ELORA – Werkzeugfabrik GmbH https://www.elora.de/wp-content/uploads/2021/02/elora-logo.png Tool solutions in excellent quality Am Blaffertsberg 33 42899 Remscheid 02191-56270 02191-562719

ELORA tools are hot forged. As a result, a continuous fiber structure is achieved in the metal, which runs parallel to the outer shape. Thus, the stresses in the hand-operated tool are reduced to a minimum, this ensures increased durability and strength.

  • chrome-plated, polished
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove resp. with ball locking device
  • according to DIN 3123, ISO 3316
  • chrome-plated, polished
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • according to DIN 3123, ISO 3316
  • chrome-plated, polished
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove resp. with ball locking device
  • according to DIN 3123, ISO 3316
  • with plastic handle
  • for ELORA-No.770-S1K, Reversible Ratchet Head
  • for ELORA-Nr.770-S8, Flexible Head
  • for ELORA-Nr.770-S13, Sliding Head
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • nonslip QUATROLIT®-2C-handle
  • with suspension hole
  • matt chrome plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 10, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • matt chrome plated
  • plastic handle
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 10, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • plastic handle
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • hot forged
  • matt chrome-plated
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-D 20, ISO 1174, with locking pin
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • matt chrome-plated
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-D 20, ISO 1174, with locking pin
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • matt chrome-plated
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-D 20, ISO 1174, with locking pin
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • matt chrome-plated
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-D 20, ISO 1174, with locking pin
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • for outside TORX®screws
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • especially suitable for deep-set female screws on long threaded bolts
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • especially suitable for deep-set female screws on long threaded bolts
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • especially suitable for deep-set female screws on long threaded bolts
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • especially suitable for deep-set female screws on long threaded bolts
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • matt chrome-plated
  • Chrome-Vanadium 31 CrV 3 / 1.2208
  • female square according to DIN 3120-D 25, ISO 1174, with locking pin
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • matt chrome-plated
  • Chrome-Vanadium 31 CrV 3 / 1.2208
  • female square according to DIN 3120-D 25, ISO 1174, with locking pin
  • according to DIN 3124, ISO 2725-1
  • 27 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 8 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 18 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 20 pcs.
  • in black metal storage case with OMS-hard foam insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • 12 pcs.
  • suitable for inside TORX®screws resp. inside TORX®safety screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • operation tools according to DIN 3122, ISO 3315
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • 13 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • 14 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • 16 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • 16 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • 21 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • 32 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • 34 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • operation tools according to DIN 3122, ISO 3315
  • INM=9 pcs., INA=7 pcs., INMTIN=9 pcs. titan-coated
  • for inside hexagon screws
  • in black metal storage case with plastic insert
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
show more show less
  • INM=12 pcs., INA=9 pcs.
  • for inside hexagon screws
  • in black metal storage case with plastic insert
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
show more show less
  • 11 pcs.
  • suitable for inside TORX®resp. inside-TORX®safety screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • socket parts according to DIN 3122, ISO 3315
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • 9 pcs.
  • for inside multi-point screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 28 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 31 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 19 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 15 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 26 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 57 pcs.
  • in black metal storage case with OMS-hard foam insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 18 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 29 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 31 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 25 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 27 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 30 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 9 pcs.
  • suitable for inside TORX® resp. inside-TORX® safety screws
  • in black metal storage case with plastic insert
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
show more show less
  • 30 pcs.
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174
  • operation tools according to DIN 3122, ISO 3315
  • 14 pcs.
  • in black metal storage case
  • square drive according to DIN 3120, ISO 1174, with locking pin
  • socket parts according to DIN 3122, ISO 3315
  • 13 pcs.
  • suitable for outside TORX®screws
  • in black metal storage case with plastic insert
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • 7 pcs.
  • for inside multi-point screws
  • in black metal storage case with plastic insert
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
show more show less
  • 17-pcs.
