ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719

This product is produced in Germany and is subject to the highest quality parameters from our proven partners.

  • with straight edge and point
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • with angled edge and straight point
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • with point and claw
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • heavy duty pattern
  • with ball head and edge
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • heavy duty pattern
  • with curved edge and straight point
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • completely welded steel sheet construction
  • 2 doors, with 4 height-adjustable shelves
  • load capacity 50 kg per shelve
  • doors strengthened and 3-point safety lock
  • rotary handle with cylinder lock
  • powder coated, ELORA-yellow (RAL 1006) doors black (RAL 9005)
  • side cutter with dual function (cutting and stripping of insulation)
  • stripping holes for single and multi-wire conductors with 1,5 mm² and 2,5 mm² diameter
  • oval head
  • maximum stability under load by inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for medium hard wire, steel wire (tensile strength 1600N/mm²)
show more show less
  • self opening by spring
  • V-shaped jaws for stripping of plastic insulation from single and multi-wire conductors
  • adjustment of opening position to required diameter by adjustable screw with locknut
  • for wires from Ø 0,8 to 6,0 mm
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • for wire cross section 0,5-6,0 mm²
  • for automatic stripping of inner conductors
  • with scale for stripping length from 5-12 mm
  • integrated side cutter
  • blades made of hardened special steel
  • black plastic handles
  • self-adjusting blades in respect of diameter to be stripped
  • for stripping of single or multi-wire conductors
  • for wires from Ø 0,5 to 5,0 mm
  • nonslip QUATROLIT®-2C-handles
  • chrome-plated, polished
  • ELORA-high grade tool steel C45 / 1.0503
  • for wires up to 10 mm Ø
  • self-opening, one hand locking function
  • with red, impact resistant plastic handles
  • stainless steel
  • 15 pcs.
  • for removing screen wiper arms
  • heavy-duty, forged pattern
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • in black plastic box with plastic foam insert
  • scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
  • laminated beech wood (Multiplex) work bench board
  • drawers with ball-bearing guide rails, full telescopic drawer slide
  • 6 drawers with roller bearing, internal dimensions of drawers: width 573 x Depth 410
  • individual separation using length- and cross dividers, resp. using ELORA OMS-modules
  • central locking with mutual drawer locking
show more show less
  • for loosening and tightening of wheel nuts and wheel bolts of trucks
  • forged pattern
  • additional 13/16 AF female square drive within the size of 32 mm, for operating of wheel bolts with male square drive
  • to operate with tommy bar ELORA-No. 171
  • nickel-plated
  • special tool steel
  • bent pattern with hub cap puller
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • with steel tube handle
  • coated
  • for clamping of profiles and straps, especially appropriate to connect two working pieces of the same thickness
  • the large opening allows a good overview during welding
  • quick release lever with return spring
  • drop-forged, nickel-plated
  • jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • for clamping of profiles and straps, especially appropriate to connect two working pieces of the same thickness
  • the large opening allows a good overview during welding
  • quick release lever with return spring
  • drop-forged, nickel-plated
  • jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • annealed cast iron
  • lay-on slip joint and teeth cut-out
  • tooth inductive hardened, trap protection
  • chrome plated, polished, dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN ISO 8976, Form A
  • 8 and 10 pcs.
