Made in Germany

OMS-9L
Empty Module

Details

empty module for OMS-9
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-8L
Empty Module

Details

empty module for OMS-8
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-7
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-6
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-54L
Empty Module

Details

empty module for OMS-54
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-51L
Empty Module

Details

empty module for OMS-51
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-50L
Empty Module

Details

empty module for OMS-50
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-48L
Empty Module

Details

empty module for OMS-48
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-48
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-47L
Empty Module

Details

empty module for OMS-47
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 57,3 cm
hard foam insert

OMS-43L
Empty Module

Details

empty module for OMS-43
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-43
Module VDE Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-42L
Module-VDE Pliers

Details

empty module for OMS-42
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-42
Module-VDE Pliers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-3L/4L
Empty Module

Details

empty module for OMS-3 and 4
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-38
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-37
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-36L/37L
Module-QUATROLIT®-2C-Screwdrivers

Details

empty module for OMS-6 | 7 | 36 | 37
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-36
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-35L/25L
empty Module

Details

empty module for OMS-35 and 25
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 37,7 cm
hard foam insert

OMS-31L
Empty Module

Details

empty module for OMS-31
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-30L
Empty Module

Details

empty module for OMS-30
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-27L
Empty Module

Details

empty module for OMS-27
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-27
Module-TORX

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-26L
Empty Module

Details

empty module for OMS-26
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-26
Module Hexagon Key Set

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-24L
Empty Module

Details

empty module for OMS-24
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-23L
Module-Impact-Socket Set 3/4

Details

empty module for OMS-23
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-22L
Empty Module

Details

empty module for OMS-22
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-20L
Module-Circlip Plier

Details

empty module for OMS-20
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-20
Module-Circlip Plier

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-1L
Module-Combination Spanners, cranked

Details

empty module for OMS-1
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-19L
Module-Double-Ended Ring Spanner

Details

empty module for OMS-19
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-18L
Empty Modules

Details

empty module for OMS-18
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-17L
Empty Module

Details

empty module for OMS-17
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-17
Module Engineer Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-16L
Module Engineer Screwdrivers

Details

empty module for OMS-16
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-16
Module Engineer Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-15L
Empty Module

Details

empty module for OMS-15
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

OMS-11L/38L
Empty Module

Details

empty module for OMS-11 and 38
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-11
Module-QUATROLIT®-2C-Screwdrivers

Details

for ELORA-roller tool cabinets
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

OMS-10L
Module-Pliers

Details

empty module for OMS-10
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

MS-41
Module-Engineer Screwdriver

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-40
Module-Engineer Screwdriver

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-39
Module-QUATROLIT®-2C-Screwdriver

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-38
Module-QUATROLIT®-2C-Screwdriver

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-37
Module-QUATROLIT®-2C-Screwdriver

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-36
Module-QUATROLIT®-2C-Screwdriver

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-32
Module-VDE-Screwdrivers

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-26
Module-Circlip Pliers

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-25
Module-Profi Classic Circlip Pliers

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-23
Module-VDE-Pliers

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

MS-21
Module-QUATROLIT®-Pliers

Details

black, with transparent cover
Width: 31,5 cm, Depth: 14,9 cm
stable ABS plastic

990
Torque Wrench 1/2"

Details

with noticeable and audible "click" mechanism
manually adjustable, double scale unit with Nm and ft.lb.
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
accuracy +-4% of set value
square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

989-...
Metal Saw

Details

for pinned saw blades 150 mm
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000 V
989-E = Spare blade

988-...
VDE Single End Ring Spanner, deep cranked

Details

2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, according to EN 60900/IEC 60900:2004
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

987-...
VDE Single Open-Ended Spanner

Details

jaw set at 15°
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, according to EN 60900/IEC 60900
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

986-...
VDE-Ring Ratchet Spanner

Details

2-colour-multilayer isolation (yellow, red) for easy identification
of insulation damages
smallest possible swivel angle 5 °
tested according to EN/IEC 60900
individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

985
VDE Cable Snip with Dip Insulation

Details

maximum stability under load of the blades by inductive hardening
cutting edge hardness: 65 HRC
for copper and aluminium wire
gunmetal-finish
2-colour-multilayer safety handles isolation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004
ELORA-high grade tool steel C60 / 1.0601

980-165
VDE Wire Stripper with Handle Insulation

Details

self-adjusting blades in respect of diameter to be stripped
for wires from 0,5-5,0 mm
for stripping of single or multi-wire conductors
chrome-plated, polished, with QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

979S-5K
VDE Screwdriver Set

Details

5 pcs.
in an environmentally friendly carton package

977H
VDE Cable Knife

Details

with hook blade, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

977A
VDE Cable Knife

Details

blade with blunt end to protect inner conductors, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

977
VDE Cable Knife

Details

with straight blade, hardened
with blade protector cap and pin hole
blade made of stainless steel, with red, impact resistant insulated handle
VDE insulated up to 1.000V, according to EN 60900/IEC 60900:2004

