ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719

Our products have a Quatrolit® 2-component handle, which ensures optimal haptics and easy handling. In addition, the ergonomic handle enables highly efficient work and easier use.

  • strong edition for tough conditions
  • lay on cutter box for better cutting
  • maximum stability under load by inductive hardening of the blades
  • cutting edge hardness: 63-64 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
  • serrated gripping surface and burner hole
show more show less
  • 49 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • socket parts according to DIN 3122, ISO 3315
  • 4 pcs.
  • carton box packed
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • for plain slotted screws
  • matt chrome plated forged blade
  • through hardened
  • blade edge gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for holding and bending
  • short jaws, serrated gripping surface
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • matt chrome-plated
  • plastic handle
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 10, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • straight edition
  • for plugging on and pulling down of deep-seated glow plugs
  • nonslip QUATROLIT®-2C-handles
  • matt chrome plated
  • ELORA-high grade tool steel C45 / 1.0503
  • bit lock with permanent magnet
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female hexagon drive according to DIN 3126 D 6,3, DIN ISO 1173
  • maximum stability under load by inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for hardened steel wire, piano wire (tensile strength 2300N/mm²)
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C60 / 1.0601
  • similar DIN ISO 5748
  • high cutting performance with minimal effort
  • maximum stability under load by additional inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
show more show less
  • nonslip QUATROLIT®-2K-handle
  • with suspension hole
  • limited torque!
  • chrome plated
  • long version
  • nonslip QUATROLIT®-2K-handle
  • with suspension hole
  • matt chrome plated
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 3125, ISO 2725-1
  • long version
  • nonslip QUATROLIT®-2K-handle
  • with suspension hole
  • matt chrome plated
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 3125, ISO 2725-1
  • short version
  • nonslip QUATROLIT®-2K-handle
  • with suspension hole
  • matt chrome plated
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • 8 pcs.
  • assortment in convenient plastic case
  • 3 pcs.
  • carton box packed
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • 3 pcs.
  • carton box packed
  • chrome-plated, polished
  • 4 pcs.
  • for removing and inserting of O-rings and sealing gaskets
  • QUATROLIT®-2C-handles with suspension hole
  • blade matt chrome-plated
  • Chrome-Vanadium 58CrV4 / 1.8161
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,0 cm, Depth: 57,3 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • for ELORA-roller tool cabinets
  • black, with yellow signal colour
  • oil and grease resistant
  • chemical resistant
  • Width: 41,5 cm, Depth: 18,9 cm
  • hard foam insert
  • black, with transparent cover
  • Width: 31,5 cm, Depth: 14,9 cm
  • stable ABS plastic
  • extremely rugged ratchet with round head
  • forged gear wheel with push through square coupler
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • extra long design with slim head
  • forged gear wheel with safety locking and quick release button
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • extra long design with slim head
  • forged gear wheel with male and female square
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • rugged ratchet with small, slim head
  • forged gear wheel with male and female square
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • rugged ratchet with small, slim head
  • forged gear wheel with safety locking and quick release button
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • with small, slim head
  • forged gear wheel with safety locking and quick release button
  • smallest possible swivel angle 5°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • with small, slim head
  • forged, fine teethed wheel with grippy metal switching disk
  • smallest possible swivel angle 5°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • extra long version
  • 180° swivelling
  • forged gear wheel with male and female square
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • extra long version
  • 180° swivelling
  • forged gear wheel with safety locking and quick release button
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • 180° swivelling
  • forged gear wheel with male and female square
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • 180° swivelling
  • forged gear wheel with safety locking and quick release button
  • smallest possible swivel angle 11,25°
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
show more show less
  • chrome-plated blade
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • special steel
  • with long jaws, serrated gripping surface
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • for plain slotted screws
  • matt chrome plated forged blade with forged hexagon section
  • through hardened
  • blade edge gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for plain slotted screws
  • matt chrome plated hexagon blade with forged hexagon section
  • through hardened
  • blade edge gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for plain slotted screws
  • matt chrome plated forged blade
  • through hardened
  • blade edge gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated forged blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated forged blade with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated hexagon blade with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • matt chrome plated forged blade with forged hexagon section
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for inside TORX® screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for inside TORX® safety screws
  • with bore hole in tip
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
show more show less
  • hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
  • nonslip QUATROLIT®-2C-handle
  • chuck and bolster made from special tool steel WX 69
  • 5 pcs.
  • carton box packed
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 6 pcs.
  • carton box packed
  • forged blade
  • through hardened
  • no galvanic surface treatment
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 6 pcs.
  • in black plastic packaging with transparent cover
  • matt chrome plated forged blade
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 4 pcs.
  • for inside TORX®screws
  • in black plastic wallet
  • hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • 5 pcs.
  • carton box packed
  • matt chrome plated hexagon blade with forged hexagon section
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 5 pcs.
  • in black plastic packaging with transparent cover
  • matt chrome plated hexagon blade with forged hexagon section
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 6 pcs.
  • carton box packed
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 7 pcs.
  • carton box packed
  • matt chrome plated hexagon blade with forged hexagon section
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • 6 pcs.
  • STX=for inside TORX® screws
  • STTX=for inside TORX® safety screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
show more show less
  • carton box packed
  • in black plastic packaging with transparent cover
  • matt chrome plated hexagon blade with forged hexagon section
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • for inside TORX® screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • maximum swivel angle 20°
  • nonslip QUATROLIT®-2C-handle
show more show less
  • for inside hexagon screws
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • maximum swivel angle 20°
  • nonslip QUATROLIT®-2C-handle
show more show less
  • for inside TORX® screws
  • for low placed screw connections e.g. instrument board and car body
  • matt chrome plated blade
  • through hardened
  • tip gunmetal finished
  • nonslip QUATROLIT®-2C-handle
show more show less
  • for plain slotted screws
  • forged blade
  • through hardened
  • no galvanic surface treatment
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • for cross slotted screws
  • forged blade
  • through hardened
  • no galvanic surface treatment
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
show more show less
  • oval head
  • maximum stability under load by inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
show more show less
  • 45° bent, serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • 90° bent, serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • similar DIN ISO 5745
  • serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • according to DIN ISO 5745
  • INM=12 pcs., INA=9 pcs.
  • for inside hexagon screws
  • in black metal storage case with plastic insert
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
show more show less
  • 11 pcs.
  • suitable for inside TORX®resp. inside-TORX®safety screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • socket parts according to DIN 3122, ISO 3315
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • 9 pcs.
  • for inside multi-point screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 28 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 31 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 19 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 15 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 26 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 57 pcs.
  • in black metal storage case with OMS-hard foam insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 18 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 29 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 31 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 25 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 27 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 30 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 30 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 27 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 8 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 18 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 20 pcs.
  • in black metal storage case with OMS-hard foam insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 12 pcs.
  • suitable for inside TORX®screws resp. inside TORX®safety screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA