Made in Germany

Details

374-2
Flat Nose Plier, angled pattern

extra-long for difficult to access areas
grooved gripping surfaces
ground, with dip insulated, black handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

show more show less

Details

5320-ST
Universal Tweezer

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

Details

138-A
Siphon or Connector Plier

loosening and tightening of pipe connections with round union nuts from Ø 25 mm
loosening and tightening of ring lock connectors (like Canon connectors)
drop forged, with slip on joint, 4 adjusting positions
jaw width 10 mm
with screwed plastic jaws
chrome-plated, PVC-dip insulated handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

show more show less

Details

1080, 1081, 1082
Universal Cable Knife

1080-1081: for wire of 4-28 mm Ø
1082: for wire of 8-28 mm Ø
for precise, quick and safe stripping of all kind of round wires, round and length cut in one operation
blade with transparent plastic safety cover
hardened special purpose steel blade, black plastic handle

show more show less

Details

1083
Round Wire Stripper

for round wire of 8-13 mm Ø (e.g. NYM 3 x 1,5 mm² up to 5x2,5 mm²)
for flush cutting-off even in difficult to access areas like for example distribution boxes
automatic adjustment of the cutting depth
hardened special purpose steel blades, black plastic handle

Details

1094
Automatic Wire Stripper

for wire diameter 0,2-6,0 mm²
automatic adjustment to wire diameter
with length stop for stripping length from 5-12 mm
integrated side cutter for wire up to Ø 2,0 mm
blades made of hardened special steel
black plastic handles

show more show less

Details

1095
Wire Stripper

for wire cross section 0,5-6,0 mm²
for automatic stripping of inner conductors
with scale for stripping length from 5-12 mm
integrated side cutter
blades made of hardened special steel
black plastic handles

show more show less

Details

1100-L
Tool Cabinet, large Model

2 doors, with 2 drawers
lockable with cylinder lock
powder coated, ELORA-yellow (RAL 1006), doors black (RAL 9005)
stable steel sheet version

Details

1212
Mechanics Foam Mat

high comfort due to high foam quality
carrying and hanging handle
washable
oil and water-resistant
made of XPE foam material, black and yellow
dimensions: 210 x 450 x 30 mm

show more show less

Details

1220-L7
Roller Tool Cabinet Super Caddy, 7 drawers

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 7 storage compartments for small parts and rim on all sides
200 kg shelf load capacity due to strengthened top cover
solid handlebar, mounting possible on both sides
sides and back panel with Euro-Perforation 10 x 38 mm (hole square 10 x 10 mm, hole centre-hole centre 38 x38 mm) for mounting accessory hooks, rays, waste basket, can holder, paper roll holder, cable drum
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 40 kg
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
can be individually divided with separators or equipped with ELORA-OMS modules
total loading capacity 300 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
dividers for drawers separately available
delivery without tools and accessories
suitable assortments: WS and OMS
other drawer types and special colours on request

show more show less

Details

1227-L
Workshop cabinet

completely welded steel sheet construction
2 doors, with 4 height-adjustable shelves
load capacity 50 kg per shelve
doors strengthened and 3-point safety lock
rotary handle with cylinder lock
powder coated, ELORA-yellow (RAL 1006) doors black (RAL 9005)

show more show less

Details

130BI-240
Waterpump Plier

lay-on slip joint and teeth cut-out
tooth inductive hardened, trap protection
chrome plated, polished, dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN ISO 8976, Form A

show more show less

Details

133-250
Quick Gripping Waterpump Plier

quick adjustment by press a button
box joint
absolute safe, no displacement during work
self-locking due to gripping surfaces staggered in reverse order
Teeth inductive hardened, trap protection
chrome-plated, polished jaw
ELORA Chrome-Vanadium 31 CrV3 /1.2208
acc. to DIN ISO 8976 Form B

show more show less

Details

137
Plumbing Wrench

for chrome and nickel plated bathroom fittings
with lever clamp
with exchangeable plastic jaws, 8mm wide
gunmetal-finished
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

show more show less

Details

138
Siphon or Connector Plier

loosening and tightening of pipe connections with round union nuts from Ø 25 mm
loosening and tightening of ring lock connectors (like Canon connectors)
drop forged, with slip on joint, 4 adjusting positions
serrated jaws, jaw width 10 mm
chrome-plated, PVC-dip insulated handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

show more show less

Details

139
Spud Wrench

for the assembly of valve nipples in heating units for 3/8", 1/2", 3/4", 1" and 4 intermediate steps
with 1/2" square drive, chrome plated
high grade tool steel

