Made in Germany

374-2
Flat Nose Plier, angled pattern

Details

extra-long for difficult to access areas
grooved gripping surfaces
ground, with dip insulated, black handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

5320-ST
Universal Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces, serrated reaching surface
stainless, antimagnetic, acid-proof
Special-Chrome-Nickel-steel

138-A
Siphon or Connector Plier

Details

loosening and tightening of pipe connections with round union nuts from Ø 25 mm
loosening and tightening of ring lock connectors (like Canon connectors)
drop forged, with slip on joint, 4 adjusting positions
jaw width 10 mm
with bolted plastic jaws
chrome-plated, PVC-dip insulated handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

1080, 1081, 1082
Universal Cable Knife

Details

1080-1081: for wire of 4-28 mm Ø
1082: for wire of 8-28 mm Ø
for precise, quick and safe stripping of all kind of round wires, round and length cut in one operation
blade with transparent plastic safety cover
hardened special purpose steel blade, black plastic handle

1083
Round Wire Stripper

Details

for round wire of 8-13 mm Ø (e.g. NYM 3 x 1,5 mm² up to 5x2,5 mm²)
for flush cutting-off even in difficult to access areas like for example distribution boxes
automatic adjustment of the cutting depth
hardened special purpose steel blades, black plastic handle

1094
Automatic Wire Stripper

Details

for wire diameter 0,2-6,0 mm²
automatic adjustment to wire diameter
with length stop for stripping length from 5-12 mm
integrated side cutter for wire up to Ø 2,0 mm
blades made of hardened special steel
black plastic handles

1095
Wire Stripper

Details

for wire cross section 0,5-6,0 mm²
for automatic stripping of inner conductors
with scale for stripping length from 5-12 mm
integrated side cutter
blades made of hardened special steel
black plastic handles

1100-L
Tool Cabinet, large Model

Details

2 doors, with 2 drawers
lockable with cylinder lock
powder coated, ELORA-yellow (RAL 1006), doors black (RAL 9005)
stable steel sheet version

1212
Mechanics Foam Mat

Details

high comfort due to high foam quality
carrying and hanging handle
washable
oil and water-resistant
made of XPE foam material, black and yellow
dimensions: 210 x 450 x 30 mm

1220-L7
Roller Tool Cabinet Super Caddy, 7 drawers

Details

with 7 drawers
solid metal sheet pattern, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 7 storage compartments for small parts and rim on all sides
200 kg shelf load capacity due to strengthened top cover
solid handlebar, mounting possible on both sides
sides and back panel with Euro-Perforation 10 x 38 mm (hole square 10 x 10 mm, hole centre-hole centre 38 x38 mm) for mounting accessory hooks, rays, waste basket, can holder, paper roll holder, cable drum
central locking system with cylinder lock and 2 keys
loading capacity of each drawer 40 kg
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
can be individually divided with separators or equipped with ELORA-OMS modules
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
dividers for drawers separately available
delivery without tools and accessories
suitable assortments: WS and OMS
other drawer types and special colours on request

show more show less

1225-L7
Roller Tool Cabinet ToolJet

Details

7 drawers
solid metal sheet pattern with solid sub construction, ELORA-yellow (RAL 1006)
corrosion- and scratch-resistant powder-coating
shelf space on the top made of ABS plastic with 7 storage compartments for small partsand rim on all sides
200 kg shelf load capacity due to strengthened top cover
solid ergonomic steel reinforced handlebar,mounting possible on both sides
sides and recessed back panel with Euro-Perforation 10 x 38 mm (hole square 10 x 10 mm, hole centre-hole centre 38 x38 mm) for mounting accessory hooks, trays, waste basket, can holder, paper roll holder, able drum
central locking system with cylinder lock and individual drawer lock system (if one drawer is open it is not possible to open another one)
loading capacity of each drawer 40 kg
each drawer has a safety locking system and is 100% extractable
drawer with ball bearing guide rails
drawer internal measurements W 573 x D 410 mm
drawers ELORA-black powder-coated (RAL 9005)
can be individually divided with separators or equipped with ELORA-OMS modules
total loading capacity 450 kg
broad gauge running gear with 4 Ø 125 mm full rubber, smooth running castors, 2 swivel castors with double break function (tangential and axial)
delivery without tools and accessories
suitable assortments: WS and OMS
dividers for drawers separately available
other drawer types and special colours on request

show more show less

1227-L
Workshop cabinet

Details

completely welded steel sheet construction
2 doors, with 4 height-adjustable shelves
load capacity 50 kg per shelve
doors strengthened and 3-point safety lock
rotary handle with cylinder lock
powder coated, ELORA-yellow (RAL 1006) doors black (RAL 9005)

1300...
Tool Kit

Details

16 pcs.
in strong black storage wallet

130BI-240
Waterpump Plier

Details

lay-on slip joint and teeth cut-out
tooth inductive hardened, trap protection
chrome plated, polished, dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN ISO 8976, Form A

133-250
Quick Gripping Waterpump Plier

Details

quick adjustment by press a button
box joint
absolute safe, no displacement during work
self-locking due to gripping surfaces staggered in reverse order
Teeth inductive hardened, trap protection
chrome-plated, polished jaw
ELORA Chrome-Vanadium 31 CrV3 /1.2208
acc. to DIN ISO 8976 Form B

show more show less

137
Plumbing Wrench

Details

for chrome and nickel plated bathroom fittings
with lever clamp
with exchangeable plastic jaws, 8mm wide
gunmetal-finished
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

138
Siphon or Connector Plier

Details

loosening and tightening of pipe connections with round union nuts from Ø 25 mm
loosening and tightening of ring lock connectors (like Canon connectors)
drop forged, with slip on joint, 4 adjusting positions
serrated jaws, jaw width 10 mm
chrome-plated, PVC-dip insulated handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

139
Spud Wrench

Details

for the assembly of valve nipples in heating units for 3/8", 1/2", 3/4", 1" and 4 intermediate steps
with 1/2" square drive, chrome plated
high grade tool steel

1450-3
Spinner Handle 1/4"

Details

nonslip QUATROLIT®-2C-handle
with suspension hole
matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
male square according to DIN 3120-A 6,3, ISO 1174, with ball locking device
according to DIN 3122, ISO 3315

1483-...
Shape Cutting Tin Snips

Details

for short, straight and figure cuts, small radius
blades additionally inductive hardened and ground, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

1484-...
Ideal Tin Snips

Details

for continuous cuts and figure cuts
blades additionally inductive hardened and sharpened, 56-59 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
for metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

155-...
Hexagon Key with T-Handle

Details

for inside hexagon screws
blades nickel plated
with black T-Handle and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
DIN ISO 2936