  • in black plastic wallet
  • for punching of carton, leather, rubber, sealing material and other soft material
  • forged, cutting edge hardened and ground
  • shaft red coated
  • lightly conical inside for easy removal of the cuttings
show more show less
  • for punching of carton, leather, rubber, sealing material and other soft material
  • forged, cutting edge hardened and ground
  • shaft red coated
  • lightly conical inside for easy removal of the cuttings
  • high grade steel
  • according to DIN 7200, Form A
  • for 120-230V AC
  • contact sensor in plastic head for activating test function
  • transparent plastic handle with lens and red plastic head
  • nickel-plated blade and plastic sheathed
  • for 120-230V AC
  • contact sensor in brass head for activating test function
  • transparent plastic handle with lens and brass head
  • nickel-plated blade and plastic sheathed
  • with safety screw lock
  • chrome plated
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • VDE insulated up to 1.000V, according to EN60900/IEC 60900
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • 2-colour-multilayer isolation (yellow, red) for easy identification
  • of insulation damages
  • smallest possible swivel angle 5 °
  • tested according to EN/IEC 60900
  • individually tested with 10.000V and approved for 1.000V
  • ELORA Chrome-Vanadium 31CrV3 / 1.2208
  • self-opening by spring
  • V-shaped jaws for stripping of plastic insulation from single and multi-wire conductors
  • adjustment of opening position to required diameter by adjustable screw with locknut
  • for wires from Ø 0,8 - 6,0 mm
  • chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • self-adjusting blades in respect of diameter to be stripped
  • for wires from 0,5-5,0 mm
  • for stripping of single or multi-wire conductors
  • chrome-plated, polished, with QUATROLIT®-2C-handles
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • for 100-250V AC
  • contact sensor for activating test function
  • with plastic clip and pin hole
  • zincked blade
  • according to DIN VDE 0680 Teil 6 1977-02
  • high cutting performance with minimal effort
  • maximum stability under load by additional inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
  • chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • female square according to DIN 3120-C 12,5, ISO1174, with ball retaining groove
  • chrome-plated
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • VDE insulated up to 1.000V, according to EN60900/IEC 60900
  • tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • 13 pcs.
  • in red plastic box with 2-colour-plastic inlay
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • chrome plated, polished, with nonslip QUATROLIT®-2C-handles
  • Plier acc. to DIN ISO 5745
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • 45° bent, serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • chrome plated, polished, with nonslip QUATROLIT®-2C-handles
  • acc. to DIN ISO 5745
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • 90° bent, serrated gripping surface, burner hole and side cutter
  • maximum stability under load of the blades by inductive hardening
  • chrome plated, polished, with nonslip QUATROLIT®-2C-handles
  • Plier similar to DIN ISO 5745
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • jaw set at 15°
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • VDE insulation up to 1.000V, according to EN 60900/IEC 60900
  • tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages
  • VDE insulation up to 1.000V, according to EN 60900/IEC 60900:2004
  • tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
  • ELORA Chrome-Vanadium 31CrV3 / 1.2208
  • 10 pcs.
  • in red plastic box with 2-colour plastic inlay
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • only to use with ELORA-No. 972, 973 and 974-125
  • chrome-plated
  • female square according to DIN 3120-C 12,5, ISO1174, with ball retaining groove
  • VDE insulated up to 1.000V, according to EN60900/IEC 60900
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • 5 pcs.
  • in an environmentally friendly carton package
  • for plain slotted screws
  • blade gunmetal-finish
  • impact resistant handle with suspension hole
  • up to ELORA-No. 900IS-100 ELORA-Chrome-Vanadium 73MoV52 / 1.2381 else ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
  • blade according to DIN ISO 2380-1
  • for external hexagon screws
  • gunmetal-finish blade
  • impact resistant QUATROLIT-2C-handle with pin hole
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • VDE insulation up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
  • according to DIN 7445, ISO2725-1
  • for cross slotted screws
  • blade gunmetal-finish
  • impact resistant handle with suspension hole
  • up to ELORA-No. 910PH-0 ELORA-Chrome-Vanadium 73MoV52 / 1.2381, otherwise ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
  • tip according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • blade gunmetal-finish
  • impact resistant handle with suspension hole
  • ELORA-Chrome-Vanadium 73MoV52 / 1.2381
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
  • tip according to DIN ISO 8764-1 PZ
  • with short jaws, serrated gripping surface
  • chrome plated, polished, with nonslip QUATROLIT®-2C-handles
  • Plier acc. to DIN ISO 5745
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • gear-wheel with safety locking mechanism and quick release button
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • VDE insulated up to 1.000V, according to EN60900/IEC 60900
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device
  • 3 pcs.