974-...
Extension Bars 1/2"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

973
VDE-T-Bar 1/2"

Details

with safety screw lock
chrome plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN60900/IEC 60900
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

972
VDE Reversible Ratchet 1/2"

Details

gear-wheel with safety locking mechanism and quick release button
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN60900/IEC 60900
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120-A 12,5, ISO1174, with ball locking device

971-S13
VDE Socket Set 1/2"

Details

13 pcs.
in red plastic box with 2-colour-plastic inlay
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

971-IN...
VDE Screwdriver Sockets 1/2"

Details

only to use with ELORA-No. 972, 973 and 974-125
chrome-plated
female square according to DIN 3120-C 12,5, ISO1174, with ball retaining groove
VDE insulated up to 1.000V, according to EN60900/IEC 60900
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

971-...
VDE Sockets 1/2"

Details

female square according to DIN 3120-C 12,5, ISO1174, with ball retaining groove
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
VDE insulated up to 1.000V, according to EN60900/IEC 60900
tested according to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

970-160
VDE Wire Stripper with Handle Insulation

Details

self-opening by spring
V-shaped jaws for stripping of plastic insulation from single and multi-wire conductors
adjustment of opening position to required diameter by adjustable screw with locknut
for wires from Ø 0,8 - 6,0 mm
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

969-...
Sockets 3/8"

Details

square drive according to DIN 3120-C 10 ISO1174, with ball retaining groove
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA Chrome-Vanadium 31CrV3 / 1.2208

968
T-Handle 3/8"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

967-...
Extension Bars 3/8"

Details

with safety screw lock
chrome-plated
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

966
Reversible Ratchet 3/8"

Details

gear-wheel with safety locking mechanism and quick release button
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
square drive according to DIN 3120-A 10 ISO1174, with ball locking device

961-...
Adjustable Wrench

Details

jaw set at 15°
2-colour-multilayer insulation (yellow, red) for easy identification of insulation damages
chrome plated
handle insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

960-...
VDE Combination Pliers with Handle Insulation

Details

German pattern
strong edition for tough conditions
lay on cutter box for better cutting
maximum stability of the blades under load by inductive hardening
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600 N/mm²)
serrated gripping surface and burner hole
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5746
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

show more show less

959-L...
Hexagon Key

Details

for inside hexagon screws
nickel-plated
ELORA-Chrome-Vanadium steel
DIN ISO 2936
2-color-multilayer insulation (yellow, red) for easy identification of insulation damages
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

956-L...
Hexagon Key with T-Handle

Details

for inside hexagon screws
gunmetal finished
ELORA-Chrome-Vanadium steel
DIN ISO 2936
insulated, tested according to EN/IEC 60900, individually tested with 10.000V and approved for 1.000V

955-...
VDE Heavy Duty Side Cutter with Handle Insulation

Details

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C60 / 1.0601

950-...
VDE Universal Side Cutter with handle insulation

Details

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
chrome-plated, polished, with nonslip QUATROLIT®-2C-handles
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

940-165
VDE Round Nose Plier with Handle Insulation

Details

with short jaws, serrated gripping surface
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

935-90 205
VDE Snipe Nose Plier with Handle Insulation

Details

90° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier similar to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

935-45...
VDE Snipe Nose Pliers with Handle Insulation

Details

45° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

930-...
VDE Snipe Nose Pliers with Handle Insulation

Details

serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

920-165
VDE Flat Nose Plier with Handle Insulation

Details

for holding and bending
short jaws, serrated gripping surface
chrome plated, polished, with nonslip QUATROLIT®-2C-handles
Plier acc. to DIN ISO 5745
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900
ELORA-high grade tool steel C45 / 1.0503

912PZ-...
VDE Screwdriver

Details

for cross slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
ELORA-Chrome-Vanadium 73MoV52 / 1.2381
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
tip according to DIN ISO 8764-1 PZ

910PH-...
VDE Screwdriver

Details

for cross slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
up to ELORA-No. 910PH-0 ELORA-Chrome-Vanadium 73MoV52 / 1.2381, otherwise ELORA-Chrome-Vanadium 59CrV4 / 1.2242
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
tip according to DIN ISO 8764-1 PH

905-...
VDE Screwdriver

Details

for external hexagon screws
gunmetal-finish blade
impact resistant QUATROLIT-2C-handle with pin hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
VDE insulation up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
according to DIN 7445, ISO2725-1

904-S3
VDE Plier Set

Details

3 pcs.
carton box packed
handles VDE insulated up to 1.000V, according to EN 60900/IEC 60900

904-S10
VDE Set

Details

10 pcs.
in red plastic box with 2-colour plastic inlay
VDE insulated up to 1.000V, according to EN 60900/IEC 60900

900IS-...
VDE Screwdriver

Details

for plain slotted screws
blade gunmetal-finish
impact resistant handle with suspension hole
up to ELORA-No. 900IS-100 ELORA-Chrome-Vanadium 73MoV52 / 1.2381 else ELORA-Chrome-Vanadium 59CrV4 / 1.2242
VDE insulated up to 1.000V, according to EN 60900/IEC 60900, fully insulated blade
blade according to DIN ISO 2380-1