158R-...
Hexagon Key Sets

Details

for inside hexagon screws
sorted on metal ring
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159-...
Hexagon Keys, metric

Details

for inside hexagon screws
0,7 up to 1,3 gunmetal finished, all other sizes nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159A-...
Hexagon Keys, inch

Details

for inside hexagon screws
nickel plated
ELORA-Chrome-Vanadium 59 CrMoV4 / 1.2242
DIN ISO 2936

159KU-...
Ball End Hexagon Key, extra long, metric

Details

for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159KUA-...
Ball End Hexagon Key, extra long, inch

Details

for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159L-...
Hexagon Keys, extra long, metric

Details

for inside hexagon screws
extra long
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159LA-...
Hexagon Keys, extra long, inch

Details

for inside hexagon screws
extra long
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-...A
Hexagon Key Sets, inch

Details

for inside hexagon screws
in black plastic wallet
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-...L
Hexagon Key Sets, extra long, metric

Details

for inside hexagon screws
in plastic holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-...M
Hexagon Key Sets, metric

Details

for inside hexagon screws
in black plastic wallet
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-8P
Hexagon Key Set

Details

for inside hexagon screws
in plastic storage box
nickel plated
ELORA-Chrome-Vanadium 59 CrMoV 4 / 1.2242
DIN ISO 2936

159S-KK...
Hexagon Key Sets

Details

for inside hexagon screws
plastic holder with elevating mechanism
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159S-KUB
Ball End Hexagon Key Set, extra long

Details

in foldable plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

159SK-...
Hexagon Key Sets

Details

for inside hexagon screws
metal holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159SK-9M, 159SK-10M
Hexagon Key Sets

Details

for inside hexagon screws
in plastic holder
nickel plated
ELORA-Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

159SKU
Ball End Hexagon Key Set, extra long

Details

in 2C-plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

159SKU E
Ball End Hexagon Key Set, extra long

Details

in plastic holder
for inside hexagon screws
for use in awkward areas
swivel angel up to 30°
ball profile on the long side
nickel plated
Chrome-Vanadium 59CrMoV4 / 1.2242
DIN ISO 2936

show more show less

159SW
Hexagon Key Set

Details

for inside hexagon screws
in workshop stand
blades nickel plated
2C T-Handle with lateral drive and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

159W-...
Hexagon Key with T-Handle

Details

for inside hexagon screws
blades nickel plated
2C T-handle with lateral drive and suspension hole
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
DIN ISO 2936

159Z-...
Hexagon Key with pin

Details

for inside hexagon screws with bore hole
nickel plated
Chrome-Vanadium 59CrV4 / 1.2242

160S-KXZN
Offset Key Set

Details

for inside multi-point B &S and XZN screws
metal holder with elevating mechanism
nickel plated
Chrome-Vanadium 59CrV4 / 1.2242

162-SWTX
TORX®-Key Set with T-Handle

Details

Workshop display
for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
2C T-handle with lateral drive and suspension hole
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162LTX...
TORX®-Key, long

Details

for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162S-KKTTX
TORX®-Key Set

Details

plastic holder with elevating mechanism
for inside TORX® safety screws
with hole at drive end
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162S-KTTX
TORX®-Key Set

Details

metal holder, nickel plated
for inside TORX® safety screws
with hole at drive end
gunmetal finished
Chrome-Vanadium 59 CrMoV 4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162S-KTX
TORX®-Key Set

Details

metal holder, nickel plated
for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162S-TXKU
TORX®-Ball End Key Set

Details

in plastic holder
for inside TORX® screws
for use in awkward areas
swivel angel up to 25°
ball profile on the long side
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

show more show less

162SLTX
TORX®-Key Set, long

Details

in plastic holder
for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162TX-...
TORX®-Key, short

Details

for inside TORX® screws
gunmetal finished
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

162WTX-...
TORX®-Key with T-Handle

Details

for inside TORX® screws
blade matt chrome plated, tip gunmetal finished
2C T-handle with lateral drive and suspension hole
Chrome-Vanadium 59CrMoV4 / 1.2242
TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

163
Tyre Lever

Details

especially suitable for tubeless tyres
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

164
Pry Bar

Details

especially appropriate for difficult to reach areas
forged pattern
throughout hardened and tempered to 42-46 HRC
chrome-plated
ELORA-Chrome Vanadium 31CrV3 / 1.2208

1640
Adjustable File Holder

Details

for file blades ELORA-No. 1641 (delivery without file blade)
adjustable pattern with clamping screw
Aluminium

1640H
File Holder for Car Body Files

Details

for file blades ELORA-No. 1641 (delivery without file blade)
wood

1641-...
Carbody File Blades

Details

for file holder ELORA-No. 1640 and 1640H

1644-10
Seaming or Bending Plier

Details

for seaming of metal sheets
forged, black coated
red dip insulated handles
high grade tool steel

166
Mounting Bar

Details

for dismantling parts lying on top of each other, for centration of drill bores
chrome plated 4 square shaft
ELORA-Chrome-Vanadium 31CrV / 1.2208

1660-...
Soft Faced Hammer

Details

face holder made of cast zinc
exchangeable faces made of impact resistant Cellulose-Acetate
ash handle
DIN 53505, 65 Shore D

1660E-...
Spare Plastic Faces for soft faced hammer

Details

for ELORA-No. 1660-...
made of impact resistant Cellulose-Acetate

1660KL-...
Wedges for Soft Faced Hammer

Details

for ELORA-No. 1660-...

1660ST-...
Handles for Soft Faced Hammer

Details

for ELORA-No. 1660-... and 1661-...
ash wood

1661-...
Plastic Hammer

Details

face holder made of cast zinc
exchangeable faces made of impact resistant Desmopan
ash handle
DIN 53505, 55 Shore D

1661E-...
Spare Plastic Faces

Details

for ELORA-No. 1661-...
wear- and break-resistant material Desmopan

167
Tyre Pressure Gauge

Details

with cranked measuring intake for VG8 screw thread
with push-button for resetting the indicator and rotatable for zero regulation
measuring scale 0-10 bar, resp. 0-140 PSI
pressure indication in BAR and PSI
accuracy ± 1% of the value

167-1
Valve Rotator

Details

for screwing on and off the valve inserts as well as for pushing the valve pin in tyre valves
plastic grip

1675/2-...
Nail Lifter, hexagonal

Details

heavy duty pattern
hardened and tempered
high grade tool steel C45 / 1.0503

1676/1-...
Wrecking Bars

Details

with straight edge and point
working end hardened
high grade tool steel C45 / 1.0503

1676/2-...
Wrecking Bars

Details

with angled edge and straight point
working end hardened
high grade tool steel C45 / 1.0503

