Made in Germany

1640
Adjustable File Holder

Details

for file blades ELORA-No. 1641 (delivery without file blade)
adjustable pattern with clamping screw
Aluminium

890-V...
Adjustable Hook Wrenches with Nose

Details

for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
special steel, hardened
gunmetal finished
high grade tool steel

892-...
Adjustable Pin Wrench

Details

for nuts with two holes according to DIN 547, spring flange and flange nuts according to DIN 44716
gunmetal finished
high grade tool steel
according to DIN 3116

961-...
Adjustable Wrench

Details

jaw set at 15°
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
chrome plated
handle insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

507A-...
Aluminium C-Clamp Grip Pliers

Details

for clamping of profile material with high racks and for work on bulky work pieces
the light alloy avoids the adhering of welding beads
approx. 40% weight reduction for better handling in continuous operation
quick release lever with return spring
nickel-plated
jaws made of heavy-duty light metal alloy

294
Anti-Freeze Tester

Details

for quick and accurate testing of the freezing point temperature of the coolant liquid at any outside temperature
with 360° rotatable twin measuring element
aspirate ball made of elastomer, stays elastic and full functional at any outside temperature
hydrostatic block automatically avoids any leakage or reflow of air
made of robust technical plastics

1094
Automatic Wire Stripper

Details

for wire diameter 0,2-6,0 mm²
automatic adjustment to wire diameter
with length stop for stripping length from 5-12 mm
integrated side cutter for wire up to Ø 2,0 mm
blades made of hardened special steel
black plastic handles

586
Automotive Light Tester

Details

10 mm long probe tip
with protection cap
cable with alligator clamp
for voltage testing from 6-24 V
not for use on vehicles with electrical components
in a plastic bag

4490
Bag or Wire Twister

Details

for fast and efficient closing of connecting tyre levers
with moulded plastic grip

243MB
Balance Weight Plier

Details

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

159S-KUB
Ball End Hexagon Key Set, extra long

Details

in foldable plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

159SKU
Ball End Hexagon Key Set, extra long

Details

in 2C-plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

159SKU E
Ball End Hexagon Key Set, extra long

Details

in plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

159KUA-...
Ball End Hexagon Key, extra long, inch

Details

for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159KU-...
Ball End Hexagon Key, extra long, metric

Details

for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

287
Battery Acid Filler

Details

for filling conventional batteries with screw caps
with rubber ball and PVC tube
acid-resistant

277
Battery Acid Tester

Details

for testing the acid density on conventional batteries with screw caps
with areometer

252
Battery Terminal Brush

Details

with external round brush to clean the cable clamps and internal brush for cleaning battery terminals
packed in plastic box

174-50
Battery Terminal Puller

Details

for pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
10 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

174-80/2
Battery Terminal Puller

Details

for pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
12 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

174-80/3
Battery Terminal Puller

Details

for pulling off battery terminals, ball bearings, gear-wheels, etc.
3 arms
12 mm wrench size 12 mm
zinc-plated, spindle gunmetal-finish
high grade tool steel

270
Battery Tester

Details

for diagnostics of the charging system and the voltage status of car and motorcycle batteries
measuring range 6 and 12 Volt up to 1000 CCA
easy to read scale, for up to 100 Ampere

273-...
Bearing Scraper or Hollow Ground Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat-treated steel

286-...
Belt Punch

Details

for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
high grade steel
according to DIN 7200, Form B

284-250
Berlin Pattern Tin Snip

Details

for long straight cuts
blades additionally inductive hardened and ground, 56-58 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

3436-S36
Bit-Box 1/4"

Details

36 pcs.
in black yellow plastic box with belt clip and suspension hole
magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3
bits made of ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
35 bits with male hexagon drive according to DIN 3126 C 6,3
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

4150-...
Bitholder 1/4"

Details

bit lock with permanent magnet resp. spring clips
with stainless steel sleeve, diameter 9,5 mm
female hexagon drive according to DIN 3126- D 6,3
male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
according to DIN 7427 Form D

288-...
Bolt Cutter

Details

inductive hardened jaws on the cutter head
cutting capacity up to 48 HRC hardness
easy and precise readjusting with double eccentric screws
limbs made of steel tube with plastic handles
jaws made of special high grade tool steel
according to DIN ISO 9242

302
Brake Piston Reset Tool

Details

for resetting the pistons in brake disc callipers without screw thread reset adjuster
suitable for all common types of vehicles
nickel-plated, jaws gunmetal-finish
high grade tool steel C45 / 1.0503