  • carton box packed
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • high cutting performance with minimal effort
  • maximum stability under load by additional inductive hardening
  • cutting edge hardness: 63-65 HRC
  • for hardened steel wire, piano wire (tensile strength 2300 N/mm²
  • chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C60 / 1.0601
  • for holding and bending
  • short jaws, serrated gripping surface
  • chrome plated, polished, with nonslip QUATROLIT®-2C-handles
  • Plier acc. to DIN ISO 5745
  • handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
  • ELORA-high grade tool steel C45 / 1.0503
  • German pattern
  • strong edition for tough conditions
  • lay on cutter box for better cutting
  • maximum stability of the blades under load by inductive hardening
  • cutting edge hardness: 63-64 HRC
  • for medium hard wire, steel wire (tensile strength 1600 N/mm²)
show more show less
  • maximum stability under load of the blades by inductive hardening
  • cutting edge hardness: 65 HRC
  • for copper and aluminium wire
  • gunmetal-finish
  • 2-colour-multilayer safety handles isolation (yellow, red) for easy identification of insulation damages
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
  • ELORA-high grade tool steel C60 / 1.0601
  • with straight blade, hardened
  • with blade protector cap and pin hole
  • blade made of stainless steel, with red, impact resistant insulated handle
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
  • blade with blunt end to protect inner conductors, hardened
  • with blade protector cap and pin hole
  • blade made of stainless steel, with red, impact resistant insulated handle
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
  • with hook blade, hardened
  • with blade protector cap and pin hole
  • blade made of stainless steel, with red, impact resistant insulated handle
  • VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
  • for inserting valve spring retainer
  • metal sheet, nickel plated
  • for screwing on and off the valve inserts as well as for pushing the valve pin in tyre valves
  • plastic grip
  • 15 pcs. for following applications:
  • Variant 1 for V-belt pulleys with threaded holes
  • 1 short beam for V-belt pulleys Ø 43-120 mm
  • 1 long beam for V-belt pulley Ø 95-210 mm
  • 3 exchangeable push-pieces to use as spindle extension
  • Variant 2 for V-belt pulley without threaded holes
show more show less
  • for all fine gripping and assembly work
  • anti-glare satin finish, grooved gripping surface, serrated reaching surface
  • serrated grab surfaces, stainless, antimagnetic, acid-proof
  • ELORA-Special-Chrome-Nickel-steel
  • for all fine gripping and assembly work
  • anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
  • stainless, antimagnetic, acid-proof
  • Special-Chrome-Nickel-steel
  • for all fine gripping and assembly work
  • anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
  • stainless, antimagnetic, acid-proof
  • Special-Chrome-Nickel-steel
  • heavy duty, forged pattern
  • 3 arms with very narrow forged hooks
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle and hook ends gunmetal-finish
  • high grade tool steel
  • heavy-duty, forged pattern
  • 3 arms
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • 1080-1081: for wire of 4-28 mm Ø
  • 1082: for wire of 8-28 mm Ø
  • for precise, quick and safe stripping of all kind of round wires, round and length cut in one operation
  • blade with transparent plastic safety cover
  • hardened special purpose steel blade, black plastic handle
  • with cranked measuring intake for VG8 screw thread
  • with push-button for resetting the indicator and rotatable for zero regulation
  • measuring scale 0-10 bar, resp. 0-140 PSI
  • pressure indication in BAR and PSI
  • accuracy ± 1% of the value
  • especially suitable for tubeless tyres
  • heavy-duty pattern
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • especially suitable for truck tyres
  • heavy-duty pattern
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • for spark plugs of size 16 mm (5/8" AF)
  • to operate with tommy bar ELORA-No. 229D
  • female square drive according to DIN 3120-C 10, ISO 1174 respectively DIN 3120-C 12,5, ISO, with ball retaining groove
  • made of seamless precision tube
  • hardened, matt chrome-plated
  • high grade tool steel C45/1.0503
  • tommy bars are not included
  • to operate with tommy bar ELORA-No. 229D
  • with rubber insert 20,8 mm
  • hollow shaft made of seamless tube
  • hardened
  • matt chrome-plated
  • high grade tool steel C45/1.0503
  • tommy bars are not included
  • long version
  • with drilled hole for tommy bars
  • for use with tommy bars ELORA-No. 211
  • with QUATROLIT®-handle
  • with suspension hole
  • seamless steel tube, hardened
show more show less
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • gunmetal finished