1676/3-...
Wrecking Bars

Details

with point and claw
working end hardened
high grade tool steel C45 / 1.0503

1676/4-...
Wrecking Bars

Details

heavy duty pattern
with ball head and edge
working end hardened
high grade tool steel C45 / 1.0503

1676/6-...
Wrecking Bars

Details

heavy duty pattern
with curved edge and straight point
working end hardened
high grade tool steel C45 / 1.0503

1678
Carpenter

Details

drop forged hammer head
black, nonslip plastic handle
head coated and mechanically fixed
steel tube handle
head made from high grade tool steel C45 / 1.0503

168-...
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated, gunmetal-finish
high grade tool steel

1680-330
Claw Hammer

Details

drop forged hammer head
black, nonslip plastic handle
coated head, face and claw polished
steel tube handle
head made of high grade tool steel C45 / 1.0503

169-...
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated, gunmetal-finish
high grade tool steel

1690-...
Dead-Blow Nylon Soft Faced Hammer

Details

specially appropriated for targeted strikes (automobile industries, moulds and tool making)
for non-rebounding strikes without loosing power of impact and material gently work
strong steel center section with holding pins for the spare nylon faces
mass of steel shot in the hammer head exactly fine-tuned (mass inertia principle)
nylon striking faces, exchangeable
hickory handle
DIN 53505, 73 Shore D

1690E-...
Spare Nylon Faces

Details

for ELORA-No. 1690-...
wear- and break-resistant material Nylon

170-...
Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and wheel bolts of trucks
forged pattern
additional 13/16 AF female square drive within the size of 32 mm, for operating of wheel bolts with male square drive
to operate with tommy bar ELORA-No. 171
nickel-plated
special tool steel

171-...
Tommy Bars for Wheel Nut Wrench

Details

to operate the wheel nut wrench ELORA-No. 170
nickel-plated
Chrome-Vanadium 31CrV3 / 1.2208

172-...
Puller

Details

2 legs, heavy-duty pattern, silver-coloured, puller legs to be used on both sides: one side with wide, the other side with narrow hooks
zinc-plated, spindles gunmetal-finish
high grade tool steel

173-...
Standard Puller

Details

heavy forged pattern
2 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

173K-...
Standard Puller

Details

heavy-duty, forged pattern
2 arms, with very narrow forged pulling hooks
especially suitable for difficult to reach areas
zinc-plated, spindle and pulling hook end gunmetal-finish
high grade tool steel

173S
Puller Set

Details

2 arms with 3 pairs of hooks in different lengths
especially suitable for difficult to reach areas
zinc-plated, spindle and pulling hook end gunmetal-finish
high grade tool steel

174-50
Battery Terminal Puller

Details

for pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
10 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

174-80/2
Battery Terminal Puller

Details

for pulling off battery terminals, ball bearings, gear-wheels, etc.
2 arms
12 mm wrench size
zinc-plated, spindle gunmetal-finish
high grade tool steel

174-80/3
Battery Terminal Puller

Details

for pulling off battery terminals, ball bearings, gear-wheels, etc.
3 arms
12 mm wrench size 12 mm
zinc-plated, spindle gunmetal-finish
high grade tool steel

175-...
Hub Puller

Details

for vehicle hubs with a bolt circle diameter up to 225 mm
pulling legs movable and replaceable
nickel-plated, spindle gunmetal-finish
Chrome-Vanadium 31CrV3 / 1.2208

176-...
Puller

Details

for pulling off ball bearings, gear-wheels, discs, etc.
heavy-duty, forged pattern
2 arms
zinc-plated, spindle gunmetal-finish
high grade tool steel

177-...
Puller

Details

for pulling off ball bearings, gear-wheels, v-belt pulley etc.
heavy-duty, forged pattern
3 arms
zinc-plated, spindle gunmetal-finish
high grade tool steel

178-...
Stud Extractor

Details

for left and right hand thread
zinc-plated, spindle gunmetal-finish with 19 mm hexagonal drive
high grade tool steel C45 / 1.0503

1811-L
Wheel Work Bench

Details

scratch resistant, powder coated, ELORA-yellow (RAL 1006), door/drawers black (RAL 9006)
laminated beech wood (Multiplex) work bench board
drawers with ball-bearing guide rails, full telescopic drawer slide
6 drawers with roller bearing, internal dimensions of drawers: width 573 x Depth 410
individual separation using length- and cross dividers, resp. using ELORA OMS-modules
central locking with mutual drawer locking
40kg load capacity per drawer
separate door locking, with one shelve
stable handle
2 fixed and 2 braked swivel castors
total load capacity 450kg
suitable assortments: all OMS-Modules

show more show less

185-...
Wheel Nut Wrench

Details

bent pattern with hub cap puller
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

186
Tyre Lever

Details

especially suitable for truck tyres
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

187-160
Strap Wrench

Details

for removing oil filters and clamping of round shaped parts
max. parts diameter 160 mm
non-slip fibre ribbon, width 22 mm
plastic coated grip
high grade tool steel

187-180
Strap Wrench

Details

for removing oil filters and clamping of round shaped parts
especially appropriate for trucks, construction and agriculture machinery
max. parts diameter 180 mm
non-slip fibre ribbon, width 50 mm
with 1/2" female square drive
high grade tool steel

187-280
Strap Wrench

Details

for removing oil filters and clamping of round shaped parts
especially appropriate for trucks, construction and agriculture machinery
max. parts diameter 280 mm
non-slip fibre ribbon, width 25 mm
drop forged pattern
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

190-...
Filter Wrench

Details

for all common oil-, fuel filter and round couplings
with adjustable steel band
plastic coated grip
nickel-plated

195CV-...
Four Way Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and wheel bolts of trucks and tractors
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

195CV-17, 195CV-5/8
Four Way Wheel Nut Wrench

Details

for cars, light trucks and agricultural machinery
heavy-duty pattern
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

196-...
Four Way Wheel Nut Wrench

Details

for loosening and tightening of wheel nuts and bolts of trucks, tractors and construction machinery
heavy-duty pattern due to forged centrepiece
dimensions: 750 x 750 mm
additional 13 / 16” female square within the size 32 mm for operating of wheel nuts with male square
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208
pattern according to DIN 3119, ISO 6788

OMS-9L
Empty Module

Details

empty module for OMS-9
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

489-2
Seaming Plier, 45° bent

Details

for seaming of metal sheets
forged, black laquered
jaw width 60 mm
high grade tool steel C60 / 1.0601

210A-...
Hexagon Tubular Box Spanner, inch

Details

for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

210M-...
Hexagon Tubular Box Spanner, metric

Details

for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube, hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

