ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719

  • for the assembly of valve nipples in heating units for 3/8", 1/2", 3/4", 1" and 4 intermediate steps
  • with 1/2" square drive, chrome plated
  • high grade tool steel
  • for thin-walled metal tubes
  • with a cutting wheel and two guide rollers
  • with steel bearing spindle and ICS-wheel quick-change system
  • yellow powder coating
  • made of zinc die-cast
  • for thin-walled metal tubes
  • with 4 guiding rolls + ICS-wheel quick-change system
  • with integrated burr remover with NOGA wheel
  • with steel bearing spindle
  • Spare wheel in rotary knob cap
  • with built-in wheel ELORA-No. 180-S76B 30 x 6,2 mm for plastic and composite tubes
  • Spare wheel in rotary knob cap ELORA-No. 180-S76A for thin-walled metal tubes 19 x 6,2 mm
  • with 4 guiding rolls + ICS-wheel quick-change system
  • Spare wheel in rotary knob cap
  • with rapid feed
  • for loosening and tightening the nuts of water faucets on the bottom of the washing- or hand basin
  • forged shank with swivel-handle and steel claw
  • yellow powder coated, gunmetal finished claw and knob
  • ELORA Chrome-Vandium 31CrV3 / 1.2208
  • especially suitable for V2A tubes
  • with 2 needle bearing guide rollers made of stainless steel
  • with needle bearing cutting wheel for 2A pipes including spare wheel in the turning knob cap
  • with steel bearing spindle and ICS wheel quick-change system
  • ergonomic rotary knob with integrated spare cutting wheel
  • made of die-cast zinc
  • especially suitable for V2A tubes
  • with 4 needle bearing guide rollers made of stainless steel
  • with needle bearing cutting wheel for 2A pipes including spare wheel in the turning knob cap
  • with steel bearing spindle and ICS wheel quick-change system
  • ergonomic rotary knob with integrated spare cutting wheel
  • with removable tube deburrer + NOGA blade
show more show less
  • especially suitable for V2A tubes
  • with 4 needle bearing guide rollers made of stainless steel
  • with needle bearing cutting wheel for 2A pipes including spare wheel in the turning knob cap
  • with steel bearing spindle and ICS wheel quick-change system
  • ergonomic rotary knob with integrated spare cutting wheel
  • with removable tube deburrer + NOGA blade
  • made of aluminium die-cast
  • for tubes up to 63 mm / 2. For tubes with 50 mm diameter or smaller with 1 stainless steel blade PTFE coated
  • for plastic pipe and composite pipe cutting scissors with in 2 positions adjustable tube approaching system
  • suitable for PE-, PP-, PVC-, PVDF-, PB- and VPE- pipes and hoses
  • for clean, right-angled cuts
  • with ratchet feed
  • made of magnesium die cast
  • for tubes up to 63 mm / 2. For tubes with 50 mm diameter or smaller with 1 stainless steel blade PTFE coated
  • for plastic pipe and composite pipe cutting scissors with in 2 positions adjustable tube approaching system
  • suitable for PE-, PP-, PVC-, PVDF-, PB- and VPE- pipes and hoses
  • for clean, right-angled cuts
  • with ratchet feed
  • made of magnesium die cast
  • for tubes up to 63 mm / 2. For tubes with 50 mm diameter or smaller with 1 stainless steel blade PTFE coated
  • for plastic pipe and composite pipe cutting scissors with in 2 positions adjustable tube approaching system
  • suitable for PE-, PP-, PVC-, PVDF-, PB- and VPE- pipes and hoses
  • for clean, right-angled cuts
  • with ratchet feed
  • made of magnesium die cast
  • 3 pcs.
  • for beading of copper and light alloy tubes
  • flaring cone 90 ° hardened, corresponds to 45 ° at the tube
  • body made of zinc die-cast
  • jaws made of steel, smooth inside, phosphated
  • pipe cutter with a cutting wheel and two guide rollers
show more show less
  • for cutting tubes from Ø 15 - 75 mm und 2,5 mm wall thickness
  • easy adjustment during the cutting operation by large thumb screw
  • Spare chain ELORA No. 301E
  • ELORA-No. 524E is an extension and a replace chain at the same time
  • quick release lever with return spring
  • Tempered steel, cutting wheel made of high alloy special steel
  • for bends up to 90°
  • for thin-walled bendable steel pipes or copper pipes
  • with plastic handle protectors
  • for dimensions from 4,75 – 10 mm (3/16“ – 3/8“) Ø up to 90°
  • for soft copper pipes EN 1057, Ne-metal pipes as well as thin-walled precision steel pipes and brake lines
  • with 2 turnable bending dies 3/16”, ¼” and 5/16”, 3/8”
  • for expanding copper tubes
  • black, made of special steel
  • for effortless deburring of holes, slots and edges on metals and plastics
  • special-bit (blade B12)
  • hexagon drive acc. To DIN 3126 C 6,3, ISO 1173
  • suitable for all 1/4''-drive bit holders
for inner and outer deburring of copper-, brass-, aluminium- or plastic tubes
  • for thick-walled metal tubes
  • with a cutting wheel and two guide rollers
  • 65-2 body steel forged / 65-4 spheroidal graphite iron
  • with spring loading system and ICS-wheel quick-change system
  • Cutting wheel made of high alloy special steel