red dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 5254 Form B
  • high-quality industrial design with short stroke
  • continuous fixation, air release valve on the pump head
  • fat lead by means of spring force in the press head
  • dummy lubrication excluded
  • Working pressure 400 bar, test pressure 800 bar, capacity about 1.9 cc / stroke
  • filling can be done with bulk grease (500cc) or cartridge (400g)
show more show less
  • high cutting performance with minimal effort
  • maximum stability under load by inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
  • ground, with red dip insulated handles
  • ELORA-high grade tool steel C60 / 1.0601
  • according to DIN ISO 5749
  • oval head
  • maximum stability under load by inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
  • ground, with red dip insulated handles
  • ELORA-high grade tool steel C60 / 1.0601
  • according to DIN ISO 5749
  • strong edition for tough conditions
  • maximum stability under load of the blades by inductive hardening
  • cutting edge hardness: 63-64 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
  • serrated gripping surface and burner hole
  • ground, with red dip insulated handles
show more show less
  • for loosening, tightening and cutting of balance weights on rims
  • for setting retaining springs on balance weights
  • with plastic head on the hammer side, especially for painted weights
  • chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • 27 pcs.
  • for driving letters by impact into steel
  • 27 capital letters, from A to Z and ''&''
  • in stable plastic box
  • completely hardened and tempered
  • striking heads inductive tempered
show more show less
  • 9 pcs.
  • for driving numbers by impact into steel
  • 9 numbers from 0-9
  • in stable plastic box
  • completely hardened and tempered
  • striking heads inductive tempered
show more show less
  • 3 pcs.
  • carton box packed
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • 3 pcs.
  • carton box packed
  • chrome-plated, polished
  • 4 pcs.
  • carton box packed
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • 4 pcs.
  • carton box packed
  • chequered handles
  • chrome-plated, polished joint
  • 8 pcs.
  • assortment in convenient plastic case
  • chrome plated, polished joint, chequered handles
  • for all fine gripping and assembly work
  • anti-glare satin finish, grooved gripping surfaces
  • stainless, antimagnetic, acid-proof
  • ELORA-Special-Chrome-Nickel-steel
  • for expanding copper tubes
  • black, made of special steel
  • for plain slotted screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN ISO 2351-1
  • for inside hexagon screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN ISO 2351-3
  • for cross slotted screws PH
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH
  • for cross slotted screws PZ
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ
  • bit lock with permanent magnet resp. spring clips
  • with stainless steel sleeve, diameter 9,5 mm
  • female hexagon drive according to DIN 3126- D 6,3
  • male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
  • according to DIN 7427 Form D
  • for inside TORX®screws
  • ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
  • male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • oval head, lap joint, with double leaf spring
  • with dip insulated PVC handles
  • gunmetal-finished, polished head
  • ELORA-high grade tool steel C60 / 1.0601
  • pointed head, lap joint, with double leaf spring
  • with dip insulated PVC handles
  • gunmetal-finish, polished head
  • ELORA-high grade tool steel C60 / 1.0601
  • for operating the quick-release fasteners
  • for MERCEDES-BENZ, VW-AUDI, FIAT, OPEL, CITROËN, VOLVO, MAN SCANIA, CLAAS
  • AdBlue lines and AdBlue injection nozzle
  • matt chrome plated
  • nonslip QUATROLIT®-2C-handles
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • for fast and efficient closing of connecting tyre levers
  • with moulded plastic grip
  • for cutting in places difficult to access, for work with endangered electronic components
  • pointed, narrow head, small version with fine bevel, maximum stability under load of the cutting edges by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • cutting edge hardness 61-63 HRC
  • ELORA-high grade tool steel C60 / 1.0601
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for all work with electrostatic endangered components
  • pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finished, with 2-C ESD handles, surface resistance 106–109 Ohm
  • F= with fine bevel
  • O= without bevel
  • cutting edge hardness 61-63 HRC
  • ELORA-high grade tool steel C60 / 1.0601
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for all work with electrostatic endangered components
  • oval head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • M= with bevel
  • F= with fine bevel
  • O= without bevel
  • cutting edge hardness 61-63 HRC
show more show less
  • with trapping wire to cut off wire, for all work with electrostatic endangered components
  • oval head with wire trapping spring, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 61-63 HRC
  • ELORA-high grade tool steel C60 / 1.0601
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for all work with electrostatic endangered components
  • pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • M= with bevel
  • F= with fine bevel
  • O= without bevel
  • cutting edge hardness 61-63 HRC
show more show less
  • for all work with electrostatic endangered components
  • oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 61-63 HRC
  • ELORA-high grade tool steel C60 / 1.0601
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for virtually flush cutting of thin, soft wires in places difficult to access, for work with electrostatic endangered components
  • extra narrow head, fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 61-63 HRC
  • ELORA-Chrome-Vanadium 80CrV2 / 1.2235
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for pre-punching and pressing of eyelets 458S-4,5, 458S-5,0, 458S-5,5
  • bright nickel plated, with black ergonomically formed plastic handles
  • high-strength special tool steel
  • for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
  • straight, compact, solid head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • F= with fine bevel
  • O= without bevel
  • cutting edge hardness 61-63 HRC
  • ELORA-high grade tool steel C60 / 1.0601
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
  • wide head, long cutting edges, with fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 61-63 HRC
  • ELORA-high grade tool steel C60 / 1.0601
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • 70% power saving by leverage
  • for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
  • punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
  • bright nickel plated, with black ergonomic formed plastic handles
  • high-strength special tool steel
  • for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
  • punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
  • nickel plated, with black ergonomic formed plastic handles
  • high-strength special tool steel
  • for cutting very hard materials with coincident maximum stability under load, for all work with electrostatic endangered components
  • oval head, with bevel, maximum stability under load due to carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 84-86 HRA
  • ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • straight edition
  • for plugging on and pulling down of deep-seated glow plugs
  • nonslip QUATROLIT®-2C-handles
  • matt chrome plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • for cutting very hard wires which are difficult to access, for all work with electrostatic endangered components
  • pointed, narrow head with groove and fine bevel, small version, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 84-86 HRA
  • ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • hooked jaws
  • for difficult to pull down spark plug sockets
  • matt chrome plated
  • nonslip QUATROLIT®-2C-handles
  • ELORA-high grade tool steel C45 / 1.0503
  • for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
  • straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106-109 Ohm
  • cutting edge hardness 84-86 HRA
  • ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
  • DIN ISO 9654, ESD: DIN IEC 614340-5-1
  • for difficult to access spark plug sockets
  • jaw length 50mm
  • matt chrome plated
  • nonslip QUATROLIT®-2C-handles
  • ELORA-high grade tool steel C45 / 1.0503
  • for fine precision gripping and bending work, for work with electrostatic endangered components
  • short, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • OH = smooth gripping surface
  • MH = serrated gripping surface
  • ELORA-high grade tool steel C45 / 1.0503
  • DIN ISO 9655, ESD: DIN IEC 61340-5-1
  • for pressing of end-sleeves according to DIN 46228 part 1 and 4
  • with side cutter and wire stripping mechanism for soft wire
  • with black plastic handles
  • ELORA-high grade steel C45 / 1.0503
  • for fine precision gripping and bending work, for work with electrostatic endangered components
  • angled, short jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • smooth gripping surface
  • ELORA-high grade tool steel C45 / 1.0503
  • DIN ISO 9655, ESD: DIN IEC 61340-5-1
  • empty module for OMS-16
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for fine precision gripping and bending work, for work with electrostatic endangered components
  • long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • serrated gripping surface
  • ELORA-high grade tool steel C45 / 1.0503
  • DIN ISO 9655, ESD: DIN IEC 61340-5-1
  • for external retaining rings without holes
  • straight jaws, self-opening due to mounted double leaf spring
  • chrome-plated, polished joint, chequered handles
  • ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
  • for fine precision gripping and bending work, for work with electrostatic endangered components
  • angled, straight long jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • serrated gripping surface
  • ELORA-high grade tool steel C45 / 1.0503
  • DIN ISO 9655, ESD: DIN IEC 61340-5-1
  • serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • for fine precision gripping and bending work, for work with electrostatic endangered components
  • very fine, slim, long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 106–109 Ohm
  • smooth gripping surface
  • ELORA-high grade tool steel C45 / 1.0503
  • DIN ISO 9655, ESD: DIN IEC 61340-5-1