210S...AF
Hexagon Tubular Box Spanner-Sets, inch

Details

carton box packed
for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

show more show less

210S...M
Hexagon Tubular Box Spanner-Sets, metric

Details

carton box packed
for use with tommy bar ELORA-No. 211 or stepped tommy bar ELORA-No. 212-1
hollow shaft made of seamless steel tube
hardened
matt chrome plated
tommy bars are not included
ELORA-Tempering steel C 45 / 1.0503
according to DIN 896, Form B, ISO 2236, ISO 1085

show more show less

211-...
Tommy Bars

Details

for hexagon tubular box spanners No. 210 and 217
hardened, chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 900, Form A

212-...
Stepped Tommy Bars

Details

for hex. tubular box spanners ELORA-No. 206, 210 and 217
hardened, chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 900, Form C

213-...
Hexagon Nut Driver, flexible

Details

nonslip QUATROLIT®-2K-handle
with suspension hole
limited torque!
chrome plated

214-...
Hexagon Nut Driver with T-Handle

Details

short and long type
plastic T-handle with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

215-...
Hexagon Nut Driver, short

Details

short version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208

216-...
Hexagon Nut Driver, long, metric

Details

long version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3125, ISO 2725-1

216A-...
Hexagon Nut Driver, long, inch

Details

long version
nonslip QUATROLIT®-2K-handle
with suspension hole
matt chrome plated
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 3125, ISO 2725-1

217-...
Tubular Box Spanner with Handle

Details

long version
with drilled hole for tommy bars
for use with tommy bars ELORA-No. 211
with QUATROLIT®-handle
with suspension hole
seamless steel tube, hardened
matt chrome plated
Chrome-Vanadium 31 CrV 3 / 1.2208

show more show less

218-.../220-...
Tubular Spark Plug Wrench

Details

for spark plugs of size 16 mm (5/8" AF)
to operate with tommy bar ELORA-No. 229D
female square drive according to DIN 3120-C 10, ISO 1174 respectively DIN 3120-C 12,5, ISO, with ball retaining groove
made of seamless precision tube
hardened, matt chrome-plated
high grade tool steel C45/1.0503
tommy bars are not included

219
Tubular Spark Plug Wrench

Details

to operate with tommy bar ELORA-No. 229D
with rubber insert 20,8 mm
hollow shaft made of seamless tube
hardened
matt chrome-plated
high grade tool steel C45/1.0503
tommy bars are not included

222-...
Spark Plug Wrench

Details

pattern with swivelling actuating bracket
hardened, chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

227
Drain Plug Wrench

Details

for loosening and tightening of oil female square drive screws
matt chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

229D
Tommy Bar

Details

for tubular spark plug wrench ELORA-No. 218, 219, 220
hardened, matt chrome-plated
ELORA-Chrome-Vanadium 31CrV3 / 1.2208

231-...
Mounting Check Plug

Details

for positioning of drill bores
shaft tolerance h9
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

232-...
Piston Ring Compressors

Details

for pre-loading of the piston rings during insertion of the pistons into the cylinder
light pattern, continuously adjustable
wrench included
high-tensile spring band steel C75 / 1.0605

232S-...
Piston Ring Compressors

Details

for pre-loading of the piston rings during insertion of the pistons into the cylinder
heavy pattern, continuously adjustable
wrench included
high-tensile spring band steel C75 / 1.0605

234
Valve Spring Retainer Plier

Details

for inserting valve spring retainer
metal sheet, nickel plated

235-...
Piston Ring Pliers

Details

for inserting and removing piston rings
nickel-plated, with plastic handles
high grade tool steel C45 / 1.0503

235-60
Piston Ring Plier

Details

with prism holder for safe spreading of different piston rings
nickel plated
prism holder gunmetal-finish
high grade tool steel C45 / 1.0503

237-...
Flexible Magnetic Lifter

Details

for lifting small parts in hard to reach places
with flexible shaft
Shaft made of steel
2-C QUATROLIT handle with hanging hole

241SB-...
Cutting and Flaring Sets

Details

3 pcs.
for beading of copper and light alloy tubes
flaring cone 90 ° hardened, corresponds to 45 ° at the tube
body made of zinc die-cast
jaws made of steel, smooth inside, phosphated
pipe cutter with a cutting wheel and two guide rollers
ergonomic rotary knob with integrated trim knife
painted, gunmetal finished spindle
cutting wheel made of high alloy special steel

show more show less

242B-500
Oil Spray Can

Details

Model with flexible spray tube and pump lever
Container made of steel, plastic cover

243MB
Balance Weight Plier

Details

for loosening, tightening and cutting of balance weights on rims
for setting retaining springs on balance weights
chrome-plated
Chrome-Vanadium 31CrV3 / 1.2208

244-1
Hose Clamp Plier

Details

for simple self spanning wire hose clamps (e.g. washing machines)
lockable in 3 positions
nickel-plated
jaws made of high grade tool steel C45 / 1.0503

244-2
Hose Clamp Plier

Details

for simple self spanning wire hose clamps (e.g. washing machines)
with rotable jaws
clamping range 40 mm
nickel plated
jaws made of high grade tool steel C45 / 1.0503

244-3
Hose Clamp Plier

Details

for spring band clamps e.g. for VW, Audi and Opel
with rotatable jaws
clamping range 6-12 mm
nickel-plated
jaws made of high grade tool steel C45 / 1.0503

244-4
Hose Clamp Plier

Details

for mounting of self spanning, spring strip and space-saving clamp
for clamps Ø 7-60 mm
due to bowden cable operating mechanism (610 mm) suitable for difficult to reach areas
nickel-plated, joint gunmetal-finish
high grade tool steel

244-C
Clic-Hose Clamp Plier

Details

for CLIC-Hose clamps on fuel feed pipes(e.g. VW, Audi, Peugeot)
opening and closing of the hose clamps by turning the Plier 180°
with fix jaws, bent by 90°
span width 20 mm
nickel-plated, joint gunmetal-finish
high grade tool steel

249
Contact File

Details

for cleaning and adjusting of spark plug contacts
Cut 2 second
high grade tool steel C45/1.0503

249-S6
Contact File Set

Details

6 pcs.
for cleaning and adjusting of spark plug contacts
in a plastic storage wallet
Cut 2, second
high grade tool steel C45/1.0503

250FB
File Brush

Details

working area 250 x 40 mm
rugged wooden handle with wear-resistant steel wire spiked band

252
Battery Terminal Brush

Details

with external round brush to clean the cable clamps and internal brush for cleaning battery terminals
packed in plastic box

253
Door Panelling Extraction Plier

Details

for dismounting of the securing clips on door panelling, garnish mouldings and bumpers
nickel-plated, jaws and joint gunmetal-finish
high grade tool steel

257-...
Hacksaw Blades, Flexible wire saw

Details

to use with Hacksaw Frames ELORA-No. 257-...
specially hardened version with eyelets