  • suitable for inside- and outside TORX® screws
  • in black metal storage case with OMS-hard foam insert
  • female square according to DIN 3120-C, 12,5, ISO 1174, with ball retaining groove
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • matt chrome-plated
  • with plastic handle
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • male square according to DIN 3120-B 20, ISO 1174, with locking pin
  • according to DIN 3122, ISO 3315
  • appropriate for injection nozzles on Diesel engine vehicles
  • size 27 mm, recessed internal contour
  • hot-forged
  • chrome-plated
  • knurled
  • female square drive according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • heavy gauge sheet steel, black lacquered
  • sockets: knurled, chrome-plated, polished, with ball retaining groove
  • sockets: Chrome-Vanadium 31CrV3 / 1.2208
  • sockets: 1/2" square drive according to DIN 3120/ ISO 1174, for manual drive, sizes according to DIN 3124/ ISO 2725
  • heavy gauge sheet steel, black lacquered
  • sockets: knurled, chrome-plated, polished, with ball retaining groove
  • sockets: Chrome-Vanadium 31 CrV 3, Code-No. 1.2208
  • sockets: 1/2" square drive according to DIN 3120/ ISO 1174, for manual drive, sizes according to DIN 3124/ ISO 2725
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • square drive according to DIN 3120, ISO 1174, with ball retaining groove resp. with locking pin
  • according to DIN 3123, ISO 3316
  • chrome plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • square drive according to DIN 3120, ISO 1174
  • according to DIN 3123, ISO 3316
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • especially suitable for deep-set female screws on long threaded bolts
  • hot forged
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • according to DIN 3124, ISO 2725-1
  • for outside TORX®screws
  • chrome-plated, polished
  • knurled
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • TORX®= reg. trademark of Acument Intellectual Properties, LLC. USA
  • matt chrome plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 10, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-B 20, ISO 1174, with locking pin
  • according to DIN 3122, ISO 3315
  • chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-A 12,5, ISO 1174, with ball locking device
  • according to DIN 3122, ISO 3315
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • male square according to DIN 3120-B 25, ISO 1174, with locking pin
  • according to DIN 3122, ISO 3315
  • for use with tommy bar ELORA-No. 770-S7
  • ELORA-Chrome-Vanadium 31 CrV 3 / 1.2208
  • male square according to DIN 3120-B 20, ISO 1174, with locking pin
  • for inside hexagon screws
  • matt chrome-plated
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-D 20, ISO 1174, with locking pin
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for inside hexagon screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for inside hexagon screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for inside hexagon screws
  • maximum swivel angle 15°
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • for inside TORX® screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside hexagon screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for inside multi-point B &S and XZN screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
show more show less
  • for plain slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 2380-1 Form B
  • for inside hexagon screws with bore hole
  • with pin for IC-screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • for cross slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 8764-1 PH
  • for cross slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 8764-1 PZ
  • for inside multi-point B &S and XZN screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
show more show less
  • for RIBE®-CV-screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • RIBE® = reg. trademark of Richard Bergner GmbH &Co KG, Schwabach
  • for Inside-TORX® safety screws
  • with bore hole in tip
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
show more show less
  • for inside TORX® screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for plain slotted screws
  • chrome-plated, polished
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 12,5, ISO 1174
  • with ball retaining groove
  • for inside hexagon screws
  • matt chrome-plated
  • ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-D 25, ISO 1174, with locking pin
  • according to DIN 7422
  • for inside hexagon screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for inside hexagon screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for Inside-TORX® safety screws
  • with bore hole in tip
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
show more show less
  • for inside TORX® screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for inside TORX® screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA
  • for plain slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • Female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 2380-1 Form B
  • for inside hexagon screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • according to DIN 7422
  • for cross slotted screws
  • chrome-plated, polished
  • knurled
  • holder made of ELORA-Chrome-Vanadium 31CrV3 / 1.2208
  • female square according to DIN 3120-C 10, ISO 1174, with ball retaining groove
  • blade made of ELORA-Vanadium special steel, gunmetal finished
  • blade according to DIN ISO 8764-1 PH