480-340
Brake Spring Plier

Details

for removing and replacing of brake shoe return springs in drum brakes
with a moveable claw, especially suitable for glued brake linings
nickel-plated, with black coated handles
Chrome-Vanadium 59CrV4 / 1.2242

480-...
Brake Spring Pliers

Details

for removing and replacing of brake shoe return springs in drum brakes
especially suitable for riveted brake linings
nickel-plated
Chrome-Vanadium 59CrV4 / 1.2242

362-...
Bricklayer´s Chisel, flat oval

Details

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7254 Form A

293
Brush for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
narrow, bent pattern
plastic handle
bristles made of corrugated steel wire

293BS
Brush for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
narrow pattern, width 12 mm
bristles made of straight steel wire
2C-handle

509-500
C-Clamp Grip Plier

Details

for clamping of profile material with high racks and for work on bulky work pieces, especially appropirate for metal construction and car body work
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

507-...
C-Clamp Grip Pliers

Details

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
extension made of ST37-2

507-165/165S
C-Clamp Grip Pliers

Details

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of C1045

507-280/280S
C-Clamp Grip Pliers

Details

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

466A-...
Cable End Sleeve Pliers

Details

for pressing of end-sleeves according to DIN 46228 part 1 and 4
with side cutter and wire stripping mechanism for soft wire
red handles, PVC dip insulated
ELORA-high grade steel C45 / 1.0503

261-...
Cape Chisel, flat oval

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6453

1641-...
Carbody File Blades

Details

for file holder ELORA-No. 1640 and 1640H

1678
Carpenter

Details

drop forged hammer head
black, nonslip plastic handle
head coated and mechanically fixed
steel tube handle
head made from high grade tool steel C45 / 1.0503

321-...
Carpenters

Details

for highest operational demands
inductive hardened cutting blades
cutting blades hardness 61-63 HRC
gunmetal-finish, ground head
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 9243 Form A

265-...
Centre Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 7250

524-...
Chain Grip Plier

Details

for clamping of any shaped profile, especially appropriate in narrow and difficult to reach areas like oil filters, exhaust pipes, etc.
ELORA-No. 524E is an extension as well as spare chain at the same time
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

266K
Chisel and Punch Set

Details

6 pcs.
in metal box
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

266KS
Chisel and Punch Set

Details

6 pcs.
in plastic holder
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

266S
Chisel and Punch Set

Details

6 pcs.
in wooden holder
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

260-S5
Chisel Set

Details

5 pcs.
in black plastic rolling pouch
completely hardened and tempered
striking heads inductive tempered
working edges ground and oiled
shafts black lacquered
ELORA-Chrome-Vanadium 59CrV / 1.2242
according to DIN 6453

show more show less

469
Circlip Plier for external retaining rings

Details

for external retaining rings without holes
straight jaws, self-opening due to mounted double leaf spring
chrome-plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

304-S4
Circlip Plier Set

Details

4 pcs.
carton box packed
red dip insulated handles

404-S41
Circlip Plier Set

Details

4 pcs.
carton box packed
chequered handles
chrome-plated, polished joint

404-S8
Circlip Plier Set

Details

8 pcs.
assortment in convenient plastic case
chrome plated, polished joint, chequered handles

384-A0-A4
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

384-A01-A41
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

474-A1-4
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted double leaf spring
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

474-A11-41
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted double leaf spring
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

383-J1-J4
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

383-J11-J41
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

473-J 1-4
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

473-J 11-41
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

291-...
Claw

Details

for gripping small parts in hard to reach places
with flexible shaft, Ø 7mm
steel stem, operating piece made of plastic

1680-330
Claw Hammer

Details

drop forged hammer head
black, nonslip plastic handle
coated head, face and claw polished
steel tube handle
head made of high grade tool steel C45 / 1.0503

244-C
Clic-Hose Clamp Plier

Details

for CLIC-Hose clamps on fuel feed pipes(e.g. VW, Audi, Peugeot)
opening and closing of the hose clamps by turning the Plier 180°
with fix jaws, bent by 90°
span width 20 mm
nickel-plated, joint gunmetal-finish
high grade tool steel

395-...
Combination Pliers

Details

strong edition for tough conditions
maximum stability under load of the blades by inductive hardening
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