257-110
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-50
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-55
Hacksaw Frame

Details

for saw blades and rod saw blades with 150 mm length
incl. saw blade ELORA-No. 257-S
handle made of plastic with reinforced glass fiber
hacksaw frame zinc coated

257-A
Junior Hacksaw Frame

Details

with adjustable wooden handle
for marquetry (Coping) saw blades and rod saw blades with 150 mm length
incl. coping saw blade ELORA-No. 257-S
Hacksaw frame made of steel

257-F
Junior Hacksaw Frame

Details

with fixed red laquered wooden handle
for marquetry (Coping) saw blades and rod saw blades with 150 mm length
incl. coping saw blade ELORA-No. 257-S
Hacksaw frame made of steel

257-PS
Hacksaw Blade Set

Details

in carton box
to use with Hacksaw Frames ELORA-No. 257-...
specially hardened version with eyelets

258...
Thread Restoring File

Details

for the repair of damaged internal and external threads
special steel
for metric-, imperial- and SAE-threads

259-...
Mounting Drift Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

260-...
Flat Chisel, flat oval

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6453

260-S5
Chisel Set

Details

5 pcs.
in black plastic rolling pouch
completely hardened and tempered
striking heads inductive tempered
working edges ground and oiled
shafts black lacquered
ELORA-Chrome-Vanadium 59CrV / 1.2242
according to DIN 6453

show more show less

2601-...
Torque Multiplier

Details

planetary gear (1-, 2- or 3-stepped)
specially hardened gear wheels
permanent internal greasing
sliding bearings on drive side and power take-off side
overload protection (one additional sun wheel with overload cutout is included)
exchangeable drive heads
matt chrome-plated /phosphated surfaces
bi-directional actuation
highest torque, high accuracy better than +-5% tolerance
attention, only for static actuation
in waterproof case

show more show less

261-...
Cape Chisel, flat oval

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6453

262-...
Flat Chisel, octagonal

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

263-...
Cross-Cut Chisel, octagonal

Details

for metal work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

264-...
Drift Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

264K
Drift Punch Set

Details

6 pcs.
in metal box
completely hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 6458

show more show less

265-...
Centre Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328
according to DIN 7250

266K
Chisel and Punch Set

Details

6 pcs.
in metal box
completely hardened and striking heads inductive tempered
working edge sharpened and oiled
shaft black coated

OMS-15L
Empty Module

Details

empty module for OMS-15
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,0 cm, Depth: 18,9 cm
hard foam insert

270
Battery Tester

Details

for diagnostics of the charging system and the voltage status of car and motorcycle batteries
measuring range 6 and 12 Volt up to 1000 CCA
easy to read scale, for up to 100 Ampere

270-S8
Pin Punch Set

Details

8 pcs.
in black metal box
with movable guide sleeve
ELORA-No. 250-59 with fix guide sleeve
fine ground and polished
shaft knurled
driving point made of 115CrV3 / 1.2210, 55-59 HRC

271-...
Parallel Pin Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

271K
Parallel Pin Punch Set

Details

6 pcs.
in metal box
completely inductive hardened and tempered
striking heads inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 6450

show more show less

272-...
Three Square Hollow Ground Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat-treated steel

273-...
Bearing Scraper or Hollow Ground Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat-treated steel

274-...
Three Square Hollow Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat treated steel
DIN 8350, shape C

276-...
Hollow Scraper

Details

black-painted version with wooden handle
ground work surfaces
heat treated steel
DIN 8350, shape A

277
Battery Acid Tester

Details

for testing the acid density on conventional batteries with screw caps
with areometer

280-...
Suction Lifter

Details

for lifting and carrying material with plain, gas-tight surfaces
suction mechanism with security locking
acid- and oil resistant
ELORA-No. 280-40: one suction cup
ELORA-No. 280-80: two suction cups
plastic housing, suction cups made of rubber

280G
Suction lifter with Flexible Heads

Details

Especially suitable for car glass and domed surfaces
suction mechanism with security locking
acid- and oil resistant
plastic housing, suction cups made of rubber

283HS
Hand Guard

Details

hand protection against impacts
no rolling away due to octagonal shape
suitable for all ELORA chisels, except ELORA-No. 361
flat oval 20 x 12, 23 x 13, 26 x 13 mm
octagonal 16, 18, 20 mm
made from impact resistant special rubber

284-250
Berlin Pattern Tin Snip

Details

for long straight cuts
blades additionally inductive hardened and ground, 56-58 HRC
adjustable, bolted joint
black handles, PVC dip coated, trap protection, opening spring
metal sheet thickness of max. 1,5 mm with a tensile strength of 400 N/mm² or 1 mm with 600 N/mm²
high grade tool steel, forged

285 S8/285 S10
Wad Punch Sets

Details

8 and 10 pcs.
in black plastic wallet
for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
lightly conical inside for easy removal of the cuttings
high grade steel
according to DIN 7200, Form A

show more show less

285-...
Wad Punch

Details

for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
lightly conical inside for easy removal of the cuttings
high grade steel
according to DIN 7200, Form A

286-...
Belt Punch

Details

for punching of carton, leather, rubber, sealing material and other soft material
forged, cutting edge hardened and ground
shaft red coated
high grade steel
according to DIN 7200, Form B

287
Battery Acid Filler

Details

for filling conventional batteries with screw caps
with rubber ball and PVC tube
acid-resistant

288-...
Bolt Cutter

Details

inductive hardened jaws on the cutter head
cutting capacity up to 48 HRC hardness
easy and precise readjusting with double eccentric screws
limbs made of steel tube with plastic handles
jaws made of special high grade tool steel
according to DIN ISO 9242

289-...
Steel Wire Mesh Cutter

Details

inductive hardened jaws on the cutter head
head angled at 75°
easy and precise readjusting with double eccentric screws
according to DIN 5743
limbs made of steel tube with plastic handles
jaws made of special high grade tool steel

290-1
Door Panelling Extraction Tool

Details

for dismounting of the securing clips
jaw open 6 mm
zinc-plated, black plastic handles
high grade tool steel
matt chrome-plated

290...
Seal Flat scraper

Details

ground work surfaces
non-slip QUATROLIT-2C-handle
heat treated steel

291-...
Claw

Details

for gripping small parts in hard to reach places
with flexible shaft, Ø 7mm
steel stem, operating piece made of plastic

292
File for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
rough milled
2-C-handle
Tool steel 140Cr3/1.2008

292-1
File for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
4-sides rough milled
2-C-handle
Tool steel 140Cr3/1.2008

293
Brush for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
narrow, bent pattern
plastic handle
bristles made of corrugated steel wire

293BS
Brush for Brake Service

Details

for removing braking dust and rust in the brake callipers of car disc brakes
narrow pattern, width 12 mm
bristles made of straight steel wire
2C-handle

