ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719

  • for inserting valve spring retainer
  • metal sheet, nickel plated
  • for grinding-in the engine valve seats
  • rubber suction cup on both ends
  • with wooden shaft
  • for left and right hand thread
  • zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
  • high grade tool steel C45 / 1.0503
  • for pre-loading of the piston rings during insertion of the pistons into the cylinder
  • light pattern, continuously adjustable
  • wrench included
  • high-tensile spring band steel C75 / 1.0605
  • for pre-loading of the piston rings during insertion of the pistons into the cylinder
  • heavy pattern, continuously adjustable
  • wrench included
  • high-tensile spring band steel C75 / 1.0605
  • for inserting and removing piston rings
  • nickel-plated, with plastic handles
  • high grade tool steel C45 / 1.0503
  • with prism holder for safe spreading of different piston rings
  • nickel plated
  • prism holder gunmetal-finish
  • high grade tool steel C45 / 1.0503
  • for mounting of self spanning, spring strip and space-saving clamp
  • for clamps Ø 7-60 mm
  • due to bowden cable operating mechanism (610 mm) suitable for difficult to reach areas
  • nickel-plated, joint gunmetal-finish
  • high grade tool steel
  • for CLIC-Hose clamps on fuel feed pipes(e.g. VW, Audi, Peugeot)
  • opening and closing of the hose clamps by turning the Plier 180°
  • with fix jaws, bent by 90°
  • span width 20 mm
  • nickel-plated, joint gunmetal-finish
  • high grade tool steel
  • for simple self spanning wire hose clamps (e.g. washing machines)
  • lockable in 3 positions
  • nickel-plated
  • jaws made of high grade tool steel C45 / 1.0503
  • for simple self spanning wire hose clamps (e.g. washing machines)
  • with rotable jaws
  • clamping range 40 mm
  • nickel plated
  • jaws made of high grade tool steel C45 / 1.0503
  • for spring band clamps e.g. for VW, Audi and Opel
  • with rotatable jaws
  • clamping range 6-12 mm
  • nickel-plated
  • jaws made of high grade tool steel C45 / 1.0503
  • to pinch-off flexible hose lines without metallic tissue, to avoid leakage of fluids, e.g. during exchanging fuel or water of pumps, radiators or similar
  • safe locking due to clamp ring
  • stable plastic
  • extra-long for difficult to access areas
  • grooved gripping surfaces
  • ground, with dip insulated, black handles
  • matt chrome plated
  • ELORA-high grade tool steel C45 / 1.0503
  • 10 mm long probe tip
  • with protection cap
  • cable with alligator clamp
  • for voltage testing from 6-24 V
  • not for use on vehicles with electrical components
  • in a plastic bag
  • for quick and accurate testing of the freezing point temperature of the coolant liquid at any outside temperature
  • with 360° rotatable twin measuring element
  • aspirate ball made of elastomer, stays elastic and full functional at any outside temperature
  • hydrostatic block automatically avoids any leakage or reflow of air
  • made of robust technical plastics
  • 4 pcs.
  • for removing and inserting of O-rings and sealing gaskets
  • QUATROLIT®-2C-handles with suspension hole
  • blade matt chrome-plated
  • Chrome-Vanadium 58CrV4 / 1.8161
  • professional pattern with lightly elevated head piece
  • ergonomic pattern
  • made of high tensile plastic
  • capacity 130 kg
  • 6 swivel castors, Ø 70 mm
  • temperature range: -30 °C - +60 °C
  • dimensions creeper: H 115 x L 1030 x D 480 mm
  • professional finish
  • can be converted from creeper to seat
  • bolstered seating and lying area
  • stable steel tube frame
  • load capacity: 136,00 kg
  • measurements creeper seat: H 145 x L 1025 x T 410 mm
show more show less
  • for removing oil filters and clamping of round shaped parts
  • max. parts diameter 160 mm
  • non-slip fibre ribbon, width 22 mm
  • plastic coated grip
  • high grade tool steel
  • for removing oil filters and clamping of round shaped parts
  • especially appropriate for trucks, construction and agriculture machinery
  • max. parts diameter 180 mm
  • non-slip fibre ribbon, width 50 mm
  • with 1/2" female square drive
  • high grade tool steel
  • for removing oil filters and clamping of round shaped parts
  • especially appropriate for trucks, construction and agriculture machinery
  • max. parts diameter 280 mm
  • non-slip fibre ribbon, width 25 mm
  • drop forged pattern
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • for all common oil-, fuel filter and round couplings
  • parts diameter 50-100 mm
  • 32 chain links
  • matt chrome-plated, black chain
  • gunmetal finished
  • 1-2''-female square drive according to DIN 3120
  • for loosening and tightening of oil female square drive screws
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • for all common oil-, fuel filter and round couplings
  • with adjustable steel band
  • plastic coated grip
  • nickel-plated
  • suitable for oil filters in difficult to access areas
  • 3 arms, for clockwise and counter-clockwise tightening
  • female square drive according to DIN 3120-C 10, ISO 1174
  • with adapter to female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • external hexagon 21 mm
  • chrome-plated, adapter gunmetal-finish
  • high grade tool steel
  • for loosening of air filters
  • 3 arms
  • black coated
