ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719

This product is produced in Germany and is subject to the highest quality parameters from our proven partners.

  • 1080-1081: for wire of 4-28 mm Ø
  • 1082: for wire of 8-28 mm Ø
  • for precise, quick and safe stripping of all kind of round wires, round and length cut in one operation
  • blade with transparent plastic safety cover
  • hardened special purpose steel blade, black plastic handle
  • for round wire of 8-13 mm Ø (e.g. NYM 3 x 1,5 mm² up to 5x2,5 mm²)
  • for flush cutting-off even in difficult to access areas like for example distribution boxes
  • automatic adjustment of the cutting depth
  • hardened special purpose steel blades, black plastic handle
  • for wire diameter 0,2-6,0 mm²
  • automatic adjustment to wire diameter
  • with length stop for stripping length from 5-12 mm
  • integrated side cutter for wire up to Ø 2,0 mm
  • blades made of hardened special steel
  • black plastic handles
  • for wire cross section 0,5-6,0 mm²
  • for automatic stripping of inner conductors
  • with scale for stripping length from 5-12 mm
  • integrated side cutter
  • blades made of hardened special steel
  • black plastic handles
  • 2 doors, with 2 drawers
  • lockable with cylinder lock
  • powder coated, ELORA-yellow (RAL 1006), doors black (RAL 9005)
  • stable steel sheet version
  • high comfort due to high foam quality
  • carrying and hanging handle
  • washable
  • oil and water-resistant
  • made of XPE foam material, black and yellow
  • dimensions: 210 x 450 x 30 mm
  • with 7 drawers
  • solid metal sheet pattern, ELORA-yellow (RAL 1006)
  • corrosion- and scratch-resistant powder-coating
  • shelf space on the top made of ABS plastic with 7 storage compartments for small parts and rim on all sides
  • 200 kg shelf load capacity due to strengthened top cover
  • solid handlebar, mounting possible on both sides
show more show less
  • with 8 drawers
  • solid metal sheet pattern, ELORA-yellow (RAL 1006)
  • corrosion- and scratch-resistant powder-coating
  • shelf space on the top made of ABS plastic with 7 storage compartments for small parts and rim on all sides
  • 200 kg shelf load capacity due to strengthened top cover
  • solid handlebar, mounting possible on both sides
show more show less
  • 7 drawers
  • solid metal sheet pattern with solid sub construction, ELORA-yellow (RAL 1006)
  • corrosion- and scratch-resistant powder-coating
  • shelf space on the top made of ABS plastic with 7 storage compartments for small partsand rim on all sides
  • 200 kg shelf load capacity due to strengthened top cover
  • solid ergonomic steel reinforced handlebar,mounting possible on both sides
show more show less
  • completely welded steel sheet construction
  • 2 doors, with 4 height-adjustable shelves
  • load capacity 50 kg per shelve
  • doors strengthened and 3-point safety lock
  • rotary handle with cylinder lock
  • powder coated, ELORA-yellow (RAL 1006) doors black (RAL 9005)
  • 16 pcs.
  • in strong black storage wallet
  • lay-on slip joint and teeth cut-out
  • tooth inductive hardened, trap protection
  • chrome plated, polished, dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • according to DIN ISO 8976, Form A
  • quick adjustment by press a button
  • box joint
  • absolute safe, no displacement during work
  • self-locking due to gripping surfaces staggered in reverse order
  • Teeth inductive hardened, trap protection
  • chrome-plated, polished jaw
show more show less
  • quick release due to box joint teeth raster
  • absolute safe, no displacement during work
  • self-locking due to gripping surfaces staggered in reverse order
  • teeth inductive hardened, trap protection
  • chrome-plated, polished jaws
  • Chrome-Vanadium 31 CrV3 / 1.2208
  • according to DIN ISO 8976, Form C
  • for chrome and nickel plated bathroom fittings
  • with lever clamp
  • with exchangeable plastic jaws, 8mm wide
  • gunmetal-finished
  • ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
  • loosening and tightening of pipe connections with round union nuts from Ø 25 mm
  • loosening and tightening of ring lock connectors (like Canon connectors)
  • drop forged, with slip on joint, 4 adjusting positions
  • serrated jaws, jaw width 10 mm
  • chrome-plated, PVC-dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
  • loosening and tightening of pipe connections with round union nuts from Ø 25 mm
  • loosening and tightening of ring lock connectors (like Canon connectors)
  • drop forged, with slip on joint, 4 adjusting positions
  • jaw width 10 mm
  • with bolted plastic jaws
  • chrome-plated, PVC-dip insulated handles
  • ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
  • for the assembly of valve nipples in heating units for 3/8", 1/2", 3/4", 1" and 4 intermediate steps
  • with 1/2" square drive, chrome plated
  • high grade tool steel
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • for short, straight and figure cuts, small radius
  • blades additionally inductive hardened and ground, 56-59 HRC
  • adjustable, bolted joint
  • black handles, PVC dip coated, trap protection, opening spring
  • for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
  • high grade tool steel, forged
  • for continuous cuts and figure cuts