294
Anti-Freeze Tester

Details

for quick and accurate testing of the freezing point temperature of the coolant liquid at any outside temperature
with 360° rotatable twin measuring element
aspirate ball made of elastomer, stays elastic and full functional at any outside temperature
hydrostatic block automatically avoids any leakage or reflow of air
made of robust technical plastics

295
Inspection Mirror

Details

for inspecting hard to see locations
round mirror with metal frame
with flexible shaft
shaft made of steel
2-C QUATROLIT handle with hanging hole

298
Inspection Set with Quick Change Chuck

Details

5-pieces set
Telescopic shaft with quick change chuck for holding mirror, magnifying glass or magnets
packed in a sturdy plastic case

5260-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

5130-ST
Electronic Positioning Tweezers

Details

for holding, positioning and unsoldering of vertical and horizontal cylindrical devices
anti-glare satin finish, grooved gripping surfaces
stainless, anti-magnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

3000-IS...
Screwdriver Bits 1/4"

Details

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, DIN ISO 1173
according to DIN ISO 2351-1

3010-IN...
Screwdriver Bits 1/4"

Details

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173
according to DIN ISO 2351-3

302
Brake Piston Reset Tool

Details

for resetting the pistons in brake disc callipers without screw thread reset adjuster
suitable for all common types of vehicles
nickel-plated, jaws gunmetal-finish
high grade tool steel C45 / 1.0503

3020-PH...
Screwdriver Bits 1/4"

Details

for cross slotted screws PH
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, DIN ISO 1173
according to ISO 2351-2, tip according to DIN ISO 8764-1 PH

3021-PZ...
Screwdriver Bits 1/4"

Details

for cross slotted screws PZ
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, ISO 1173
according to ISO 2351-2, tip according to DIN ISO 8764-1 PZ

3030-XZN...
Screwdriver Bits 1/4"

Details

for inside multi-point B &S and XZN screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173

304-S3
Mechanic's Plier Assortment

Details

3 pcs.
carton box packed
ground, with red dip insulated handles

304-S31
Mechanic's Plier Assortment

Details

3 pcs.
carton box packed

304-S4
Circlip Plier Set

Details

4 pcs.
carton box packed
red dip insulated handles

3040-RIB...
Screwdriver Bits 1/4"

Details

for RIBE®-CV-screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 6,3, ISO 1173
RIBE® = reg. trademark of Richard Bergner GmbH &Co KG, Schwabach

3050-IPR...
Screwdriver Bits 1/4"

Details

for TORX Plus®IPR-screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
external hexagon according to DIN 3126 C 6,3, ISO 1173
TORX Plus®= reg. trademark of Acument Intellectual Properties, LLC. USA

3050-TX...
Screwdriver Bits 1/4"

Details

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

3070-TTX...
Screwdriver Bits 1/4"

Details

for inside-TORX®safety screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 6,3, ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

310-...
Mechanical Nut Splitter

Details

to split fixed or overtightened nuts to strength class 6
zinc plated, inductive hardened chisel edge
Heat-treated steel

3100-IS...
Screwdriver Bits 5/16"

Details

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-1

3110-IN...
Screwdriver Bits 5/16"

Details

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-3

3120-PH...
Screwdriver Bits 5/16"

Details

for cross slotted screws PH
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH

3121-PZ...
Screwdriver Bits 5/16"

Details

for cross slotted screws PZ
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 C 8, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ

3130-XZN...
Screwdriver Bits 5/16"

Details

for inside multi-point B &S and XZN screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173

314S3
V-Belt Pulley Puller Set

Details

15 pcs. for following applications:
Variant 1 for V-belt pulleys with threaded holes
1 short beam for V-belt pulleys Ø 43-120 mm
1 long beam for V-belt pulley Ø 95-210 mm
3 exchangeable push-pieces to use as spindle extension
Variant 2 for V-belt pulley without threaded holes
1 short beam for V-belt pulleys Ø 24-100 mm
1 long beam for V-belt pulley Ø 85-195 mm
Hooks for narrow spaces for clamping depth up to 68 mm, respectively extension up to 88 mm
Variant 3 with 2 hooks to reach the rills of the V-belt pulley
1 short beam for V-belt pulleys Ø 80-140 mm
1 long beam for V-belt pulley Ø 135-235 mm
in a black plastic case 260 x 210 x 62 mm
high grade tool steel, zinc-plated
spindle and push-pieces gunmetal-finish

show more show less

315
Hydraulic Nut Splitter

Details

to split fixed or overtightened nuts up to strength class 10
Hydraulic execution
gunmetal finished spindle
High grade tool steel C45 / 1.0503

3150-TX...
Screwdriver Bits 5/16"

Details

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3128 C 8, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

316
Hydraulic Nut Splitter

Details

to split fixed or overtightened nuts up to strength class 10
hyraulic execution
high grade tool steel C45 / 1.0503

317-...
Standard Puller

Details

for pulling off ball bearings, gear-wheels, discs, etc.
heavy-duty, forged pattern
2 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

3170-TTX...
Screwdriver Bits 5/16"

Details

for inside-TORX®safety screws
ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive according to DIN 3126 C 8, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

318-S5
Mounting Wedge

Details

5 pcs.
carton box packed
suitable for works on panelling, dash board and garnish mouldings
special plastic POM, black

320-...
Puller

Details

for pulling off ball bearings, gear-wheels, v-belt pullers etc.
3 arms, with double-sided useable hook ends
zinc-plated, spindle gunmetal-finish
high grade tool steel

321-...
Carpenters

Details

for highest operational demands
inductive hardened cutting blades
cutting blades hardness 61-63 HRC
gunmetal-finish, ground head
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 9243 Form A

322-...
Puller

Details

for pulling off ball bearings at difficult to reach areas
with particularly narrow hooks
automatical fitting of the hooks due to scissor effect
zinc-plated, spindle gunmetal-finish
high grade tool steel

323-...
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
suitable for difficult to reach areas
zinc-plated, gunmetal-finish
high grade tool steel

324S15
Windscreen Wiper Arm Puller Set

Details

15 pcs.
for removing screen wiper arms
heavy-duty, forged pattern
zinc-plated, spindle gunmetal-finish
high grade tool steel
in black plastic box with plastic foam insert

325-..., 326-...
Separators and Tapered Blades

Details

for pulling off ball and roller bearings and close-fitting components
zinc-plated, spindles gunmetal-finish
high grade tool steel

325S-...
Puller/Separator Set

Details

containing one puller, one separator and one set of drawbar extensions
zinc-plated, spindle gunmetal-finish
in black plastic box with plastic foam insert

327-...
Universal Puller

Details

heavy-duty, forged pattern
3 arms
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle gunmetal-finish
high grade tool steel