495-BI...
Combination Pliers, German pattern

Details

strong edition for tough conditions
lay on cutter box for better cutting
maximum stability under load by inductive hardening of the blades
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

499-...
Concreters

Details

Mechanic's wipper for heaviest action
inductive hardened cutting blade, cutting edge hardness 61-63HRC
gunmetal-finish, ground head
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 9242 Form A

85A-...
Construction Ring Spanner, inch

Details

heavy, deep cranked pattern
for use with tommy bar tubes ELORA-No. 855
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

85M-...
Construction Ring Spanner, metric

Details

heavy, deep cranked pattern
for use with tommy bar tubes ELORA-No. 855
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

85S.../85L...
Construction Ring Spanner-Sets

Details

heavy, deep cranked pattern
matt chrome plated
on yellow metal display board
Size: 895 x 725 mm
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

249
Contact File

Details

for cleaning and adjusting of spark plug contacts
Cut 2 second
high grade tool steel C45/1.0503

249-S6
Contact File Set

Details

6 pcs.
for cleaning and adjusting of spark plug contacts
in a plastic storage wallet
Cut 2, second
high grade tool steel C45/1.0503

373-...
Counter Supports

Details

counter support for internal extractor ELORA-No. 372
zinc-plated, spindle gunmetal-finish
high grade tool steel

263-...
Cross-Cut Chisel, octagonal

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

241SB-...
Cutting and Flaring Sets

Details

3 pcs.
for beading of copper and light alloy tubes
flaring cone 90 ° hardened, corresponds to 45 ° at the tube
body made of zinc die-cast
jaws made of steel, smooth inside, phosphated
pipe cutter with a cutting wheel and two guide rollers
ergonomic rotary knob with integrated trim knife
painted, gunmetal finished spindle
cutting wheel made of high alloy special steel

show more show less

1690-...
Dead-Blow Nylon Soft Faced Hammer

Details

specially appropriated for targeted strikes (automobile industries, moulds and tool making)
for non-rebounding strikes without loosing power of impact and material gently work
strong steel center section with holding pins for the spare nylon faces
mass of steel shot in the hammer head exactly fine-tuned (mass inertia principle)
nylon striking faces, exchangeable
hickory handle
DIN 53505, 73 Shore D

253
Door Panelling Extraction Plier

Details

for dismounting of the securing clips on door panelling, garnish mouldings and bumpers
nickel-plated, jaws and joint gunmetal-finish
high grade tool steel

290-1
Door Panelling Extraction Tool

Details

for dismounting of the securing clips
jaw open 6 mm
zinc-plated, black plastic handles
high grade tool steel
matt chrome-plated

227
Drain Plug Wrench

Details

for loosening and tightening of oil female square drive screws
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

264-...
Drift Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

264K
Drift Punch Set

Details

6 pcs.
in metal box
completely hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

show more show less

264KS
Drift Punch Set

Details

6 pcs.
in plastic holder
completely hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

show more show less

365-...
Electrician

Details

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

404-S4
Electrician's Plier Set

Details

4 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

649-IS...
Electricians Screwdriver

Details

for plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

625-KU...ESD
Electronic Ball End Screwdriver ESD

Details

for inside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

4740
Electronic Flat Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
straight, long jaws, flat tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

4710-...
Electronic Flat Nose Pliers ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
straight, short jaws, flat tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH= smooth gripping surface, without cut
MH= serrated gripping surface, with cut
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

5300-ST
Electronic Gripping Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5220-ST, 5290-ST
Electronic Gripping Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5200-ST
Electronic IC-Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, with IC-tip
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-Stainless steel

4580-...
Electronic Oblique Cutter ESD

Details

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4590
Electronic Oblique Cutter ESD

Details

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
wide head, long cutting edges, with fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4570
Electronic Oblique Tip Cutter ESD

Details

for virtually flush cutting of thin, soft wires in places difficult to access, for work with electrostatic endangered components
extra narrow head, fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-Chrome-Vanadium 80CrV2 / 1.2235
DIN ISO 9654, ESD: DIN IEC 614340-5-1

5160-ST, 5240-ST
Electronic Positioning Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, extremely fine, straight tips, grooved gripping and grab surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5130-ST
Electronic Positioning Tweezers

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5110-ST
Electronic Positioning Tweezers

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5120-ST
Electronic Positioning Tweezers

Details

for all fine gripping and assembly work
for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, tips angled 90°, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5210-ST
Electronic Positioning Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, inside vertical concave, until Ø 2mm, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