  • black plastic-T-handle with suspension hole
  • Chrome-Vanadium 61CrSiV5 / 1.2243
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • blade matt chrome plated, tip gunmetal finished
  • black plastic-T-handle with suspension hole
  • Chrome-Vanadium 61CrSiV5 / 1.2243
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • blade matt chrome plated, tip gunmetal finished
  • 2C T-handle with lateral drive and suspension hole
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® safety screws
  • with hole at drive end
  • blade matt chrome plated, tip gunmetal finished
  • black plastic-T-handle with suspension hole
  • Chrome-Vanadium 61CrSiV5 / 1.2243
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • blade matt chrome plated, tip gunmetal finished
  • black plastic-T-handle with suspension hole
  • TX-6 to TX-45: Chrome-Vanadium 61CrSiV5 / 1.2243
  • TX-50 and TX-60: Chrome-Vanadium 59CrV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • in plastic holder
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • Workshop display
  • for inside TORX® screws
  • blade matt chrome plated, tip gunmetal finished
  • 2C T-handle with lateral drive and suspension hole
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • plastic holder with elevating mechanism
  • for inside TORX® safety screws
  • with hole at drive end
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • metal holder, nickel plated
  • for inside TORX® safety screws
  • with hole at drive end
  • gunmetal finished
  • Chrome-Vanadium 59 CrMoV 4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • metal holder, nickel plated
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • in plastic holder
  • for inside TORX® screws
  • for use in awkward areas
  • swivel angel up to 25°
  • ball profile on the long side
  • gunmetal finished
show more show less
  • with noticeable and audible "click" mechanism
  • manually adjustable, double scale unit with Nm and ft.lb.
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • accuracy +-4% of set value
  • square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device
  • tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
  • planetary gear (1-, 2- or 3-stepped)
  • specially hardened gear wheels
  • permanent internal greasing
  • sliding bearings on drive side and power take-off side
  • overload protection (one additional sun wheel with overload cutout is included)
  • exchangeable drive heads
show more show less
  • 16 pcs.
  • in strong black storage wallet
  • 2 doors, with 2 drawers
  • lockable with cylinder lock
  • powder coated, ELORA-yellow (RAL 1006), doors black (RAL 9005)
  • stable steel sheet version
  • to operate the wheel nut wrench ELORA-No. 170
  • nickel-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • for hexagon tubular box spanners No. 210 and 217
  • hardened, chrome plated
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN 900, Form A
  • for use with construction ring spanners ELORA-No. 85
  • chrome plated
  • steel tube
  • for tubular spark plug wrench ELORA-No. 218, 219, 220
  • hardened, matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • black-painted version with wooden handle
  • ground work surfaces
  • heat treated steel
  • DIN 8350, shape C
  • black-painted version with wooden handle
  • ground work surfaces
  • heat-treated steel
  • for the repair of damaged internal and external threads
  • nickel plated
  • special steel
  • for metric-, imperial- and SAE-threads
  • with safety screw lock
  • chrome-plated
  • 2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
  • Especially suitable for car glass and domed surfaces
  • suction mechanism with security locking
  • acid- and oil resistant
  • plastic housing, suction cups made of rubber
  • for lifting and carrying material with plain, gas-tight surfaces
  • suction mechanism with security locking
  • acid- and oil resistant
  • ELORA-No. 280-40: one suction cup
  • ELORA-No. 280-80: two suction cups
  • plastic housing, suction cups made of rubber
  • for left and right hand thread
  • zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
  • high grade tool steel C45 / 1.0503
  • for removing oil filters and clamping of round shaped parts
  • max. parts diameter 160 mm
  • non-slip fibre ribbon, width 22 mm
  • plastic coated grip
  • high grade tool steel
  • for removing oil filters and clamping of round shaped parts
  • especially appropriate for trucks, construction and agriculture machinery
  • max. parts diameter 180 mm
  • non-slip fibre ribbon, width 50 mm
  • with 1/2" female square drive
  • high grade tool steel
  • for removing oil filters and clamping of round shaped parts
  • especially appropriate for trucks, construction and agriculture machinery
  • max. parts diameter 280 mm
  • non-slip fibre ribbon, width 25 mm
  • drop forged pattern
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208