327K-...
Universal Three Leg Pullers with Hooks

Details

heavy duty, forged pattern
3 arms with very narrow forged hooks
by turning the puller hooks usable as external and internal puller
zinc-plated, spindle and hook ends gunmetal-finish
high grade tool steel

328
Joint Bolt Puller

Details

for gentle removing of ball joint pivots on steering tie rods and stabilizers
zinc-plated
high grade tool steel

329-...
Separators

Details

for removing connecting rods, ball rods, drop arms etc.
massive forged pattern
handle knurled
zinc-plated
high grade tool steel

331
Welder's Chipping Hammer

Details

with steel tube handle
coated

3415
Hand Bit Holder 1/4"

Details

bit lock with permanent magnet
nonslip QUATROLIT®-2C-handle
with suspension hole
ELORA-Chrome-Vanadium 31CrV3 / 1.2208
female hexagon drive according to DIN 3126 D 6,3, DIN ISO 1173

3436-S36
Bit-Box 1/4"

Details

36 pcs.
in black yellow plastic box with belt clip and suspension hole
magnetic bit holder ELORA-No. 4150-50, with male hexagonal drive according to DIN 3126 E 6,3
bits made of ELORA Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
35 bits with male hexagon drive according to DIN 3126 C 6,3
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

350-...
Screw Extractor

Details

for extracting broken screws and bolts with right-hand thread
chrome vanadium 58CrV4 / 1.8161

351S 5, 352S 6, 353S 8
Screw Extractor Set

Details

in black plastic box
for extracting broken screws and bolts with right-hand thread
chrome vanadium 58CrV4 / 1.8161

359
Mounting Punch

Details

completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Molybdenum-Vanadium 45CrMoV7 / 1.2328

361
Slit or Car Body Chisel, extra flat

Details

for car body work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

361HS
Hand Guard for Slit or Car Body Chisel

Details

hand protection against impacts
no rolling away due to octagonal shape
only for ELORA-No. 361
made of impact resistant special rubber

362-...
Bricklayer´s Chisel, flat oval

Details

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7254 Form A

364-...
Point Chisel, octagonal

Details

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242
according to DIN 7256

365-...
Electrician

Details

for stone work
completely hardened and tempered
striking head inductive tempered
working edge sharpened and oiled
shaft black coated
ELORA-Chrome-Vanadium 59CrV4 / 1.2242

370-...
Snipe Nose Pliers with side cutter, straight

Details

serrated gripping surface and side cutter
maximum stability under load of the blades by inductive hardening
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

371-...
Snipe Nose Pliers with side cutter, bent

Details

45° bent, serrated gripping surface and side cutter
maximum stability under load of the blades by inductive hardening
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

372-...
Internal Extractor

Details

for extracting close-fitting ball-bearings over the inner bearing ring
to use with counter support ELORA-No. 373
gunmetal-finish
high grade tool steel

372S13
Puller Set

Details

13 pcs.
3 Universal pullers for outside Ø 10-160 mm
7 internal pullers for bores Ø 10-75 mm
2 support braces
1 slide hammer
high grade tool steel
in black plastic box with plastic foam insert

372S9
Internal Extractor Set

Details

9 pcs.
for extracting ball-bearings, ball-bearingrings and bushinger with a bore diameter of Ø 10–75 mm
high grade tool steel
in black plastic box with plastic foam insert

373-...
Counter Supports

Details

counter support for internal extractor ELORA-No. 372
zinc-plated, spindle gunmetal-finish
high grade tool steel

376-160
Flat Nose Plier

Details

for holding and bending
long, flat jaws, rippled serrated surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

377-160
Round Nose Plier

Details

long jaws, serrated gripping surface
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5745

383-J1-J4
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
straight jaws
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form C

383-J11-J41
Circlip Pliers for internal retaining ring

Details

for internal retaining rings acc. to DIN 472, DIN 984
jaws bent at 90°
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5256 Form D

384-A0-A4
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
straight jaws, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form A

384-A01-A41
Circlip Pliers for external retaining ring

Details

for external retaining rings acc. to DIN 471, DIN 983
jaws bent at 90°, self-opening due to mounted spiral spring
gunmetal-finish, ground joint
red dip insulated handles
ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
according to DIN 5254 Form B

385
Hand Lever Grease Gun

Details

high-quality industrial design with short stroke
continuous fixation, air release valve on the pump head
fat lead by means of spring force in the press head
dummy lubrication excluded
Working pressure 400 bar, test pressure 800 bar, capacity about 1.9 cc / stroke
filling can be done with bulk grease (500cc) or cartridge (400g)
incl. reinforced hose (1000 bar burst pressure) and hollow nozzle
housing made of steel, painted silver, black plastic handle

show more show less

389-...
Heavy Duty Side Cutter

Details

high cutting performance with minimal effort
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for hardened steel wire, piano wire (tensile strength 2300 N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

392-...
Side Cutter

Details

oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
ground, with red dip insulated handles
ELORA-high grade tool steel C60 / 1.0601
according to DIN ISO 5749

395-...
Combination Pliers

Details

strong edition for tough conditions
maximum stability under load of the blades by inductive hardening
cutting edge hardness: 63-64 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
serrated gripping surface and burner hole
ground, with red dip insulated handles
ELORA-high grade tool steel C45 / 1.0503
according to DIN ISO 5746

show more show less

400B-...
Letter Punch Sets

Details

27 pcs.
for driving letters by impact into steel
27 capital letters, from A to Z and ''&''
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

400Z-...
Number Punch Sets

Details

9 pcs.
for driving numbers by impact into steel
9 numbers from 0-9
in stable plastic box
completely hardened and tempered
striking heads inductive tempered
made of hard and tough steel
according to DIN 1451

show more show less

404-S3
Mechanic's Plier Set

Details

3 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

404-S31
Mechanic's Plier Set

Details

3 pcs.
carton box packed
chrome-plated, polished

404-S4
Electrician's Plier Set

Details

4 pcs.
carton box packed
nonslip QUATROLIT®-2C-handles
chrome-plated, polished

404-S41
Circlip Plier Set

Details

4 pcs.
carton box packed
chequered handles
chrome-plated, polished joint

404-S8
Circlip Plier Set

Details

8 pcs.
assortment in convenient plastic case
chrome plated, polished joint, chequered handles

5280-ST
Electronic Tweezer

Details

for all fine gripping and assembly work
anti-glare satin finish, grooved gripping surfaces
stainless, antimagnetic, acid-proof
ELORA-Special-Chrome-Nickel-steel

408
Step Arbor

Details

for expanding copper tubes
black, made of special steel

4100-IS...
Screwdriver Bits 1/4"