4720
Electronic Round Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
short jaws, round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

600-IS...
Electronic Screwdriver

Details

for plain slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

610-PH...
Electronic Screwdriver

Details

for cross slotted screws
dull chrome plated blade with grey tip, 2-C handle with revolving end-cap, non-slip resistant micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 75MoV5 / 1.2381

612-PZ...
Electronic Screwdriver

Details

for cross slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

620-TX...
Electronic Screwdriver

Details

for inside TORX®screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

600-IS...ESD
Electronic Screwdriver ESD

Details

for plain slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

610-PH...ESD
Electronic Screwdriver ESD

Details

for cross slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

620-TTX...ESD
Electronic Screwdriver ESD

Details

suitable for smallest inside TORX®screws with locking pin, for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

620-TX...ESD
Electronic Screwdriver ESD

Details

for smallest inside TORX®screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

625-...ESD
Electronic Screwdriver ESD

Details

for inside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

616-S6
Electronic Screwdriver Set

Details

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

617-S6
Electronic Screwdriver Set

Details

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

618-S6
Electronic Screwdriver Set

Details

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

432
Electronic Side Cutter

Details

oval head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finished, polished head
ELORA-high grade tool steel C60 / 1.0601

435
Electronic Side Cutter

Details

pointed head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finish, polished head
ELORA-high grade tool steel C60 / 1.0601

4510
Electronic Side Cutter ESD

Details

for cutting in places difficult to access, for work with endangered electronic components
pointed, narrow head, small version with fine bevel, maximum stability under load of the cutting edges by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4520-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finished, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4530-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
oval head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4550-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4560
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4760
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹
cutting edge hardness 61-63 HRC
ELORA -high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4540
Electronic Side Cutter with Wire Trapping Spring ESD

Details

with trapping wire to cut off wire, for all work with electrostatic endangered components
oval head with wire trapping spring, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

5370-ST
Electronic SMD Reverse Action Tweezers

Details

for handling of SMD´s on PCB´s, SOT packages and monolithic chips
anti-glare satin finish, smooth gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-Stainless steel

4670
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, short jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

4680
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

4690
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, straight long jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

4700
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
very fine, slim, long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

4660-...
Electronic Snipe Nose Pliers ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
short, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH = smooth gripping surface
MH = serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

630-...ESD
Electronic Socket Spanner ESD

Details

for outside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶ – 10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

4640
Electronic Tungsten Carbide Oblique Cutter ESD

Details

for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4620
Electronic Tungsten Carbide Side Cutter ESD

Details

for cutting very hard materials with coincident maximum stability under load, for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load due to carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4630
Electronic Tungsten Carbide Side Cutter ESD

Details

for cutting very hard wires which are difficult to access, for all work with electrostatic endangered components
pointed, narrow head with groove and fine bevel, small version, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

5260-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5280-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5330-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5350-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, smooth gripping surfaces, flat, extreme fine, long tips
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5340-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5270-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5350-STE
Electronic Tweezer ESD

Details

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, flat, extremely long, fine tips, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5250
Electronic Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, rectangular, smooth gripping and grab surfaces, 2 mm width
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5160-STE, 5240-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, extremely fine, straight tips, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5330-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
satin antiglare black finish, smooth gripping surfaces, surface resistance 10⁶ - 10⁹ Ohm, antimagnetic, acid-proof, stainless
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5340-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
satin antiglare black finish, smooth gripping surfaces, surface resistance 10⁶ - 10⁹ Ohm, antimagnetic, acid-proof, stainless
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

4770
Electronic Wire Stripping Plier ESD

Details

for wire stripping of PVC, Teflon etc., for work with electrostatic endangered components
brass adjustment screw inside jaws, inlaid joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
ELORA-high grade tool steel C45 / 1.0503
ESD: DIN IEC 61340-5-1

4730
Elektronik Seitenschneider ESD

Details

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

OMS-9L
Empty Module

Details

empty module for OMS-9
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-15L
Empty Module

Details

empty module for OMS-15
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-26L
Empty Module

Details

empty module for OMS-26
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-3L/4L
Empty Module

Details

empty module for OMS-3 and 4
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-31L
Empty Module

Details

empty module for OMS-31
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-24L
Empty Module

Details

empty module for OMS-24
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-17L
Empty Module

Details

empty module for OMS-17
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-51L
Empty Module

Details

empty module for OMS-51
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-27L
Empty Module

Details

empty module for OMS-27
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-30L
Empty Module

Details

empty module for OMS-30
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-8L
Empty Module

Details

empty module for OMS-8
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-47L
Empty Module

Details

empty module for OMS-47
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-43L
Empty Module

Details

empty module for OMS-43
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-35L/25L
empty Module

Details

empty module for OMS-35 and 25
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 37,7 cm
hard foam insert

OMS-22L
Empty Module

Details

empty module for OMS-22
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-54L
Empty Module

Details

empty module for OMS-54
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-11L/38L
Empty Module

Details

empty module for OMS-11 and 38
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-48L
Empty Module

Details

empty module for OMS-48
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-50L
Empty Module

Details

empty module for OMS-50
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-18L
Empty Modules

Details

empty module for OMS-18
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

600-S15
ESD Set

Details

15 pcs.
in black plastic box with 2-colour foam material
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

974-...
Extension Bars 1/2"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

967-...
Extension Bars 3/8"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

250FB
File Brush

Details

working area 250 x 40 mm
rugged wooden handle with wear-resistant steel wire spiked band

292
File for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
rough milled
2-C-handle
Tool steel 140Cr3/1.2008

292-1
File for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
4-sides rough milled
2-C-handle
Tool steel 140Cr3/1.2008

1640H
File Holder for Car Body Files

Details

for file blades ELORA-No. 1641 (delivery without file blade)
wood

190-...
Filter Wrench

Details

for all common oil-, fuel filter and round couplings
with adjustable steel band
plastic coated grip
nickel-plated

260-...
Flat Chisel, flat oval

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6453

262-...
Flat Chisel, octagonal

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

376-160
Flat Nose Plier

Details

for holding and bending
long, flat jaws, rippled serrated surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

374-2
Flat Nose Plier, angled pattern

Details

extra-long for difficult to access areas
grooved gripping surfaces
ground, with dip insulated, black handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

476-BI...
Flat Nose Pliers

Details

for holding and bending
short jaws, serrated gripping surface
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

237-...
Flexible Magnetic Lifter

Details

for lifting small parts in hard to reach places
with flexible shaft
Shaft made of steel
2-C QUATROLIT handle with hanging hole

195CV-...
Four Way Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and wheel bolts of trucks and tractors
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

195CV-17, 195CV-5/8
Four Way Wheel Nut Wrench

Details

for cars, light trucks and agricultural machinery
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

196-...
Four Way Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and bolts of trucks, tractors and construction machinery
heavy-duty pattern due to forged centrepiece
dimensions: 750 x 750 mm
additional 13 / 16” female square within the size 32 mm for operating of wheel nuts with male square
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

463
Glow Plug Plier

Details

straight edition
for plugging on and pulling down of deep-seated glow plugs
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

500G-250
Grip Plier, straight jaws

Details

for flat material
with adjustment screw
quick release lever with return spring
forged, hardened and tempered straight jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

500-...
Grip Pliers with wire cutter, curved jaws

Details

for round and flat material
with adjustment screw
quick release lever with return spring
forged, hardened and tempered half-round jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

257-PS
Hacksaw Blade Set

Details

in carton box
to use with Hacksaw Frames ELORA-No. 257-...
specially hardened version with eyelets

257-...
Hacksaw Blades, Flexible wire saw

Details

to use with Hacksaw Frames ELORA-No. 257-...
specially hardened version with eyelets

257-110
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-50
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-55
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

3415
Hand Bit Holder 1/4"

Details

bit lock with permanent magnet
nonslip QUATROLIT®-2C-handle
with suspension hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female hexagon drive according to DIN 3126 D 6,3, DIN ISO 1173

283HS
Hand Guard

Details

hand protection against impacts
no rolling away due to octagonal shape
suitable for all ELORA chisels, except ELORA-No. 361
flat oval 20 x 12, 23 x 13, 26 x 13 mm
octagonal 16, 18, 20 mm
made from impact resistant special rubber

361HS
Hand Guard for Slit or Car Body Chisel

Details

hand protection against impacts
no rolling away due to octagonal shape
only for ELORA-No. 361
made of impact resistant special rubber