Details

1450-3
Spinner Handle 1/4"

nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

show more show less

Details

1483-...
Shape Cutting Tin Snips

for short, straight and figure cuts, small radius
blades additionally inductive hardened and ground, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

show more show less

Details

1484-...
Ideal Tin Snips

for continuous cuts and figure cuts
blades additionally inductive hardened and sharpened, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

show more show less

Details

155-...
Hexagon Key with T-Handle

for inside hexagon screws
blades nickel plated
with black T-Handle and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
DIN ISO 2936

show more show less

Details

158R-...
Hexagon Key Sets

for inside hexagon screws
sorted on metal ring
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159-...
Hexagon Keys, metric

for inside hexagon screws
0,7 up to 1,3 gunmetal finished, all other sizes nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

Details

159A-...
Hexagon Keys, inch

for inside hexagon screws
nickel plated
ELORA-Chrome-Vanadium 59 CrMoV4 / 1.2242
DIN ISO 2936

Details

159KU-...
Ball End Hexagon Key, extra long, metric

for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159KUA-...
Ball End Hexagon Key, extra long, inch

for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159L-...
Hexagon Keys, extra long, metric

for inside hexagon screws
extra long
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159LA-...
Hexagon Keys, extra long, inch

for inside hexagon screws
extra long
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159S-...A
Hexagon Key Sets, inch

for inside hexagon screws
in black plastic wallet
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159S-...L
Hexagon Key Sets, extra long, metric

for inside hexagon screws
in plastic holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159S-...M
Hexagon Key Sets, metric

for inside hexagon screws
in black plastic wallet
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159S-8P
Hexagon Key Set

for inside hexagon screws
in plastic storage box
nickel plated
ELORA-Chrome-Vanadium 59 CrMoV 4 / 1.2242
DIN ISO 2936

show more show less

Details

159S-KK...
Hexagon Key Sets

for inside hexagon screws
plastic holder with elevating mechanism
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159S-KUB
Ball End Hexagon Key Set, extra long

in foldable plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159SK-...
Hexagon Key Sets

for inside hexagon screws
metal holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

Details

159SK-9M, 159SK-10M
Hexagon Key Sets

for inside hexagon screws
in plastic holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159SKU
Ball End Hexagon Key Set, extra long

in 2C-plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159SKU E
Ball End Hexagon Key Set, extra long

in plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

Details

159SW
Hexagon Key Set

for inside hexagon screws
in workshop stand
blades nickel plated
2C T-Handle with lateral drive and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

show more show less

Details

159W-...
Hexagon Key with T-Handle

for inside hexagon screws
blades nickel plated
2C T-handle with lateral drive and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
DIN ISO 2936

show more show less

Details

159Z-...
Hexagon Key with pin

for inside hexagon screws with bore hole
nickel plated
Chrome-Vanadium 59CrV4 / 1.2242

Details

467-BI 160
Sealing Plier with side cutter

for sealing and cutting the sealing wire
suitable for lead and plastic seals
stamp [diameter]8mm, neutral, interchangeable
polished chrome-plated
with dip-insulated handles
ELORA-high grade tool steel C60 / 1.0601

show more show less

Details

160S-KXZN
Offset Key Set

for inside multi-point B &S and XZN screws
metal holder with elevating mechanism
nickel plated
Chrome-Vanadium 59CrV4 / 1.2242

Details

162-SWTX
TORX®-Key Set with T-Handle

Workshop display
for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
2C T-handle with lateral drive and suspension hole
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

162LTX...
TORX®-Key, long

for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

Details

162S-KKTTX
TORX®-Key Set

plastic holder with elevating mechanism
for inside TORX® safety screws
with hole at drive end
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

162S-KTTX
TORX®-Key Set

metal holder, nickel plated
for inside TORX® safety screws
with hole at drive end
gunmetal finished
Chrome-Vanadium 59 CrMoV 4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

162S-KTX
TORX®-Key Set

metal holder, nickel plated
for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

162S-TXKU
TORX®-Ball End Key Set

in plastic holder
for inside TORX® screws
for use in awkward areas
swivel angel up to 25°
ball profile on the long side
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