Details

for plain slotted screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-1

4110-IN
Screwdriver Bits 1/4"

Details

for inside hexagon screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-3

4120-PH...
Screwdriver Bits 1/4"

Details

for cross slotted screws PH
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PH

4130-PZ...
Screwdriver Bits 1/4"

Details

for cross slotted screws PZ
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
according to DIN ISO 2351-2, tip according to DIN ISO 8764-1 PZ

4150-...
Bitholder 1/4"

Details

bit lock with permanent magnet resp. spring clips
with stainless steel sleeve, diameter 9,5 mm
female hexagon drive according to DIN 3126- D 6,3
male hexagon drive according DIN 3126 E 6,3, DIN ISO 1173
according to DIN 7427 Form D

4160-TX...
Screwdriver Bits 1/4"

Details

for inside TORX®screws
ELORA-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon according to DIN 3126 E 6,3, DIN ISO 1173
TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA

432
Electronic Side Cutter

Details

oval head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finished, polished head
ELORA-high grade tool steel C60 / 1.0601

435
Electronic Side Cutter

Details

pointed head, lap joint, with double leaf spring
with dip insulated PVC handles
gunmetal-finish, polished head
ELORA-high grade tool steel C60 / 1.0601

4490
Bag or Wire Twister

Details

for fast and efficient closing of connecting tyre levers
with moulded plastic grip

4510
Electronic Side Cutter ESD

Details

for cutting in places difficult to access, for work with endangered electronic components
pointed, narrow head, small version with fine bevel, maximum stability under load of the cutting edges by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4520-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finished, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4530-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
oval head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4540
Electronic Side Cutter with Wire Trapping Spring ESD

Details

with trapping wire to cut off wire, for all work with electrostatic endangered components
oval head with wire trapping spring, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4550-...
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
pointed head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
M= with bevel
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

show more show less

4560
Electronic Side Cutter ESD

Details

for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4570
Electronic Oblique Tip Cutter ESD

Details

for virtually flush cutting of thin, soft wires in places difficult to access, for work with electrostatic endangered components
extra narrow head, fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-Chrome-Vanadium 80CrV2 / 1.2235
DIN ISO 9654, ESD: DIN IEC 614340-5-1

458
Revolving Punch and Eyelet Plier

Details

for pre-punching and pressing of eyelets 458S-4,5, 458S-5,0, 458S-5,5
bright nickel plated, with black ergonomically formed plastic handles
high-strength special tool steel

4580-...
Electronic Oblique Cutter ESD

Details

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
F= with fine bevel
O= without bevel
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

4590
Electronic Oblique Cutter ESD

Details

for frontal virtually flush cutting of wires, can be used horizontally and vertically for work with electrostatic endangered components
wide head, long cutting edges, with fine bevel, maximum stability under load by additional inductive hardening and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 61-63 HRC
ELORA-high grade tool steel C60 / 1.0601
DIN ISO 9654, ESD: DIN IEC 614340-5-1

460
Revolving Punch Plier with leverage

Details

70% power saving by leverage
for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
bright nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

461
Revolving Punch Plier

Details

for punching thin and strong awnings, fabrics, leather, textiles and thin metal sheet
punching hole diameter 2,0-2,5-3,0-3,5-4,0-4,5 mm
nickel plated, with black ergonomic formed plastic handles
high-strength special tool steel

4620
Electronic Tungsten Carbide Side Cutter ESD

Details

for cutting very hard materials with coincident maximum stability under load, for all work with electrostatic endangered components
oval head, with bevel, maximum stability under load due to carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

463
Glow Plug Plier

Details

straight edition
for plugging on and pulling down of deep-seated glow plugs
nonslip QUATROLIT®-2C-handles
matt chrome plated
ELORA-high grade tool steel C45 / 1.0503

4630
Electronic Tungsten Carbide Side Cutter ESD

Details

for cutting very hard wires which are difficult to access, for all work with electrostatic endangered components
pointed, narrow head with groove and fine bevel, small version, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

464-...
Spark Plug Plier

Details

hooked jaws
for difficult to pull down spark plug sockets
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

4640
Electronic Tungsten Carbide Oblique Cutter ESD

Details

for frontal virtually flush cutting of very hard wires, can be used horizontally and vertically for work with electrostatic endangered components
straight, compact, solid head, maximum stability under load by carbide inlay and box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶-10⁹ Ohm
cutting edge hardness 84-86 HRA
ELORA-Chrome-Vanadium 80 CrV2 / 1.2235 and special carbide metal
DIN ISO 9654, ESD: DIN IEC 614340-5-1

465-...
Spark Plug Pliers

Details

for difficult to access spark plug sockets
jaw length 50mm
matt chrome plated
nonslip QUATROLIT®-2C-handles
ELORA-high grade tool steel C45 / 1.0503

4660-...
Electronic Snipe Nose Pliers ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
short, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
OH = smooth gripping surface
MH = serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

466A-...
Cable End Sleeve Pliers

Details

for pressing of end-sleeves according to DIN 46228 part 1 and 4
with side cutter and wire stripping mechanism for soft wire
red handles, PVC dip insulated
ELORA-high grade steel C45 / 1.0503

4670
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, short jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
smooth gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

OMS-16L
Module Engineer Screwdrivers

Details

empty module for OMS-16
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

468-BI
Wire Stripper/Cutter

Details

side cutter with dual function (cutting and stripping of insulation)
stripping holes for single and multi-wire conductors with 1,5 mm² and 2,5 mm² diameter
oval head
maximum stability under load by inductive hardening
cutting edge hardness: 63-65 HRC
for medium hard wire, steel wire (tensile strength 1600N/mm²)
nonslip QUATROLIT®-2C-handles
chrome-plated, polished
ELORA-high grade tool steel C60 / 1.0601
similar DIN ISO 5749

show more show less

4680
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
long, straight jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

469
Circlip Plier for external retaining rings

Details

for external retaining rings without holes
straight jaws, self-opening due to mounted double leaf spring
chrome-plated, polished joint, chequered handles
ELORA-Chrome-Vanadium 31 CrV3 / 1.2208

4690
Electronic Snipe Nose Plier ESD

Details

for fine precision gripping and bending work, for work with electrostatic endangered components
angled, straight long jaws, half round tips, box joint, with double opening leaf spring, polished and high gloss gunmetal-finish, with 2-C ESD handles, surface resistance 10⁶–10⁹ Ohm
serrated gripping surface
ELORA-high grade tool steel C45 / 1.0503
DIN ISO 9655, ESD: DIN IEC 61340-5-1

Menu

Address

Contact

ELOFORT

Social Media

Mon – Thu		8.00 h – 12.30 h 13.00 h – 16.30 h
Fri		8.00 h – 12.30 h 13.00 h – 14.00 h