385
Hand Lever Grease Gun

Details

high-quality industrial design with short stroke
continuous fixation, air release valve on the pump head
fat lead by means of spring force in the press head
dummy lubrication excluded
Working pressure 400 bar, test pressure 800 bar, capacity about 1.9 cc / stroke
filling can be done with bulk grease (500cc) or cartridge (400g)
incl. reinforced hose (1000 bar burst pressure) and hollow nozzle
housing made of steel, painted silver, black plastic handle

show more show less

1660ST-...
Handles for Soft Faced Hammer

Details

for ELORA-No. 1660-... and 1661-...
ash wood

485-BI
Heavy Duty End Cutter

Details

maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
similar DIN ISO 5748

389-...
Heavy Duty Side Cutter

Details

high cutting performance with minimal effort
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

490-BI...
Heavy Duty Side Cutter

Details

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

959-L...
Hexagon Key

Details

for inside hexagon screws
nickel-plated
ELORA-Chrome-Vanadium steel
DIN ISO 2936
2-color-multilayer insulation (yellow, red) for easy identification of insulation damages
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

159S-8P
Hexagon Key Set

Details

for inside hexagon screws
in plastic storage box
nickel plated
ELORA-Chrome-Vanadium 59 CrMoV 4 / 1.2242
DIN ISO 2936

159SW
Hexagon Key Set

Details

for inside hexagon screws
in workshop stand
blades nickel plated
2C T-Handle with lateral drive and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

158R-...
Hexagon Key Sets

Details

for inside hexagon screws
sorted on metal ring
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-KK...
Hexagon Key Sets

Details

for inside hexagon screws
plastic holder with elevating mechanism
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159SK-...
Hexagon Key Sets

Details

for inside hexagon screws
metal holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159SK-9M, 159SK-10M
Hexagon Key Sets

Details

for inside hexagon screws
in plastic holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-...L
Hexagon Key Sets, extra long, metric

Details

for inside hexagon screws
in plastic holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-...A
Hexagon Key Sets, inch

Details

for inside hexagon screws
in black plastic wallet
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-...M
Hexagon Key Sets, metric

Details

for inside hexagon screws
in black plastic wallet
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159Z-...
Hexagon Key with pin

Details

for inside hexagon screws with bore hole
nickel plated
Chrome-Vanadium 59CrV4 / 1.2242

155-...
Hexagon Key with T-Handle

Details

for inside hexagon screws
blades nickel plated
with black T-Handle and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
DIN ISO 2936

159W-...
Hexagon Key with T-Handle

Details

for inside hexagon screws
blades nickel plated
2C T-handle with lateral drive and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
DIN ISO 2936

956-L...
Hexagon Key with T-Handle

Details

for inside hexagon screws
gunmetal finished
ELORA-Chrome-Vanadium steel
DIN ISO 2936
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

159LA-...
Hexagon Keys, extra long, inch

Details

for inside hexagon screws
extra long
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159L-...
Hexagon Keys, extra long, metric

Details

for inside hexagon screws
extra long
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159A-...
Hexagon Keys, inch

Details

for inside hexagon screws
nickel plated
ELORA-Chrome-Vanadium 59 CrMoV4 / 1.2242
DIN ISO 2936

159-...
Hexagon Keys, metric

Details

for inside hexagon screws
0,7 up to 1,3 gunmetal finished, all other sizes nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

214-...
Hexagon Nut Driver with T-Handle

Details

short and long type
plastic T-handle with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

213-...
Hexagon Nut Driver, flexible

Details

nonslip QUATROLIT®-2K-handle
with suspension hole
limited torque!
chrome plated

216A-...
Hexagon Nut Driver, long, inch

Details

long version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3125, ISO 2725-1

216-...
Hexagon Nut Driver, long, metric

Details

long version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3125, ISO 2725-1

215-...
Hexagon Nut Driver, short

Details

short version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

210A-...
Hexagon Tubular Box Spanner, inch

Details

for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

210M-...
Hexagon Tubular Box Spanner, metric

Details

for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube, hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

210S...AF
Hexagon Tubular Box Spanner-Sets, inch

Details

carton box packed
for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

show more show less

210S...M
Hexagon Tubular Box Spanner-Sets, metric

Details

carton box packed
for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

show more show less

890-VG...
Hinged Hook Wrench with Nose

Details

Short design, fits in every pocket and toolbox
for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
high grade tool steel, hardened
gunmetal finished

276-...
Hollow Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat treated steel
DIN 8350, shape A

890-...
Hook Wrench with Nose

Details

for grooved nuts according to DIN 1804, antifriction bearing bolt, according to DIN 981
gunmetal finished
rounded edges for better handling
high grade tool steel
according to DIN 1810, Form A