892-...
Adjustable Pin Wrench

Details

for nuts with two holes according to DIN 547, spring flange and flange nuts according to DIN 44716
gunmetal finished
high grade tool steel
according to DIN 3116

891-...
Hook Wrench with Pin

Details

for nuts with radial holes according to DIN 1816 and DIN 548
rounded edges for better handling
gunmetal finished
high grade tool steel
according to DIN 1810, Form B

890-VG...
Hinged Hook Wrench with Nose

Details

Short design, fits in every pocket and toolbox
for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
high grade tool steel, hardened
gunmetal finished

890-V...
Adjustable Hook Wrenches with Nose

Details

for grooved nuts to DIN 1804 and bearing nuts to DIN 981
rounded edges for better handling
special steel, hardened
gunmetal finished
high grade tool steel

890-...
Hook Wrench with Nose

Details

for grooved nuts according to DIN 1804, antifriction bearing bolt, according to DIN 981
gunmetal finished
rounded edges for better handling
high grade tool steel
according to DIN 1810, Form A

88-...
Single End Ring Spanner

Details

straight pattern
with suspension eye
sand-blasted
further sizes on request
ELORA-Tempering steel C35 / 1.0501
according to DIN 3111

87M-...
Open End Slogging Spanner, metric

Details

heavy, drop-forged type
sand-blasted
further sizes on request
Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 133

87A-...
Open End Slogging Spanner, inch

Details

heavy, drop-forged type
sand-blasted
further sizes on request
up to 110 mm and all AF-Sizes: Chrome-Vanadium 31 CrV 3 / 1.2208
from 115 mm: ELORA-Tempering steel C35 / 1.0501
according to DIN 133

871TZ-...
Spark Plug Sockets 3/8"

Details

extra deep, with rubber insert
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 10, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

871TMG-...
Spark Plug Socket 3/8"

Details

extra deep, with permanent magnet
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 10, ISO 1174, with ball
retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

86S-13
Ring Slogging Spanner-Set

Details

heavy, drop-forged type
sand-blasted
on yellow metal display board
Size: 895 x 500 mm
further sizes on request
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 7444

86M-...
Ring Slogging Spanner, metric

Details

heavy, drop-forged type
sand-blasted
further sizes on request
from 22 mm until 115 mm: ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
from 120 mm until 165 mm: ELORA-Tempering steel C35 / 1.0501
according to DIN 7444

86A-...
Ring Slogging Spanner, inch

Details

heavy, drop-forged type
sand-blasted
further sizes on request
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 7444

85S.../85L...
Construction Ring Spanner-Sets

Details

heavy, deep cranked pattern
matt chrome plated
on yellow metal display board
Size: 895 x 725 mm
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

85M-...
Construction Ring Spanner, metric

Details

heavy, deep cranked pattern
for use with tommy bar tubes ELORA-No. 855
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

85A-...
Construction Ring Spanner, inch

Details

heavy, deep cranked pattern
for use with tommy bar tubes ELORA-No. 855
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 475

855-...
Tommy Bar Tubes

Details

for use with construction ring spanners ELORA-No. 85
chrome plated
steel tube

771LTZ-...
Spark Plug Socket 1/2"

Details

extra deep, with rubber insert and bore hole Ø 9 mm
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

771LMG-...
Spark Plug Socket 1/2"

Details

extra deep, with permanent magnet
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

770-LTD
Socket for Injection Nozzle

Details

appropriate for injection nozzles on Diesel engine vehicles
size 27 mm, recessed internal contour
hot-forged
chrome-plated
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

770-L21
Radiator Drain Socket

Details

especially appropriate for Caterpillar vehicles
slot width 11 mm
female square drive according to DIN 3120-C 12,5, ISO 1174 with ball retaining groove
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

770-L20-...
Spark Plug Socket 1/2"

Details

extra deep, with rubber insert
chrome-plated, polished
knurled
female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

762TX-...
TORX®-Key with T-Handle

Details

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
TX-6 to TX-45: Chrome-Vanadium 61CrSiV5 / 1.2243
TX-50 and TX-60: Chrome-Vanadium 59CrV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

762TTX-...
TORX®-Key with T-Handle

Details

for inside TORX® safety screws
with hole at drive end
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

762-TX30/300
TORX®-Key with T-Handle, extra long

Details

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

762-TX20/300
TORX®-Key with T-Handle, extra long

Details

for inside TORX® screws
gunmetal finished
black plastic-T-handle with suspension hole
Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

761TTX-...
Screwdriver

Details

for inside TORX® safety screws
with bore hole in tip
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

760TX-30/300
Screwdriver, extra long

Details

for inside TORX® screws
for low placed screw connections e.g. instrument board and car body
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

760TX-...
Screwdriver

Details

for inside TORX® screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

760/761STX-...
Screwdriver Sets

Details

6 pcs.
STX=for inside TORX® screws
STTX=for inside TORX® safety screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