162SLTX
TORX®-Key Set, long

in plastic holder
for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

162TX-...
TORX®-Key, short

for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

Details

162WTX-...
TORX®-Key with T-Handle

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
2C T-handle with lateral drive and suspension hole
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

Details

163
Tyre Lever

especially suitable for tubeless tyres
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

Details

164
Pry Bar

especially appropriate for difficult to reach areas
forged pattern
throughout hardened and tempered to 42-46 HRC
chrome-plated
ELORA-Chrome Vanadium 31CrV3 / 1.2208

show more show less

Details

1640
Adjustable File Holder

for file blades ELORA-No. 1641 (delivery without file blade)
adjustable pattern with clamping screw
Aluminium

Details

1640H
File Holder for Car Body Files

for file blades ELORA-No. 1641 (delivery without file blade)
wood

Details

1641-...
Carbody File Blades

for file holder ELORA-No. 1640 and 1640H

Details

166
Mounting Bar

for dismantling parts lying on top of each other, for centration of drill bores
chrome plated 4 square shaft
ELORA-Chrome-Vanadium 31CrV / 1.2208

Details

1660-...
Soft Faced Hammer

face holder made of cast zinc
exchangeable faces made of impact resistant Cellulose-Acetate
ash handle
DIN 53505, 65 Shore D

Details

1660E-...
Spare Plastic Faces for soft faced hammer

for ELORA-No. 1660-...
made of impact resistant Cellulose-Acetate

Details

1660KL-...
Wedges for Soft Faced Hammer

for ELORA-No. 1660-...

Details

1660ST-...
Handles for Soft Faced Hammer

for ELORA-No. 1660-... and 1661-...
ash wood

Details

1661-...
Plastic Hammer

face holder made of cast zinc
exchangeable faces made of impact resistant Desmopan
ash handle
DIN 53505, 55 Shore D

Details

1661E-...
Spare Plastic Faces

for ELORA-No. 1661-...
wear- and break-resistant material Desmopan

Details

167
Tyre Pressure Gauge

with cranked measuring intake for VG8 screw thread
with push-button for resetting the indicator and rotatable for zero regulation
measuring scale 0-10 bar, resp. 0-140 PSI
pressure indication in BAR and PSI
accuracy ± 1% of the value

show more show less

Details

167-1
Valve Rotator

for screwing on and off the valve inserts as well as for pushing the valve pin in tyre valves
plastic grip

Details

1675/2-...
Nail Lifter, hexagonal

heavy duty pattern
hardened and tempered
high grade tool steel C45 / 1.0503

Details

1676/1-...
Wrecking Bars

with straight edge and point
working end hardened
high grade tool steel C45 / 1.0503

Details

1676/2-...
Wrecking Bars

with angled edge and straight point
working end hardened
high grade tool steel C45 / 1.0503

Details

1676/3-...
Wrecking Bars

with point and claw
working end hardened
high grade tool steel C45 / 1.0503

Details

1676/4-...
Wrecking Bars

heavy duty pattern
with ball head and edge
working end hardened
high grade tool steel C45 / 1.0503

Details

1676/6-...
Wrecking Bars

heavy duty pattern
with curved edge and straight point
working end hardened
high grade tool steel C45 / 1.0503

Details

1678
Carpenter

drop forged hammer head
black, nonslip plastic handle
head coated and mechanically fixed
steel tube handle
head made from high grade tool steel C45 / 1.0503

show more show less

Details

168-...
Joint Bolt Puller

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated, gunmetal-finish
high grade tool steel

Details

1680-330
Claw Hammer

drop forged hammer head
black, nonslip plastic handle
coated head, face and claw polished
steel tube handle
head made of high grade tool steel C45 / 1.0503

show more show less

Details

169-...
Joint Bolt Puller

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated, gunmetal-finish
high grade tool steel

Details

1690-...
Dead-Blow Nylon Soft Faced Hammer

specially appropriated for targeted strikes (automobile industries, moulds and tool making)
for non-rebounding strikes without loosing power of impact and material gently work
strong steel center section with holding pins for the spare nylon faces
mass of steel shot in the hammer head exactly fine-tuned (mass inertia principle)
nylon striking faces, exchangeable
hickory handle
DIN 53505, 73 Shore D

show more show less

Details

1690E-...
Spare Nylon Faces

for ELORA-No. 1690-...
wear- and break-resistant material Nylon

Details

170-...
Wheel Nut Wrench

for loosening and tightening of wheel nuts and wheel bolts of trucks
forged pattern
additional 13/16 AF female square drive within the size of 32 mm, for operating of wheel bolts with male square drive
to operate with tommy bar ELORA-No. 171
nickel-plated
special tool steel

show more show less

Details

171-...
Tommy Bars for Wheel Nut Wrench

to operate the wheel nut wrench ELORA-No. 170
nickel-plated
Chrome-Vanadium 31CrV3 / 1.2208