891-...
Hook Wrench with Pin

Details

for nuts with radial holes according to DIN 1816 and DIN 548
rounded edges for better handling
gunmetal finished
high grade tool steel
according to DIN 1810, Form B

244-1
Hose Clamp Plier

Details

for simple self spanning wire hose clamps (e.g. washing machines)
lockable in 3 positions
nickel-plated
jaws made of high grade tool steel C45 / 1.0503

244-2
Hose Clamp Plier

Details

for simple self spanning wire hose clamps (e.g. washing machines)
with rotable jaws
clamping range 40 mm
nickel plated
jaws made of high grade tool steel C45 / 1.0503

244-3
Hose Clamp Plier

Details

for spring band clamps e.g. for VW, Audi and Opel
with rotatable jaws
clamping range 6-12 mm
nickel-plated
jaws made of high grade tool steel C45 / 1.0503

244-4
Hose Clamp Plier

Details

for mounting of self spanning, spring strip and space-saving clamp
for clamps Ø 7-60 mm
due to bowden cable operating mechanism (610 mm) suitable for difficult to reach areas
nickel-plated, joint gunmetal-finish
high grade tool steel

175-...
Hub Puller

Details

for vehicle hubs with a bolt circle diameter up to 225 mm
pulling legs movable and replaceable
nickel-plated, spindle gunmetal-finish
Chrome-Vanadium 31CrV3 / 1.2208

315
Hydraulic Nut Splitter

Details

to split fixed or overtightened nuts up to strength class 10
Hydraulic execution
gunmetal finished spindle
High grade tool steel C45 / 1.0503

316
Hydraulic Nut Splitter

Details

to split fixed or overtightened nuts up to strength class 10
hyraulic execution
high grade tool steel C45 / 1.0503

502-...
Ideal Grip Pliers

Details

for round, profile and flat material
combined jaw shape
with adjustment screw and release lever
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

484L / 484R
Ideal Lever Tin Snips

Details

for short, straight and figure cuts, big radius
with leverage
self-opening due to mounted leaf spring, with lock
burr-free cut
adjustable, bolted joint
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground, 60-62 HRC
with plastic handles and trap protection
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1,2 mm with a tensile strength of 600 N/mm²
high grade tool steel, forged

show more show less

1484-...
Ideal Tin Snips

Details

for continuous cuts and figure cuts
blades additionally inductive hardened and sharpened, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

295
Inspection Mirror

Details

for inspecting hard to see locations
round mirror with metal frame
with flexible shaft
shaft made of steel
2-C QUATROLIT handle with hanging hole

298
Inspection Set with Quick Change Chuck

Details

5-pieces set
Telescopic shaft with quick change chuck for holding mirror, magnifying glass or magnets
packed in a sturdy plastic case

372-...
Internal Extractor

Details

for extracting close-fitting ball-bearings over the inner bearing ring
to use with counter support ELORA-No. 373
gunmetal-finish
high grade tool steel

372S9
Internal Extractor Set

Details

9 pcs.
for extracting ball-bearings, ball-bearingrings and bushinger with a bore diameter of Ø 10–75 mm
high grade tool steel
in black plastic box with plastic foam insert

168-...
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated, gunmetal-finish
high grade tool steel

169-...
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated, gunmetal-finish
high grade tool steel

323-...
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
suitable for difficult to reach areas
zinc-plated, gunmetal-finish
high grade tool steel

328
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated
high grade tool steel

257-A
Junior Hacksaw Frame

Details

with adjustable wooden handle
for marquetry (Coping) saw blades and rod saw blades with 150 mm length
incl. coping saw blade ELORA-No. 257-S
Hacksaw frame made of steel

257-F
Junior Hacksaw Frame

Details

with fixed red laquered wooden handle
for marquetry (Coping) saw blades and rod saw blades with 150 mm length
incl. coping saw blade ELORA-No. 257-S
Hacksaw frame made of steel

400B-...
Letter Punch Sets

Details

27 pcs.
for driving letters by impact into steel
27 capital letters, from A to Z and ''&''
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

508-...
Long Nose or Crow Nose Pliers

Details

to clamp or remove round, profile and flat material in narrow and deep sections for e.g. motors, control cabinets etc.
long, slim jaws with burner hole
quick release lever with return spring
drop-forged, nickel-plated
jaws made of C1045