746
Square Awl

Details

chrome plated 4 square blade
nonslip QUATROLIT®-2C-handle
with suspension hole
special steel

745
Round Awl

Details

chrome-plated blade
nonslip QUATROLIT®-2C-handle
with suspension hole
special steel

740-...
Offset Key

Details

for plain slotted screws
matt chrome plated
Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 5200, blade according to DIN ISO 2380

730-...
Offset Key

Details

for cross slotted screws
matt chrome plated, tip gunmetal finished
Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 5208, blade according to DIN ISO 8764-1 PH

70-3
Multi Fitting Key, Electrical

Details

for closings of: pneumatic and hydraulic systems
magnetic valves in automobile- and machinery sector
magnetic valves of oil heating
contactless detection of permanent magnets
contactless voltage field sensor
implemented magnetic field sensor
dimensions: approx.: 158 x 28 mm
female square 5, 6, 7-8 mm
female three-square 9 mm
5 mm square for radiator valves
two-way-key 3-5 mm
magnetic bit adaptor 1/4", supplied with one bit PH 2
screwdriver function with retaining clip
zinc die-casting

show more show less

70-2
Multi Fitting Key, 9 in 1

Details

for all usual technical shut-off systems
1 tool for 9 applications
8 different master cabinet shut-off systems and 5 mm square for radiator valves
flat construction due to space saving swivel mechanism
square locking: 5, 6, 7-8, 9-10 mm
three-edged locking: 7, 8-9, 10-11 mm
two-way-key 3-5 mm and half-moon locking 6 mm
securing chain with snap-hook
Dimensions: 95 x 95 mm
Zinc die-casting

show more show less

70-1
Multi Fitting Key

Details

female square 5, 6, 7-8 mm
female three-square 8-9 mm
Multi Fitting Key: 3-5 mm
5 mm square for radiator valves
body with ¼" bit holder with magnet
dimensions: 97 x 25 mm
zinc die-casting

67E-...
Pipe Wrenches

Details

for highest operational demands
head angled at 45°
drop forged, hardened and tempered
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
roll non-volatile
red laquered, polished jaws
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
according to DIN ISO 5234, Form B

show more show less

676 S5-K / 677 S5-K
Screwdriver Sets

Details

5 pcs.
carton box packed
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

670 S7-K, 673 S7-K
Screwdriver Sets

Details

7 pcs.
carton box packed
matt chrome plated blade with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap

66A-...
Pipe Wrenches

Details

Swedish type
for highest operational demands
head angled at 90°
drop forged, hardened and tempered
teeth additionally inductive hardened
self-locking due to gripping surfaces staggered in reverse order
roll non-volatile
red laquered,polished jaws
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208
according to DIN ISO 5234, Form A

show more show less

658-PZ...
Screwdriver

Details

for cross slotted screws
blade through handle, dull chrome plated with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
similar DIN ISO 8764-2, tip according to DIN ISO 8764-1 PZ

656-PH...
Screwdriver

Details

for cross slotted screws
blade through handle, dull chrome plated with forged hexagon section
through hardened
tip gunmetal finished
wooden handle, clear lacquered with leather cap
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
similar DIN ISO 8764-2, tip according to DIN ISO 8764-1 PH

649-IS...
Electricians Screwdriver

Details

for plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

636-IS...
Screwdriver

Details

for plain slotted screws
blade through handle, dull chrome plated with forged hexagon section
through hardened
blade edge gunmetal finished
wooden handle, clear lacquered with leather cap
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
similar DIN ISO 2380-2, blade edge according to DIN ISO 2380-1

630-...ESD
Electronic Socket Spanner ESD

Details

for outside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶ – 10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

625-KU...ESD
Electronic Ball End Screwdriver ESD

Details

for inside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

625-...ESD
Electronic Screwdriver ESD

Details

for inside hexagon screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

620-TX...ESD
Electronic Screwdriver ESD

Details

for smallest inside TORX®screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

620-TX...
Electronic Screwdriver

Details

for inside TORX®screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

620-TTX...ESD
Electronic Screwdriver ESD

Details

suitable for smallest inside TORX®screws with locking pin, for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

618-S6
Electronic Screwdriver Set

Details

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

617-S6
Electronic Screwdriver Set

Details

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

616-S6
Electronic Screwdriver Set

Details

6 pcs.
in plastic box
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

612-PZ...
Electronic Screwdriver

Details

for cross slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

610-PH...ESD
Electronic Screwdriver ESD

Details

for cross slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

610-PH...
Electronic Screwdriver

Details

for cross slotted screws
dull chrome plated blade with grey tip, 2-C handle with revolving end-cap, non-slip resistant micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 75MoV5 / 1.2381

600-S15
ESD Set

Details

15 pcs.
in black plastic box with 2-colour foam material
TORX®=reg. trade mark of Acument Intellectual Properties, LLC. USA

600-IS...ESD
Electronic Screwdriver ESD

Details

for plain slotted screws
for work with electrostatic endangered components
blade through hardened and chrome-plated, tip gunmetal-finish
ESD precision handle with rotating cap, surface resistance 10⁶–10⁹ Ohm
blade made of high quality ELORA-Chrome-Vanadium-Molybdenum steel
DIN 91953, DIN EN 100-015/1
ESD: DIN IEC 61340-5-1

600-IS...
Electronic Screwdriver

Details

for plain slotted screws
dull chrome plated blade with additionally coated blade tip
2 component grip, revolving end-cap, non-slip micro-surface
blade made of ELORA-Chrome-Vanadium-Molybdenum steel 73MoV5 / 1.2381

590-S
Mini Hook Set

Details

4 pcs.
for removing and inserting of O-rings and sealing gaskets
QUATROLIT®-2C-handles with suspension hole
blade matt chrome-plated
Chrome-Vanadium 58CrV4 / 1.8161

586
Automotive Light Tester

Details

10 mm long probe tip
with protection cap
cable with alligator clamp
for voltage testing from 6-24 V
not for use on vehicles with electrical components
in a plastic bag

583 S7-K...
Screwdriver Sets

Details

7 pcs.
carton box packed
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

583 S6K...
Screwdriver Sets

Details

6 pcs.
carton box packed
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

583 S6K-ST
Screwdriver Set

Details

6 pcs.
carton box packed
forged blade
through hardened
no galvanic surface treatment
nonslip QUATROLIT®-2C-handle
with suspension hole

583 S6K-2
Screwdriver Sets

Details

6 pcs.
carton box packed
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

583 S6-K
Screwdriver Set

Details

6 pcs.
in black plastic packaging with transparent cover
matt chrome plated forged blade
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

583 S5-K-1
Screwdriver Sets

Details

carton box packed
in black plastic packaging with transparent cover
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

583 S5-K
Screwdriver Sets

Details

5 pcs.
in black plastic packaging with transparent cover
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

582 S5-K...
Screwdriver Set

Details

5 pcs.
carton box packed
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

580-45
Spark Plug Tester

Details

for function testing of spark plugs with one electrode
plastic handle with metal clip
blade made of Chrome-Vanadium 31CrV3 / 1.2208

579 S5-K, 581 S5-K
Screwdriver Sets

Details

5 pcs.
carton box packed
matt chrome plated hexagon blade with forged hexagon section
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole

577-...
Screwdriver Blades Variant

Details

for inside hexagon screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
according to DIN ISO 2936

575-...
Screwdriver with Ball End

Details

for inside hexagon screws
matt chrome plated blade
through hardened
tip gunmetal finished
maximum swivel angle 20°
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2936

show more show less

573TX-...
Screwdriver with Ball End

Details

for inside TORX® screws
matt chrome plated blade
through hardened
tip gunmetal finished
maximum swivel angle 20°
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made of ELORA-Chrom-Vanadium 61CrSiV5 / 1.2243
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

569-PZ...
Screwdriver

Details

for cross slotted screws
matt chrome plated forged blade with forged hexagon section
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PZ

show more show less

566-...
VDE Voltage Tester

Details

for 100-250V AC
contact sensor for activating test function
with plastic clip and pin hole
zincked blade
according to DIN VDE 0680 Teil 6 1977-02

563
Voltage Tester

Details

for 120-230V AC
contact sensor in brass head for activating test function
transparent plastic handle with lens and brass head
nickel-plated blade and plastic sheathed

561
Voltage Tester

Details

for 120-230V AC
contact sensor in plastic head for activating test function
transparent plastic handle with lens and red plastic head
nickel-plated blade and plastic sheathed

559/1-PH...
Screwdriver

Details

for cross slotted screws
matt chrome plated hexagon blade with forged hexagon section
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Special steel 73MoV5 / 1.2381
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

559-PH...
Screwdriver

Details

for cross slotted screws
matt chrome plated forged blade with forged hexagon section
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

555-PH...
Screwdriver, short version

Details

for cross slotted screws
matt chrome plated blade
through hardened
tip gunmetal finished
plastic handle
with suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

554-PZ...
Screwdriver, short version

Details

for cross slotted screws
matt chrome plated blade
through hardened
tip gunmetal finished
plastic handle
with suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PZ

show more show less

552-PZ...
Screwdriver Blades Variant

Details

for plain and cross slotted screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
blade edge according to DIN ISO 2380-1
tip according to DIN ISO 8764-1 PZ

551-PH...
Screwdriver Blades Variant

Details

for plain and cross slotted screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
blade edge according to DIN ISO 2380-1
tip according to DIN ISO 8764-1 PH

549-PZ...
Screwdriver

Details

for cross slotted screws
matt chrome plated blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
PZ0 = blade made of ELORA-Special steel 73MoV52 / 1.2381
PZ1-3 = blade made of ELORA-Chrome-Vanadium 61CrSiV5 / 1.2243
PZ4 = blade made of ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, Spitze nach DIN ISO 8764-1 PZ

show more show less

547-ST PH...
Screwdriver, stainless

Details

for cross slotted screws
forged blade
through hardened
no galvanic surface treatment
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Stainless Steel X46Cr13 / 1.4034
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

547-PH...
Screwdriver

Details

for cross slotted screws
matt chrome plated forged blade
through hardened
tip gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
PH0 = blade made of ELORA-Special steel 73MoV52 / 1.2381
PH1-4 = blade made of ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 8764, tip according to DIN ISO 8764-1 PH

show more show less

545-ST IS...
Screwdriver, stainless

Details

for plain slotted screws
forged blade
through hardened
no galvanic surface treatment
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Stainless Steel X46Cr13 / 1.4034
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

545-IS...
Screwdriver

Details

for plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

543-IS...
Screwdriver, short version

Details

for plain slotted screws
matt chrome plated blade
through hardened
blade edge gunmetal finished
plastic handle
with suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2A, blade edge according to DIN ISO 2380-1

show more show less

539/1-IS...
Screwdriver

Details

for plain slotted screws
matt chrome plated hexagon blade with forged hexagon section
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Special steel 73MoV5 / 1.2381
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

539-IS
Screwdriver

Details

for plain slotted screws
matt chrome plated forged blade with forged hexagon section
through hardened
blade edge gunmetal finished
nonslip QUATROLIT®-2C-handle
with suspension hole
blade made from ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN ISO 2380-2, blade tip according to DIN ISO 2380-1

show more show less

5370-ST
Electronic SMD Reverse Action Tweezers

Details

for handling of SMD´s on PCB´s, SOT packages and monolithic chips
anti-glare satin finish, smooth gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-Stainless steel

5350-STE
Electronic Tweezer ESD

Details

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, flat, extremely long, fine tips, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5350-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, smooth gripping surfaces, flat, extreme fine, long tips
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

535-IS 4
Screwdriver Blade Variant

Details

for plain slotted screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
blade edge according to DIN ISO 2380-1

5340-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
satin antiglare black finish, smooth gripping surfaces, surface resistance 10⁶ - 10⁹ Ohm, antimagnetic, acid-proof, stainless
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5340-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5330-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
satin antiglare black finish, smooth gripping surfaces, surface resistance 10⁶ - 10⁹ Ohm, antimagnetic, acid-proof, stainless
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5330-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5320-ST
Universal Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5310-ST
Universal Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5300-ST
Electronic Gripping Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5280-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5270-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

527-TX...
Screwdriver Blades Variant

Details

for inside TORX®screws
suitable for ELORA-No. 520
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

527 S4
Screwdriver Set Variant

Details

4 pcs.
for inside TORX®screws
in black plastic wallet
hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
with suspension hole
hexagon blade matt chrome-plated
through hardened
ELORA-special steel 73MoV5 / 1.2381
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

5260-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5250
Electronic Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, rectangular, smooth gripping and grab surfaces, 2 mm width
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

524-...
Chain Grip Plier

Details

for clamping of any shaped profile, especially appropriate in narrow and difficult to reach areas like oil filters, exhaust pipes, etc.
ELORA-No. 524E is an extension as well as spare chain at the same time
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

5220-ST, 5290-ST
Electronic Gripping Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

5210-STE
Positioning Tweezers ESD

Details

for all fine gripping and assembly work
anti-glare black finish, inside vertical concave, until Ø 2mm, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5210-ST
Electronic Positioning Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, inside vertical concave, until Ø 2mm, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5200-ST
Electronic IC-Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, with IC-tip
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-Stainless steel

520
Screwdriver Handle Variant

Details

hexagon bolster for 10 mm spanner drive and 6 mm hexagon chuck
nonslip QUATROLIT®-2C-handle
chuck and bolster made from special tool steel WX 69

5190-STE
Positioning Tweezer ESD,oblique, half round

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare black finish, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5190-ST
Positioning Tweezers, half round

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5170-STE, 5180-STE
Positioning Tweezers ESD, oval

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare black finish, grooved gripping surfaces, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5170-ST, 5180-ST
Positioning Tweezers, oval

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5160-STE, 5240-STE
Electronic Tweezers ESD

Details

for all fine gripping and assembly work
anti-glare black finish, smooth gripping and grab surfaces, extremely fine, straight tips, surface resistance 10⁶-10⁹ Ohm
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel
ESD: DIN IEC 61340-5-1

5160-ST, 5240-ST
Electronic Positioning Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, extremely fine, straight tips, grooved gripping and grab surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5140-ST, 5150-ST, 5360-ST
Universal Tweezers

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surface, serrated reaching surface
serrated grab surfaces, stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5130-ST
Electronic Positioning Tweezers

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5120-ST
Electronic Positioning Tweezers

Details

for all fine gripping and assembly work
for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, tips angled 90°, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

512-180
Sheet Metal Grip Plier

Details

for clamping, bending and folding of thin and soft metal sheet
80 mm width, parallel joint jaws
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
drop-forged basis jaws
tin jaws made of C 1045, hardened

5110-ST
Electronic Positioning Tweezers

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

511-280
Pipe Welders Grip Plier

Details

for centered clamping of two close-fitting pipes
for welding, drilling, soldering etc.
the large opening allows a good overview
during welding
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

510TG-280
Welder

Details

for clamping of profiles and straps, especially appropriate to connect two working pieces of the same thickness
the large opening allows a good overview during welding
quick release lever with return spring
drop-forged, nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
annealed cast iron

510-280
Welder

Details

for clamping of profiles and straps, especially appropriate to connect two working pieces of the same thickness
the large opening allows a good overview during welding
quick release lever with return spring
drop-forged, nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

509-500
C-Clamp Grip Plier

Details

for clamping of profile material with high racks and for work on bulky work pieces, especially appropirate for metal construction and car body work
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

508-...
Long Nose or Crow Nose Pliers

Details

to clamp or remove round, profile and flat material in narrow and deep sections for e.g. motors, control cabinets etc.
long, slim jaws with burner hole
quick release lever with return spring
drop-forged, nickel-plated
jaws made of C1045

507A-...
Aluminium C-Clamp Grip Pliers

Details

for clamping of profile material with high racks and for work on bulky work pieces
the light alloy avoids the adhering of welding beads
approx. 40% weight reduction for better handling in continuous operation
quick release lever with return spring
nickel-plated
jaws made of heavy-duty light metal alloy

507-280/280S
C-Clamp Grip Pliers

Details

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

507-165/165S
C-Clamp Grip Pliers

Details

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of C1045

507-...
C-Clamp Grip Pliers

Details

to use instead of screw clamps
movable steel jaws in the S version
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
extension made of ST37-2

505-...
Parallel Grip Pliers

Details

for exceedingly high work pieces
even for smaller round pieces
clamp function
parallel clamping surface with prism recess
equal parallelism over the complete clamping range
long slide (100-200 mm)
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

504-S8
Mechanic Set

Details

8 pcs.
assortment in convenient plastic case

502-...
Ideal Grip Pliers

Details

for round, profile and flat material
combined jaw shape
with adjustment screw and release lever
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

501
Parallel-Grip Plier

Details

for round and flat material
plier mouth with swivelling jaws
with adjustment screw
quick release lever with return spring
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

500P-...
Prism Grip Pliers

Details

for round and flat material
3-point support for any material profile
with adjustment screw
quick release lever with return spring
forged, hardened and tempered prism jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

500G-250
Grip Plier, straight jaws

Details

for flat material
with adjustment screw
quick release lever with return spring
forged, hardened and tempered straight jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

500-...
Grip Pliers with wire cutter, curved jaws

Details

for round and flat material
with adjustment screw
quick release lever with return spring
forged, hardened and tempered half-round jaws
nickel-plated
jaws made of ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

499-...
Concreters

Details

Mechanic's wipper for heaviest action
inductive hardened cutting blade, cutting edge hardness 61-63HRC
gunmetal-finish, ground head
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 9242 Form A

498-7
Wire Snip

Details

for wires up to 10 mm Ø
self-opening, one hand locking function
with red, impact resistant plastic handles
stainless steel

497R-300
Pelican Tin Snip

Details

for long straight continuous cuts
blades additionally inductive hardened and ground, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

495-BI...
Combination Pliers, German pattern

Details

strong edition for tough conditions
lay on cutter box for better cutting
maximum stability under load by inductive hardening of the blades
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

494S-0,5 BI
Wire Stripper

Details

self-adjusting blades in respect of diameter to be stripped
for stripping of single or multi-wire conductors
for wires from Ø 0,5 to 5,0 mm
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503

494 BI
Wire Stripper with restricted opening

Details

self opening by spring
V-shaped jaws for stripping of plastic insulation from single and multi-wire conductors
adjustment of opening position to required diameter by adjustable screw with locknut
for wires from Ø 0,8 to 6,0 mm
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503

492-BI...
Side Cutter

Details

oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

490-BI...
Heavy Duty Side Cutter

Details

high cutting performance with minimal effort
maximum stability under load by additional inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

show more show less

489-3
Seaming Plier, 90° bent

Details

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

489-2
Seaming Plier, 45° bent

Details

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

489-1
Seaming Plier, straight

Details

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

488-...
Punch Tin Snips

Details

for short, straight and figure cuts, big radius
blades additionally inductive hardened and ground, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
made of high grade tool steel, forged

485-BI
Heavy Duty End Cutter

Details

maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
similar DIN ISO 5748

484L / 484R
Ideal Lever Tin Snips

Details

for short, straight and figure cuts, big radius
with leverage
self-opening due to mounted leaf spring, with lock
burr-free cut
adjustable, bolted joint
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground, 60-62 HRC
with plastic handles and trap protection
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1,2 mm with a tensile strength of 600 N/mm²
high grade tool steel, forged

show more show less

483L / 483R
Shape Cutting Lever Tin Snips

Details

for short, straight and figure cuts, small radius
with leverage
self-opening due to mounted leaf spring with lock
burr-free cut
adjustable, bolted joints
blades with micro denticulation to maximize the safety factor against sliding
blades additionally inductive hardened and ground, 60-62 HRC
with plastic handles and trap protection
for metal sheet thickness of max. 1,8 mm with a tensile strength of 400 N/mm² or 1,2 mm with a tensile strength of 600 N/mm²
high grade tool steel, forged

show more show less

480-340
Brake Spring Plier

Details

for removing and replacing of brake shoe return springs in drum brakes
with a moveable claw, especially suitable for glued brake linings
nickel-plated, with black coated handles
Chrome-Vanadium 59CrV4 / 1.2242

480-...
Brake Spring Pliers

Details

for removing and replacing of brake shoe return springs in drum brakes
especially suitable for riveted brake linings
nickel-plated
Chrome-Vanadium 59CrV4 / 1.2242

4770
Electronic Wire Stripping Plier ESD

Details

for wire stripping of PVC, Teflon etc., for work with electrostatic endangered components
brass adjustment screw inside jaws, inlaid joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
ELORA-high grade tool steel C45 / 1.0503
ESD: DIN IEC 61340-5-1

477-BI-...
Round Nose Pliers

Details

with long jaws, serrated gripping surface
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

4760
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹
cutting edge hardness 61-63 HRC
ELORA -high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

476-BI...
Flat Nose Pliers

Details

for holding and bending
short jaws, serrated gripping surface
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

4740
Electronic Flat Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
straight, long jaws, flat tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

474-A11-41
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted double leaf spring
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

474-A1-4
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted double leaf spring
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

4730
Elektronik Seitenschneider ESD

Details

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

473-J 11-41
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

473-J 1-4
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
chrome plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

4720
Electronic Round Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
short jaws, round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

4710-...
Electronic Flat Nose Pliers ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
straight, short jaws, flat tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH= smooth gripping surface, without cut
MH= serrated gripping surface, with cut
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

471-90 BI...
Snipe Nose Pliers with side cutter, bent

Details

90° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
similar DIN ISO 5745

471-45 BI...
Snipe Nose Pliers with side cutter, bent

Details

45° bent, serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

4700
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
very fine, slim, long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

470-BI...
Snipe Nose Pliers with side cutter, straight pattern

Details

serrated gripping surface, burner hole and side cutter
maximum stability under load of the blades by inductive hardening
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

4690
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, straight long jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

469
Circlip Plier for external retaining rings

Details

for external retaining rings without holes
straight jaws, self-opening due to mounted double leaf spring
chrome-plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

4680
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

468-BI
Wire Stripper/Cutter

Details

side cutter with dual function (cutting and stripping of insulation)
stripping holes for single and multi-wire conductors with 1,5 mm² and 2,5 mm² diameter
oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
similar DIN ISO 5749

show more show less

4670
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, short jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

466A-...
Cable End Sleeve Pliers

Details

for pressing of end-sleeves according to DIN 46228 part 1 and 4
with side cutter and wire stripping mechanism for soft wire
red handles, PVC dip insulated
ELORA-high grade steel C45 / 1.0503

4660-...
Electronic Snipe Nose Pliers ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
short, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH = smooth gripping surface
MH = serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

465-...
Spark Plug Pliers

Details

for difficult to access spark plug sockets
jaw length 50mm
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

4640
Electronic Tungsten Carbide Oblique Cutter ESD

Details

for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

464-...
Spark Plug Plier

Details

hooked jaws
for difficult to pull down spark plug sockets
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

4630
Electronic Tungsten Carbide Side Cutter ESD

Details

for cutting very hard wires which are difficult to access, for all work with electrostatic endangered components
pointed, narrow head with groove and fine bevel, small version, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

463
Glow Plug Plier

Details

straight edition
for plugging on and pulling down of deep-seated glow plugs
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

4620
Electronic Tungsten Carbide Side Cutter ESD

Details

for cutting very hard materials with coincident maximum stability under load, for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load due to carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

461
Revolving Punch Plier

Details

for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

460
Revolving Punch Plier with leverage

Details

70% power saving by leverage
for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
bright nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

4590
Electronic Oblique Cutter ESD

Details

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
wide head, long cutting edges, with fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4580-...
Electronic Oblique Cutter ESD

Details

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

458
Revolving Punch and Eyelet Plier

Details

for pre-punching and pressing of eyelets 458S-4,5, 458S-5,0, 458S-5,5
bright nickel plated, with black ergonomically formed plastic handles
high-strength special tool steel

4570
Electronic Oblique Tip Cutter ESD

Details

for virtually flush cutting of thin, soft wires in places difficult to access, for work with electrostatic endangered components
extra narrow head, fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-Chrome-Vanadium 80CrV2 / 1.2235
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4560
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4550-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4540
Electronic Side Cutter with Wire Trapping Spring ESD

Details

with trapping wire to cut off wire, for all work with electrostatic endangered components
oval head with wire trapping spring, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4530-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
oval head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4520-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finished, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4510
Electronic Side Cutter ESD

Details

for cutting in places difficult to access, for work with endangered electronic components
pointed, narrow head, small version with fine bevel, maximum stability under load of the cutting edges by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1