Details

172-...
Puller

2 legs, heavy-duty pattern, silver-coloured, puller legs to be used on both sides: one side with wide, the other side with narrow hooks
zinc-plated, spindles gunmetal-finish
high grade tool steel

Details

173-...
Standard Puller

heavy forged pattern
2 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

show more show less

Details

173K-...
Standard Puller

heavy-duty, forged pattern
2 arms, with very narrow forged pulling hooks
especially suitable for difficult to reach areas
zinc-plated, spindle and pulling hook end gunmetal-finish
high grade tool steel

show more show less

Details

173S-2
Puller Set

2 arms with 3 pairs of hooks in different lengths
especially suitable for difficult to reach areas
zinc-plated, spindle and pulling hook end gunmetal-finish
high grade tool steel

Details

174-50
Battery Terminal Puller

for pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
10 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

show more show less

Details

174-80/2
Battery Terminal Puller

for pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
12 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

show more show less

Details

174-80/3
Battery Terminal Puller

for pulling off battery terminals, ball bearings, gear-wheels, etc.
3 arms
12 mm wrench size 12 mm
zinc-plated, spindle gunmetal-finish
high grade tool steel

show more show less

Details

175-...
Hub Puller

for vehicle hubs with a bolt circle diameter up to 225 mm
pulling legs movable and replaceable
nickel-plated, spindle gunmetal-finish
Chrome-Vanadium 31CrV3 / 1.2208

Details

176-...
Puller

for pulling off ball bearings, gear-wheels, discs, etc.
heavy-duty, forged pattern
2 arms
zinc-plated, spindle gunmetal-finish
high grade tool steel

show more show less

Details

177-...
Puller

for pulling off ball bearings, gear-wheels, v-belt pulley etc.
heavy-duty, forged pattern
3 arms
zinc-plated, spindle gunmetal-finish
high grade tool steel

show more show less

Details

178-...
Stud Extractor

for left and right hand thread
zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
high grade tool steel C45 / 1.0503

Details

185-...
Wheel Nut Wrench

bent pattern with hub cap puller
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

Details

186
Tyre Lever

especially suitable for truck tyres
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

Details

187-160
Strap Wrench

for removing oil filters and clamping of round shaped parts
max. parts diameter 160 mm
non-slip fibre ribbon, width 22 mm
plastic coated grip
high grade tool steel

show more show less

Details

187-180
Strap Wrench

for removing oil filters and clamping of round shaped parts
especially appropriate for trucks, construction and agriculture machinery
max. parts diameter 180 mm
non-slip fibre ribbon, width 50 mm
with 1/2" female square drive
high grade tool steel

show more show less

Details

187-280
Strap Wrench

for removing oil filters and clamping of round shaped parts
especially appropriate for trucks, construction and agriculture machinery
max. parts diameter 280 mm
non-slip fibre ribbon, width 25 mm
drop forged pattern
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

show more show less

Details

190-...
Filter Wrench

for all common oil-, fuel filter and round couplings
with adjustable steel band
plastic coated grip
nickel-plated

Details

195CV-...
Four Way Wheel Nut Wrench

for loosening and tightening of wheel nuts and wheel bolts of trucks and tractors
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

show more show less

Details

195CV-17, 195CV-5/8
Four Way Wheel Nut Wrench

for cars, light trucks and agricultural machinery
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

show more show less

Details

196-...
Four Way Wheel Nut Wrench

for loosening and tightening of wheel nuts and bolts of trucks, tractors and construction machinery
heavy-duty pattern due to forged centrepiece
dimensions: 750 x 750 mm
additional 13 / 16” female square within the size 32 mm for operating of wheel nuts with male square
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

show more show less

Details

198
Tyre Tread Gauge

for measuring the tyre tread
measuring range 0-30 mm
reading accuracy 0,1 mm (vernier scale 1/10 mm)
lenght of locating surface 23 mm
solid brass

show more show less

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h