  • high grade tool steel
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • especially appropriate for Caterpillar vehicles
  • slot width 11 mm
  • female square drive according to DIN 3120-C 12,5, ISO 1174 with ball retaining groove
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • straight edition
  • for plugging on and pulling down of deep-seated glow plugs
  • nonslip QUATROLIT®-2C-handles
  • matt chrome plated
  • ELORA-high grade tool steel C45 / 1.0503
  • hooked jaws
  • for difficult to pull down spark plug sockets
  • matt chrome plated
  • nonslip QUATROLIT®-2C-handles
  • ELORA-high grade tool steel C45 / 1.0503
  • for difficult to access spark plug sockets
  • jaw length 50mm
  • matt chrome plated
  • nonslip QUATROLIT®-2C-handles
  • ELORA-high grade tool steel C45 / 1.0503
  • for mounting and dismounting of glow plugs in constricted room
  • curved pattern, reversible
  • matt chrome-plated, polished
  • special steel
  • for spark plugs of size 16 mm (5/8" AF)
  • to operate with tommy bar ELORA-No. 229D
  • female square drive according to DIN 3120-C 10, ISO 1174 respectively DIN 3120-C 12,5, ISO, with ball retaining groove
  • made of seamless precision tube
  • hardened, matt chrome-plated
  • high grade tool steel C45/1.0503
  • tommy bars are not included
  • to operate with tommy bar ELORA-No. 229D
  • with rubber insert 20,8 mm
  • hollow shaft made of seamless tube
  • hardened
  • matt chrome-plated
  • high grade tool steel C45/1.0503
  • tommy bars are not included
  • for tubular spark plug wrench ELORA-No. 218, 219, 220
  • hardened, matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • pattern with swivelling actuating bracket
  • hardened, chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • extra deep, with rubber insert
  • chrome-plated, polished
  • knurled
  • female square drive according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • extra deep, with permanent magnet
  • chrome-plated, polished
  • knurled
  • female square drive according to DIN 3120-C 10, ISO 1174, with ball
  • retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • extra deep, with rubber insert and bore hole Ø 9 mm
  • chrome-plated, polished
  • knurled
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • extra deep, with permanent magnet
  • chrome-plated, polished
  • knurled
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • extra deep, with rubber insert
  • chrome-plated, polished
  • knurled
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • for cleaning and adjusting of spark plug contacts
  • Cut 2 second
  • high grade tool steel C45/1.0503
  • 6 pcs.
  • for cleaning and adjusting of spark plug contacts
  • in a plastic storage wallet
  • Cut 2, second
  • high grade tool steel C45/1.0503
  • for cleaning of spark plug contacts
  • corrugated brass wire bristles, 3 rows
  • wooden handle
  • for function testing of spark plugs with one electrode
  • plastic handle with metal clip
  • blade made of Chrome-Vanadium 31CrV3 / 1.2208
  • appropriate for injection nozzles on Diesel engine vehicles
  • size 27 mm, recessed internal contour
  • hot-forged
  • chrome-plated
  • knurled
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • extra-long pattern
  • for lambda oxygen sensor with fix mounted cable
  • internal hexagon size 22 mm
  • slotted for passing the cable
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • Chrome-Molybdenum 42CrMo4 / 1.7225
  • especially appropriate for difficult to reach areas
  • forged pattern
  • throughout hardened and tempered to 42-46 HRC
  • chrome-plated
  • ELORA-Chrome Vanadium 31CrV3 / 1.2208
  • for dismantling parts lying on top of each other, for centration of drill bores
  • chrome plated 4 square shaft
  • ELORA-Chrome-Vanadium 31CrV / 1.2208
  • pattern with permanent magnet and T-handle
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • for lifting small parts in hard to reach places
  • with flexible shaft
  • Shaft made of steel
  • 2-C QUATROLIT handle with hanging hole
  • ground work surfaces
  • non-slip QUATROLIT-2C-handle
  • heat treated steel
  • for gripping small parts in hard to reach places
  • with flexible shaft, Ø 7mm
  • steel stem, operating piece made of plastic
  • for inspecting hard to see locations
  • round mirror with metal frame
  • with flexible shaft
  • shaft made of steel
  • 2-C QUATROLIT handle with hanging hole
  • for cutting tubes from Ø 15 - 75 mm und 2,5 mm wall thickness
  • easy adjustment during the cutting operation by large thumb screw
  • Spare chain ELORA No. 301E
  • ELORA-No. 524E is an extension and a replace chain at the same time
  • quick release lever with return spring
  • Tempered steel, cutting wheel made of high alloy special steel
  • for clamping of any shaped profile, especially appropriate in narrow and difficult to reach areas like oil filters, exhaust pipes, etc.
  • ELORA-No. 524E is an extension as well as spare chain at the same time
  • quick release lever with return spring
  • nickel-plated
  • jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • for cap nuts and pipe fittings
  • chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174
  • for power tools
  • special steel, phosphated
  • female square drive according to DIN 3121-G 12,5, ISO 1174