  • blades additionally inductive hardened and sharpened, 56-59 HRC
  • adjustable, bolted joint
  • black handles, PVC dip coated, trap protection, opening spring
  • for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
  • high grade tool steel, forged
  • for inside hexagon screws
  • blades nickel plated
  • with black T-Handle and suspension hole
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • sorted on metal ring
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • 0,7 up to 1,3 gunmetal finished, all other sizes nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • nickel plated
  • ELORA-Chrome-Vanadium 59 CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • for use in awkward areas
  • swivel angel up to 30°
  • ball profile on the long side
  • nickel plated
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • for use in awkward areas
  • swivel angel up to 30°
  • ball profile on the long side
  • nickel plated
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • extra long
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • extra long
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in black plastic wallet
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in plastic holder
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in black plastic wallet
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in plastic storage box
  • nickel plated
  • ELORA-Chrome-Vanadium 59 CrMoV 4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • plastic holder with elevating mechanism
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • in foldable plastic holder
  • for inside hexagon screws
  • for use in awkward areas
  • swivel angel up to 30°
  • ball profile on the long side
  • nickel plated
show more show less
  • for inside hexagon screws
  • metal holder
  • nickel plated
    ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws
  • in plastic holder
  • nickel plated
  • ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
  • DIN ISO 2936
  • in 2C-plastic holder
  • for inside hexagon screws
  • for use in awkward areas
  • swivel angel up to 30°
  • ball profile on the long side
  • nickel plated
show more show less
  • in plastic holder
  • for inside hexagon screws
  • for use in awkward areas
  • swivel angel up to 30°
  • ball profile on the long side
  • nickel plated
show more show less
  • for inside hexagon screws
  • in workshop stand
  • blades nickel plated
  • 2C T-Handle with lateral drive and suspension hole
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • for inside hexagon screws
  • blades nickel plated
  • 2C T-handle with lateral drive and suspension hole
  • ELORA-Chrome-Vanadium 59CrV4 / 1.2242
  • DIN ISO 2936
  • for inside hexagon screws with bore hole
  • nickel plated
  • Chrome-Vanadium 59CrV4 / 1.2242
  • for inside multi-point B &S and XZN screws
  • metal holder with elevating mechanism
  • nickel plated
  • Chrome-Vanadium 59CrV4 / 1.2242
  • Workshop display
  • for inside TORX® screws
  • blade matt chrome plated, tip gunmetal finished
  • 2C T-handle with lateral drive and suspension hole
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • plastic holder with elevating mechanism
  • for inside TORX® safety screws
  • with hole at drive end
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • metal holder, nickel plated
  • for inside TORX® safety screws
  • with hole at drive end
  • gunmetal finished
  • Chrome-Vanadium 59 CrMoV 4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • metal holder, nickel plated
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • in plastic holder
  • for inside TORX® screws
  • for use in awkward areas
  • swivel angel up to 25°
  • ball profile on the long side
  • gunmetal finished
show more show less
  • in plastic holder
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • gunmetal finished
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • blade matt chrome plated, tip gunmetal finished
  • 2C T-handle with lateral drive and suspension hole
  • Chrome-Vanadium 59CrMoV4 / 1.2242
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • especially suitable for tubeless tyres
  • heavy-duty pattern
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • especially appropriate for difficult to reach areas
  • forged pattern
  • throughout hardened and tempered to 42-46 HRC
  • chrome-plated
  • ELORA-Chrome Vanadium 31CrV3 / 1.2208
  • for file blades ELORA-No. 1641 (delivery without file blade)
  • adjustable pattern with clamping screw
  • Aluminium
  • for file blades ELORA-No. 1641 (delivery without file blade)
  • wood
for file holder ELORA-No. 1640 and 1640H
  • for seaming of metal sheets
  • forged, black coated
  • red dip insulated handles
  • high grade tool steel
  • for dismantling parts lying on top of each other, for centration of drill bores
  • chrome plated 4 square shaft
  • ELORA-Chrome-Vanadium 31CrV / 1.2208
  • face holder made of cast zinc
  • exchangeable faces made of impact resistant Cellulose-Acetate
  • ash handle
  • DIN 53505, 65 Shore D
  • for ELORA-No. 1660-...
  • made of impact resistant Cellulose-Acetate
  • for ELORA-No. 1660-... and 1661-...
  • ash wood
  • face holder made of cast zinc
  • exchangeable faces made of impact resistant Desmopan
  • ash handle
  • DIN 53505, 55 Shore D
  • for ELORA-No. 1661-...
  • wear- and break-resistant material Desmopan
  • with cranked measuring intake for VG8 screw thread
  • with push-button for resetting the indicator and rotatable for zero regulation
  • measuring scale 0-10 bar, resp. 0-140 PSI
  • pressure indication in BAR and PSI
  • accuracy ± 1% of the value
  • for screwing on and off the valve inserts as well as for pushing the valve pin in tyre valves
  • plastic grip
  • heavy duty pattern
  • hardened and tempered
  • high grade tool steel C45 / 1.0503
  • with straight edge and point
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • with angled edge and straight point
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • with point and claw
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • heavy duty pattern
  • with ball head and edge
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • heavy duty pattern
  • with curved edge and straight point
  • working end hardened
  • high grade tool steel C45 / 1.0503
  • drop forged hammer head
  • black, nonslip plastic handle
  • head coated and mechanically fixed
  • steel tube handle
  • head made from high grade tool steel C45 / 1.0503
  • for gentle removing of ball joint pivots on steering tie rods and stabilizers
  • zinc-plated, gunmetal-finish
  • high grade tool steel
  • drop forged hammer head
  • black, nonslip plastic handle
  • coated head, face and claw polished
  • steel tube handle
  • head made of high grade tool steel C45 / 1.0503
  • for gentle removing of ball joint pivots on steering tie rods and stabilizers
  • zinc-plated, gunmetal-finish
  • high grade tool steel
  • specially appropriated for targeted strikes (automobile industries, moulds and tool making)
  • for non-rebounding strikes without loosing power of impact and material gently work
  • strong steel center section with holding pins for the spare nylon faces
  • mass of steel shot in the hammer head exactly fine-tuned (mass inertia principle)
  • nylon striking faces, exchangeable
  • hickory handle
  • DIN 53505, 73 Shore D
  • for ELORA-No. 1690-...
  • wear- and break-resistant material Nylon
  • for loosening and tightening of wheel nuts and wheel bolts of trucks
  • forged pattern
  • additional 13/16 AF female square drive within the size of 32 mm, for operating of wheel bolts with male square drive
  • to operate with tommy bar ELORA-No. 171
  • nickel-plated
  • special tool steel
  • to operate the wheel nut wrench ELORA-No. 170
  • nickel-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • 2 legs, heavy-duty pattern, silver-coloured, puller legs to be used on both sides: one side with wide, the other side with narrow hooks
  • zinc-plated, spindles gunmetal-finish
  • high grade tool steel
  • heavy forged pattern
  • 2 arms
  • by turning the puller hooks usable as external and internal puller
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • heavy-duty, forged pattern
  • 2 arms, with very narrow forged pulling hooks
  • especially suitable for difficult to reach areas
  • zinc-plated, spindle and pulling hook end gunmetal-finish
  • high grade tool steel
  • 2 arms with 3 pairs of hooks in different lengths
  • especially suitable for difficult to reach areas
  • zinc-plated, spindle and pulling hook end gunmetal-finish
  • high grade tool steel
  • for pulling off battery terminals, ball bearings, gear-wheels, etc.
  • 2 arms
  • 10 mm wrench size
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for pulling off battery terminals, ball bearings, gear-wheels, etc.
  • 2 arms
  • 12 mm wrench size
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for pulling off battery terminals, ball bearings, gear-wheels, etc.
  • 3 arms
  • 12 mm wrench size 12 mm
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for vehicle hubs with a bolt circle diameter up to 225 mm
  • pulling legs movable and replaceable
  • nickel-plated, spindle gunmetal-finish
  • Chrome-Vanadium 31CrV3 / 1.2208
  • for pulling off ball bearings, gear-wheels, discs, etc.
  • heavy-duty, forged pattern
  • 2 arms
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for pulling off ball bearings, gear-wheels, v-belt pulley etc.
  • heavy-duty, forged pattern
  • 3 arms
  • zinc-plated, spindle gunmetal-finish
  • high grade tool steel
  • for left and right hand thread
  • zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
  • high grade tool steel C45 / 1.0503
  • scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
  • laminated beech wood (Multiplex) work bench board
  • drawers with ball-bearing guide rails, full telescopic drawer slide
  • 6 drawers with roller bearing, internal dimensions of drawers: width 573 x Depth 410
  • individual separation using length- and cross dividers, resp. using ELORA OMS-modules
  • central locking with mutual drawer locking
show more show less
  • bent pattern with hub cap puller
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • especially suitable for truck tyres
  • heavy-duty pattern
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • for removing oil filters and clamping of round shaped parts
  • max. parts diameter 160 mm
  • non-slip fibre ribbon, width 22 mm
  • plastic coated grip
  • high grade tool steel
  • for removing oil filters and clamping of round shaped parts
  • especially appropriate for trucks, construction and agriculture machinery
  • max. parts diameter 180 mm
  • non-slip fibre ribbon, width 50 mm
  • with 1/2" female square drive
  • high grade tool steel
  • for removing oil filters and clamping of round shaped parts
  • especially appropriate for trucks, construction and agriculture machinery
  • max. parts diameter 280 mm
  • non-slip fibre ribbon, width 25 mm
  • drop forged pattern
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • for all common oil-, fuel filter and round couplings
  • with adjustable steel band
  • plastic coated grip
  • nickel-plated
  • for loosening and tightening of wheel nuts and wheel bolts of trucks and tractors
  • heavy-duty pattern
  • matt chrome-plated
  • Chrome-Vanadium 31CrV3 / 1.2208
  • pattern according to DIN 3119, ISO 6788